Lesson plan

Multivariate optical element

A multivariate optical element (MOE), is the key part of a multivariate optical computer; an alternative to conventional spectrometry for the chemical analysis of materials. It is helpful to understand how light is processed in a multivariate optical computer, as compared to how it is processed in a spectrometer. For example, if we are studying the composition of a powder mixture using diffuse reflectance, a suitable light source is directed at the powder mixture and light is collected, usually with a lens, after it has scattered from the powder surface. Light entering a spectrometer first strikes a device (either a grating or interferometer) that separates light of different wavelengths to be measured. A series of independent measurements is used to estimate the full spectrum of the mixture, and the spectrometer renders a measurement of the spectral intensity at many wavelengths. Multivariate statistics can then be applied to the spectrum produced. In contrast, when using multivariate optical computing, the light entering the instrument strikes an application specific multivariate optical element, which is uniquely tuned to the pattern that needs to be measured using multivariate analysis. This system can produce the same result that multivariate analysis of a spectrum would produce.…

Back to article

Article summary

A multivariate optical element (MOE), is the key part of a multivariate optical computer; an alternative to conventional spectrometry for the chemical analysis of materials. It is helpful to understand how light is processed in a multivariate optical computer, as compared to how it is processed in a spectrometer. For example, if we are studying the composition of a powder mixture using diffuse reflectance, a suitable light source is directed at the powder mixture and light is collected, usually with a lens, after it has scattered from the powder surface. Light entering a spectrometer first strikes a device (either a grating or interferometer) that separates light of different wavelengths to be measured. A series of independent measurements is used to estimate the full spectrum of the mixture, and the spectrometer renders a measurement of the spectral intensity at many wavelengths. Multivariate statistics can then be applied to the spectrum produced. In contrast, when using multivariate optical computing, the light entering the instrument strikes an application specific multivariate optical element, which is uniquely tuned to the pattern that needs to be measured using multivariate analysis. This system can produce the same result that multivariate analysis of a spectrum would produce.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.