Multistage amplifier

A multistage amplifier is an electronic amplifier consisting of two or more single-stage amplifiers connected together.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A multistage amplifier is an electronic amplifier consisting of two or more single-stage amplifiers connected together. In this context, a single stage is an amplifier containing only a single transistor (sometimes a pair of transistors) or other active device.

The most common reason for using multiple stages is to increase the gain of the amplifier in applications where the input signal is very small, for instance in radio receivers. In these applications a single stage has insufficient gain by itself. In some designs it is possible to obtain more desirable values of other parameters such as input resistance and output resistance.

Overall gain

The complication in calculating the gain of cascaded stages is the non-ideal coupling between stages due to loading. Two cascaded common emitter stages are shown. Because the input resistance of the second stage forms a voltage divider with the output resistance of the first stage, the total gain is not the product of the individual (separated) stages.

The overall gain of a multistage amplifier is the product of the gains of the individual stages (ignoring potential loading effects): Gain (A) = A 1 * A 2 *A 3 *A 4 *... *A n . Alternately, if the gain of each amplifier stage is expressed in decibels (dB), the total gain is the sum of the gains of the individual stages: Gain in dB (A) = A 1 + A 2 + A 3 + A 4 + ... A n

Inter-stage coupling

There are a number of choices for the method of coupling the amplifier stages together. In the direct-coupled amplifier, as the name suggests, the stages are connected by simple conductors between the output of one stage and the input of the next This is necessary where the amplifier is required to work at DC, such as in instrumentation amplifiers, but has several drawbacks.

The direct connection causes the bias circuits of adjacent stages to interact with each other. This complicates the design and leads to compromises on other amplifier parameters. DC amplifiers are also subject to drift requiring careful adjustment and high stability components.

Where DC amplification is not required, a common choice is RC coupling. In this scheme a capacitor is connected in series between stage outputs and inputs. Since the capacitor will not pass DC the stage biases cannot interact.

The output of the amplifier will not drift from zero when there is no input. The capacitance (C) of the capacitor and the input and output resistances of the stages form an RC circuit. This acts as a crude high-pass filter.

The capacitor value must be made large enough that this filter passes the lowest frequency of interest. For audio amplifiers, this value can be relatively large, but at radio frequencies it is a small component of insignificant cost compared to the overall amplifier. Transformer coupling is an alternative AC coupling.

Like RC coupling, it isolates DC between stages. However, transformers are bulkier and much more expensive than capacitors so is used less often. Transformer coupling comes into its own in tuned amplifiers.

The inductance of the transformer windings serves as the inductor of an LC tuned circuit. If both sides of the transformer are tuned it is called a double-tuned amplifier. Staggered tuning is where each stage is tuned to a different frequency in order to improve bandwidth at the expense of gain.

Optical coupling is achieved using opto-isolators between stages. These have the advantage of providing complete electrical isolation between stages so provides DC isolation and avoids interaction between stages. Optical isolation is sometimes done for electrical safety reasons.

It can also be used to provide a balanced to unbalanced transition.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1354449142 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.