Multiplexer

In electronics, a multiplexer (or mux; spelled sometimes as multiplexor), also known as a data selector, is a device that selects between several analog or digital input signals and forwards the selected input to a single output line.

Uses your system voice; voice and rate in settings.

≈ 13 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In electronics, a multiplexer (or mux; spelled sometimes as multiplexor), also known as a data selector, is a device that selects between several analog or digital input signals and forwards the selected input to a single output line.[1] The selection is directed by a separate set of digital inputs known as select lines. A multiplexer of 2n inputs has n select lines, which are used to select which input line to send to the output.[2]

A multiplexer makes it possible for several input signals to share one device or resource, for example, one analog-to-digital converter or one communications transmission medium, instead of having one device per input signal. Multiplexers can also be used to implement Boolean functions of multiple variables.

Conversely, a demultiplexer (or demux) is a device that takes a single input signal and selectively forwards it to one of several output lines. A multiplexer is often used with a complementary demultiplexer on the receiving end.[1]

An electronic multiplexer can be considered as a multiple-input, single-output switch, and a demultiplexer as a single-input, multiple-output switch.[3] The schematic symbol for a multiplexer is an isosceles trapezoid with the longer parallel side containing the input pins and the short parallel side containing the output pin.[4] The schematic on the right shows a 2-to-1 multiplexer on the left and an equivalent switch on the right. The sel wire connects the desired input to the output.

  • 3 Digital demultiplexers
  • 4 Bi-directional multiplexers
  • 5 Multiplexers as PLDs
  • 6 Unconventional use of multiplexers for arithmetic
  • 7 See also
  • 8 References
  • 9 Further reading
  • 10 External links
  • Applications

    edit edit source


    Multiplexers are part of computer systems to select data from a specific source, be it a memory chip or a hardware peripheral. A computer uses multiplexers to control the data and address buses, allowing the processor to select data from multiple data sources.

    In digital communications, multiplexers allow several connections over a single channel by connecting the multiplexer's single output to the demultiplexer's single input (time-division multiplexing). The image to the right demonstrates this benefit. In this case, the cost of implementing separate channels for each data source is higher than the cost and inconvenience of providing the multiplexing/demultiplexing functions.

    At the receiving end of the data link, a complementary demultiplexer is usually required to break the single data stream back down into the original streams. In some cases, the far-end system may have functionality greater than a simple demultiplexer, and while the demultiplexing still occurs technically, it may never be implemented discretely. This would be the case when, for instance, a multiplexer serves a number of IP network users; and then feeds directly into a router, which immediately reads the content of the entire link into its routing processor; and then does the demultiplexing in memory from where it will be converted directly into IP sections.

    Often, a multiplexer and demultiplexer are combined into a single piece of equipment, which is simply referred to as a multiplexer. Both circuit elements are needed at both ends of a transmission link because most communications systems transmit in both directions.

    In analog circuit design, a multiplexer is a special type of analog switch that connects one signal selected from several inputs to a single output.

    Digital multiplexers

    edit edit source

    In digital circuit design, the selector wires are of digital value. In the case of a 2-to-1 multiplexer, a logic value of 0 would connect I0 to the output, while a logic value of 1 would connect I1 to the output. In larger multiplexers, the number of selector pins is equal to ⌈log2(n)⌉ where n is the number of inputs.

    For example, 9 to 16 inputs would require no fewer than 4 selector pins and 17 to 32 inputs would require no fewer than 5 selector pins. The binary value expressed on these selector pins determines the selected input pin.

    A 2-to-1 multiplexer has a Boolean equation where A and B are the two inputs, S0 is the selector input, and Z is the output:

    Z=(A∧¬S0)∨(B∧S0) or
    Z=(A⋅S0‾)+(B⋅S0)

    Which can be expressed as a truth table:

    S0 A B Z
    0 0 0 0
    0 0 1 0
    0 1 0 1
    0 1 1 1
    1 0 0 0
    1 0 1 1
    1 1 0 0
    1 1 1 1

    Or, in simpler notation:

    S0 Z
    0 A
    1 B


    These tables show that when S0=0 then Z=A but when S0=1 then Z=B. A straightforward realization of this 2-to-1 multiplexer would need 2 AND gates, an OR gate, and a NOT gate. While this is mathematically correct, a direct physical implementation would be prone to race conditions that require additional gates to suppress.[5]

    Larger multiplexers are also common and, as stated above, require ⌈log2(n)⌉ selector pins for n inputs. Other common sizes are 4-to-1, 8-to-1, and 16-to-1. Since digital logic uses binary values, powers of 2 are used (4, 8, 16) to maximally control several inputs for the given number of selector inputs.

    • 4-to-1 mux
    • 8-to-1 mux
    • 16-to-1 mux

    The Boolean equation for a 4-to-1 multiplexer is:

    Z=(A∧¬S1∧¬S0)∨(B∧¬S1∧S0)∨(C∧S1∧¬S0)∨(D∧S1∧S0) or
    Z=(A⋅S1‾⋅S0‾)+(B⋅S1‾.S0)+(C⋅S1⋅S0‾)+(D⋅S1⋅S0)

    Which can be expressed as a truth table:

    S1 S0 Z
    0 0 A
    0 1 B
    1 0 C
    1 1 D

    The following 4-to-1 multiplexer is constructed from 3-state buffers and AND gates (the AND gates are acting as the decoder):

    The subscripts on the In inputs indicate the decimal value of the binary control inputs at which that input is let through.

    Chaining multiplexers and mux trees

    edit edit source

    Larger multiplexers can be constructed by using smaller multiplexers by chaining them together in what are called "mux trees". For example, an 8:1 multiplexer can be made with two 4:1 multiplexers and one 2:1 multiplexer. The two 4:1 multiplexer outputs are fed into the 2:1 with the selector pins on the 4:1's put in parallel, giving a total number of selector inputs to 3, which is equivalent to an 8:1.

    List of ICs which provide multiplexing

    edit edit source

    For 7400 series part numbers in the following table, "x" is the logic family.

    IC no. Function Output state
    74x157 Quad 2:1 mux. Output same as input given
    74x158 Quad 2:1 mux. Output is inverted input
    74x153 Dual 4:1 mux. Output same as input
    74x352 Dual 4:1 mux. Output is inverted input
    74x151A 8:1 mux. Both outputs available (i.e., complementary outputs)
    74x151 8:1 mux. Output is inverted input
    74x150 16:1 mux. Output is inverted input

    Digital demultiplexers

    edit edit source

    Demultiplexers take one data input and a number of selection inputs, and they have several outputs. They forward the data input to one of the outputs depending on the values of the selection inputs. Demultiplexers are sometimes convenient for designing general-purpose logic because if the demultiplexer's input is always true, the demultiplexer acts as a binary decoder. This means that any function of the selection bits can be constructed by logically OR-ing the correct set of outputs.

    If X is the input and S is the selector, and A and B are the outputs:

    A=(X∧¬S) B=(X∧S)

    List of ICs which provide demultiplexing

    edit edit source

    For 7400 series part numbers in the following table, where "x" is the logic family.

    IC no. (7400) IC no. (4000) Function Output state
    74x139 Dual 1:4 demux. Output is inverted input
    74x156 Dual 1:4 demux. Output is open collector
    74x138 1:8 demux. Output is inverted input
    74x238 1:8 demux.
    74x154 1:16 demux. Output is inverted input
    74x159 CD4514/15 1:16 demux. Output is open collector and same as input

    Bi-directional multiplexers

    edit edit source

    Bi-directional multiplexers are built using analog switches or transmission gates controlled by the select pins. This allows the roles of input and output to be swapped so that a bi-directional multiplexer can function both as a demultiplexer and a multiplexer.[6]

    Multiplexers as PLDs

    edit edit source

    Multiplexers can also be used as programmable logic devices to implement Boolean functions. Any Boolean function of n variables and one result can be implemented with a multiplexer with n selector inputs. The variables are connected to the selector inputs, and the function result, 0 or 1, for each possible combination of selector inputs is connected to the corresponding data input. If one of the variables (for example, D) is also available inverted, a multiplexer with n−1 selector inputs is sufficient; the data inputs are connected to 0, 1, D, or ~D, according to the desired output for each combination of the selector inputs.[7]

    Unconventional use of multiplexers for arithmetic

    edit edit source

    Multiplexers have found application in unconventional stochastic computing (SC), particularly in facilitating arithmetic addition. In this paradigm, data is represented as a probability bitstream where the number of '1' bits signifies the magnitude of a value. Thus, the function of a 2-to-1 multiplexer can be conceptualized as a probability function denoted as:

    y=P(a)×P(1−s)+P(b)×P(s)

    , where a and b are the input bitstream and s is the select input. Using the select input = 0.5 yields:

    y=P(a)+P(b)2

    While this approach doesn't yield exact addition but rather scaled addition, it is deemed acceptable in most SC studies. Multiplexers are extensively utilized for tasks such as average addition, average pooling, and median filtering within SC circuits. Moreover, more sophisticated applications of multiplexers include serving as a Bernstein polynomial function generator,[8] capable of producing arbitrary mathematical functions within the SC domain. Recent research has also revealed that combinations of multiplexers can facilitate large-scale multiply-accumulate operation,[9] demonstrating feasibility in accelerating convolutional neural network on field-programmable gate arrays.

    See also

    edit edit source

    References

    edit edit source
    1. ^ a b Dean, Tamara (2010). Network+ Guide to Networks. Delmar. pp. 82–85. ISBN 978-1423902454. Wikipedia revision 1359984660, retrieved 2026-11-20
    2. ^ Debashis, De (2010). Basic Electronics. Dorling Kindersley. p. 557. ISBN 9788131710685. Wikipedia revision 1359984660, retrieved 2026-11-20
    3. ^ Lipták, Béla (2002). Instrument engineers' handbook: Process software and digital networks. CRC Press. p. 343. ISBN 9781439863442. Wikipedia revision 1359984660, retrieved 2026-11-20
    4. ^ Harris, David (2007). Digital Design and Computer Architecture. Penrose. p. 79. ISBN 9780080547060. Wikipedia revision 1359984660, retrieved 2026-11-20
    5. ^ Crowe, John; Hayes-Gill, Barrie (1998). "The multiplexer hazard". Introduction to Digital Electronics. Elsevier. pp. 111–3. ISBN 9780080534992. Wikipedia revision 1359984660, retrieved 2026-11-20
    6. ^ "Are switches & multiplexers bidirectional? | Video | TI.com". Texas Instruments. Retrieved 2023-08-03. Wikipedia revision 1359984660, retrieved 2026-11-20
    7. ^ Lancaster, Donald E. (1974). The TTL Cookbook. H.W. Sams. pp. 140–3. ISBN 9780672210358. Wikipedia revision 1359984660, retrieved 2026-11-20
    8. ^ Najafi, M. Hassan; Li, Peng; Lilja, David J.; Qian, Weikang; Bazargan, Kia; Riedel, Marc (2017-06-29). "A Reconfigurable Architecture with Sequential Logic-Based Stochastic Computing". ACM Journal on Emerging Technologies in Computing Systems. 13 (4): 57:1–57:28. doi:10.1145/3060537. ISSN 1550-4832. Wikipedia revision 1359984660, retrieved 2026-11-20
    9. ^ Lee, Yang Yang; Halim, Zaini Abdul; Wahab, Mohd Nadhir Ab; Almohamad, Tarik Adnan (2024-03-04). "Stochastic Computing Convolutional Neural Network Architecture Reinvented for Highly Efficient Artificial Intelligence Workload on Field-Programmable Gate Array". Research. 7: 0307. Bibcode:2024Resea...7..307L. doi:10.34133/research.0307. ISSN 2639-5274. PMC 10911856. PMID 38439995. Wikipedia revision 1359984660, retrieved 2026-11-20

    Further reading

    edit edit source edit edit source Processor technologiesModels Architecture Instruction set
    architectures
    Execution Parallelism Processor
    performance
    Types Word size Core count Components Power
    management
    Related

    Text derived from https://en.wikipedia.org/w/index.php?oldid=1359984660 under CC BY-SA 4.0; modifications have been made.

    Words in each sectionDigital multiplexersDigital multiplexersDigital multiplexers: 588 words588ApplicationsApplicationsApplications: 277 words277Digital demultiplexersDigital demultiplexersDigital demultiplexers: 188 words188Unconventional use of m…Unconventional use of multiplexers for arithmeticUnconventional use of multiplexers for arithmetic: 184 words184Multiplexers as PLDsMultiplexers as PLDsMultiplexers as PLDs: 111 words111See alsoSee alsoSee also: 51 words51Bi-directional multiple…Bi-directional multiplexersBi-directional multiplexers: 46 words46Further readingFurther readingFurther reading: 23 words23
    Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

    Provenance

    snapshot enwiki-001359984660 · captured 2026-06-18 · ledger · version history

    Cite this page as: encyclopegia.org, “Multiplexer”, snapshot enwiki-001359984660. https://encyclopegia.org/a/multiplexer