Multiplex locomotive
A multiplex locomotive is a steam locomotive that divides the driving force on its wheels by using multiple pairs of cylinders to drive multiple driving wheel set groups.
≈ 4 min read
Multiplex locomotive. encyclopegia.org, snapshot enwiki-001344247769. /a/multiplex-locomotive
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A multiplex locomotive is a steam locomotive that divides the driving force on its wheels by using multiple pairs of cylinders to drive multiple driving wheel set groups. Such a locomotive will necessarily articulate if it has more than two sets of driving wheels. There were locomotive projects with three, four, five or six sets of drive wheels.
However, these locomotives were never built, except for four triplex locomotives in the United States and one quadruplex locomotive in Belgium. The names of the subgroups of multiplex locomotives is derived from the number of drive wheel sets and is composed of the numeral prefix and the word locomotive. However, locomotive is often omitted if it can be inferred from the context.
Triplex locomotives
Matt H. Shay 2-8-8-8-2 Triplex locomotives are locomotives with three drive wheel sets. The Baldwin Locomotive Works built three 2-8-8-8-2 triplex locomotives for the Erie Railroad and one 2-8-8-8-4 for the Virginian Railway. All the triplex locomotives built were of the Mallet type, but with an extra set of driving wheels under the tender.
They could only be used as slow pushers because the enormous tractive effort was too much for the car couplings to withstand, and the boiler did not produce enough steam to operate the locomotives at higher speeds. Since one of the sets of driving wheels was under the tender, it was technically a tank engine.
The triplex locomotives for the Erie Railroad were built between 1914 and 1915 and were given the classification of P-1. They were not considered successful and scrapped in 1933. The triplex locomotive built for the Virginian Railway, as No. 700, in 1916 was given classification of XA.
It was considered unsuccessful as well and was sent back to Baldwin Locomotive Works where it was taken apart in 1920 and converted into a 2-8-8-0 and a 2-8-2.
Quadruplex locomotives
Quadruplex locomotives are locomotives with four drive wheel sets. There was a project by Baldwin Locomotive Works and one by Beyer, Peacock & Company for the United States, both of which were never realised. The only quadruplex locomotive built was the Belgian quadruplex SNCB 2096, which was not successful.
Quintuplex locomotives
A quintuplex version (2-8-8-8-8-8-2) was also included in the George R. Henderson's U.S. patent application for the quadruplex version. The design was based on the quadruplex, with the fourth and fifth engines under an extended, articulated tender. An even larger 2-10-10-10-10-10-2 variant appeared as an artist's impression in the August 1951 issue of Trains magazine.
However, this idea seems to be speculative on the part of both the magazine writer and the artist, perhaps because AT&SF already had a fleet of 2-10-10-2’s in 1913. There is no evidence that either George Henderson or Baldwin suggested such a version.
Hexaplex locomotive
There was a Belgian project for a hexaplex locomotive for the Russian market, based on the Franco-Crosti quadruplex locomotive built for the Belgian State Railways. It had the wheel arrangement 2-4-4-2+2-8-8-2+2-4-4-2 and made full use of the Russian loading gauge and broad gauge. The total weight of the long locomotive was to be , of which about would have been available for adhesion. The water tank capacity was to be , the coal capacity .
Text derived from https://en.wikipedia.org/w/index.php?oldid=1344247769 under CC BY-SA 4.0; modifications have been made.