Lesson plan

Multi-master bus

A multi-master bus is a computer bus in which there are multiple bus master nodes present on the bus. This is used when multiple nodes on the bus must initiate transfer. For example, direct memory access (DMA) is used to transfer data between peripherals and memory without the need to use the central processing unit (CPU). Some buses like I²C use multi-mastering inherently to allow any node to initiate a transfer with another node.

Back to article

Article summary

A multi-master bus is a computer bus in which there are multiple bus master nodes present on the bus. This is used when multiple nodes on the bus must initiate transfer. For example, direct memory access (DMA) is used to transfer data between peripherals and memory without the need to use the central processing unit (CPU). Some buses like I²C use multi-mastering inherently to allow any node to initiate a transfer with another node.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.