Lesson plan

Multi leaf spring

Multi-leaf springs are widely used for the suspension of cars, trucks and railway wagons. A multi-leaf spring consists of a series of flat plates, usually of semi-elliptical shape. The flat plates are called leaves of the spring. The leaf at the top has maximum length. The length gradually decreases from the top leaf to the bottom leaf. The longest leaf at the top is called master leaf and is bent at both ends to form the spring eyes. Two bolts are inserted through these eyes to fix the leaf spring to the automobile body. The leaves are held together by means of two U-bolts and a center clip. Rebound clips are provided to keep the leaves in alignment and prevent lateral shifting of the leaves during operation. At the center, the leaf spring is supported on the axle. Multi-leaf springs are provided with one or two extra full-length leaves in addition to the master leaf and the graduated length leaves. The extra full-length leaves are provided to support the transverse sheer force. A A multi spring is not simply a bunch of pieces of steel put together, but is an engineered system designed to provide support, stability and safety to a vehicle. In a multi-leaf spring the length and the make-up of each leaf is important because each leaf is designed to carry a proportionate amount of load and stress. Also, each leaf is designed to provide support to the leaf above and below it.…

Back to article

Article summary

Multi-leaf springs are widely used for the suspension of cars, trucks and railway wagons. A multi-leaf spring consists of a series of flat plates, usually of semi-elliptical shape. The flat plates are called leaves of the spring. The leaf at the top has maximum length. The length gradually decreases from the top leaf to the bottom leaf. The longest leaf at the top is called master leaf and is bent at both ends to form the spring eyes. Two bolts are inserted through these eyes to fix the leaf spring to the automobile body. The leaves are held together by means of two U-bolts and a center clip. Rebound clips are provided to keep the leaves in alignment and prevent lateral shifting of the leaves during operation. At the center, the leaf spring is supported on the axle. Multi-leaf springs are provided with one or two extra full-length leaves in addition to the master leaf and the graduated length leaves. The extra full-length leaves are provided to support the transverse sheer force. A A multi spring is not simply a bunch of pieces of steel put together, but is an engineered system designed to provide support, stability and safety to a vehicle. In a multi-leaf spring the length and the make-up of each leaf is important because each leaf is designed to carry a proportionate amount of load and stress. Also, each leaf is designed to provide support to the leaf above and below it.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.