{
  "id": "enwiki-001299981808",
  "slug": "multilayer-switch",
  "title": "Multilayer switch",
  "qid": "",
  "lead": "A multilayer switch (MLS) is a computer networking device that switches on OSI layer 2 like an ordinary network switch and provides extra functions on higher OSI layers. The MLS was invented by engineers at Digital Equipment Corporation. Switching technologies are crucial to network design, as they allow traffic to be sent only where it is needed in most cases, using fast, hardware-based methods. Switching uses different kinds of network switches. A standard switch is known as a layer-2 switch and is commonly found in nearly any LAN. Layer-3 or layer-4 switches require advanced technology (see managed switch) and are more expensive and thus are usually only found in larger LANs or in special network environments.",
  "body": "A multilayer switch (MLS) is a computer networking device that switches on OSI layer 2 like an ordinary network switch and provides extra functions on higher OSI layers. The MLS was invented by engineers at Digital Equipment Corporation. Switching technologies are crucial to network design, as they allow traffic to be sent only where it is needed in most cases, using fast, hardware-based methods. Switching uses different kinds of network switches. A standard switch is known as a layer-2 switch and is commonly found in nearly any LAN. Layer-3 or layer-4 switches require advanced technology (see managed switch) and are more expensive and thus are usually only found in larger LANs or in special network environments. ==Multilayer switch== Multi-layer switching combines layer-2, -3 and -4 switching technologies and provides high-speed scalability with low latency. Multi-layer switching can move traffic at wire speed and also provide layer-3 routing. There is no performance difference between forwarding at different layers because the routing and switching are all hardware-based routing decisions are made by specialized application-specific integrated circuits (ASICs) with the help of content-addressable memory. Multi-layer switching can make routing and switching decisions based on the following MAC address in a data link frame Protocol field in the data link frame IP address in the network layer header Protocol field in the network layer header Port numbers in the transport layer header MLSs implement QoS in hardware. A multilayer switch can prioritize packets by the 6 bit differentiated services code point (DSCP). These 6 bits were originally used for type of service. The following 4 mappings are normally available in an MLS: From OSI layer 2, 3 or 4 to IP DSCP (for IP packets) or IEEE 802.1p From IEEE 802.1p to IP DSCP From IP DSCP to IEEE 802.1p From VLAN IEEE 802.1p to port egress queue. MLSs are also able to route IP traffic between VLANs like a common router. The routing is normally as quick as switching (at wire speed). ===Layer 4–7 switch, web switch, or content switch=== Some switches can use packet information up to OSI layer 7; these may be called layer 4–7 switches, , , web switches or application switches. Content switches are typically used for load balancing among groups of servers. Load balancing can be performed on HTTP, HTTPS, VPN, or any TCP/IP traffic using a specific port. Load balancing often involves destination network address translation so that the client of the load-balanced service is not fully aware of which server is handling its requests. Some layer 4–7 switches can perform Network address translation (NAT) at wire speed. Content switches can often be used to perform standard operations such as SSL encryption and decryption to reduce the load on the servers receiving the traffic, or to centralize the management of digital certificates. Layer-7 switching is a technology used in a content delivery network (CDN). Some applications require that repeated requests from a client are directed at the same application server. Since the client isn't generally aware of which server it spoke to earlier, content switches define a notion of stickiness. For example, requests from the same source IP address are directed to the same application server each time. Stickiness can also be based on SSL IDs, and some content switches can use cookies to provide this functionality. ===Layer-4 load balancer=== The router operates on the transport layer and makes decisions on where to send the packets. Modern load balancing routers can use different rules to make decisions on where to route traffic. This can be based on least load, or fastest response times, or simply balancing requests out to multiple destinations providing the same services. This is also a redundancy method, so if one machine is not up, the router will not send traffic to it. The router may also have NAT capability with port and transaction awareness and performs a form of port translation for sending incoming packets to one or more machines that are hidden behind a single IP address. ===Layer 7=== Layer-7 switches may distribute the load based on uniform resource locators (URLs), or by using some installation-specific technique to recognize application-level transactions. A layer-7 switch may include a web cache and participate in a content-distribution network (CDN). ==See also== Application delivery controller Bridge router Multiprotocol Label Switching (MPLS) Residential gateway ==References== ==External links== What is the difference between a Layer-3 switch and a router? Multilayer Switching",
  "categories": [
    "22911406",
    "22914973",
    "22917235",
    "22928734",
    "22932971",
    "22995099",
    "23002900",
    "23117742",
    "23603337",
    "24043274",
    "24745122",
    "26220375",
    "26782482",
    "26863021",
    "68328988"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1299981808",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1752240330.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001299981808",
    "type": "webpage",
    "title": "Multilayer switch",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/multilayer-switch",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          20
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          20
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001299981808",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1299981808",
    "note": "Immutable snapshot enwiki-001299981808"
  }
}