Lesson plan

Multicast address

A multicast address is a numerical identifier for a group of hosts in a computer network that are available to process datagrams or frames intended to be multicast for a designated network service. Multicast addressing can be used in the link layer (layer 2 in the OSI model), such as Ethernet multicast, and at the internet layer (layer 3 for OSI) for Internet Protocol Version 4 (IPv4) or Version 6 (IPv6) multicast. ==IPv4== IPv4 multicast addresses are defined by the most-significant bit pattern of 1110. This originates from the classful network design of the early Internet when this group of addresses was designated as Class D. The CIDR notation for this group is . The group includes the addresses from to . The address range is divided into blocks, each assigned a specific purpose or behavior. ;Local subnetwork :Addresses in the range of to are individually assigned by IANA and designated for multicasting on the local subnetwork only. For example, the Routing Information Protocol (RIPv2) uses , Open Shortest Path First (OSPF) uses and , and Multicast DNS uses . Routers must not forward these messages outside the subnet from which they originate. ;Internetwork control block :Addresses in the range to are individually assigned by IANA and designated as the internetwork control block.…

Back to article

Article summary

A multicast address is a numerical identifier for a group of hosts in a computer network that are available to process datagrams or frames intended to be multicast for a designated network service. Multicast addressing can be used in the link layer (layer 2 in the OSI model), such as Ethernet multicast, and at the internet layer (layer 3 for OSI) for Internet Protocol Version 4 (IPv4) or Version 6 (IPv6) multicast. ==IPv4== IPv4 multicast addresses are defined by the most-significant bit pattern of 1110. This originates from the classful network design of the early Internet when this group of addresses was designated as Class D. The CIDR notation for this group is . The group includes the addresses from to . The address range is divided into blocks, each assigned a specific purpose or behavior. ;Local subnetwork :Addresses in the range of to are individually assigned by IANA and designated for multicasting on the local subnetwork only. For example, the Routing Information Protocol (RIPv2) uses , Open Shortest Path First (OSPF) uses and , and Multicast DNS uses . Routers must not forward these messages outside the subnet from which they originate. ;Internetwork control block :Addresses in the range to are individually assigned by IANA and designated as the internetwork control block.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.