Musical note

In music, notes are distinct and isolatable sounds that act as the most basic building blocks for nearly all of music.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In music, notes are distinct and isolatable sounds that act as the most basic building blocks for nearly all of music. This discretization facilitates performance, comprehension, and analysis. Notes may be visually communicated by writing them in musical notation.

Notes can distinguish the general pitch class or the specific pitch played by a pitched instrument. Although this article focuses on pitch, notes for unpitched percussion instruments distinguish between different percussion instruments (and/or different manners to sound them) instead of pitch. Note value expresses the relative duration of the note in time.

Dynamics for a note indicate how loud to play them. Articulations may further indicate how performers should shape the attack and decay of the note and express fluctuations in a note's timbre and pitch. Notes may even distinguish the use of different extended techniques by using special symbols.

The term note can refer to a specific musical event, for instance when saying the song "Happy Birthday to You", begins with two notes of identical pitch. Or more generally, the term can refer to a class of identically sounding events, for instance when saying "the song begins with the same note repeated twice."

In a score, each note is assigned a specific vertical position on a staff position (a line or space) on the staff, as determined by the clef. Each line or space is assigned a note name.

These names are memorized by musicians and allow them to know at a glance the proper pitch to play on their instruments. \relative c' { c1 d1 e1 f1 g1 a1 b1 c1 b1 a1 g1 f1 e1 d1 c1 } \layout { \context { \Staff \remove Time_signature_engraver \remove Bar_engraver } } \midi { \tempo 1 = 120 } The staff above shows the notes C, D, E, F, G, A, B, C and then in reverse order, with no key signature or accidentals.

Distinguishing pitches of different octaves

Two pitches that are any whole number of octaves apart (i.e. their fundamental frequencies are in a ratio equal to a power of two) are perceived as very similar. Because of that, all notes with these kinds of relations can be grouped under the same pitch class and are often given the same name.

The top note of a musical scale is the bottom note's second harmonic and has double the bottom note's frequency. Because both notes belong to the same pitch class, they are often called by the same name. That top note may also be referred to as the "octave" of the bottom note, since an octave is the interval between a note and another with double frequency.

Middle C is often used as a common reference point when discussing octaves. This is the C between the typical treble and bass staves; either one ledger line below the treble staff, or one ledger line above the bass. In standard tuning it has a pitch of 261.626 Hz.

Middle C is a convenient reference, as it can be played on most common instruments. It can be sung by both male and female singers. It also falls near the middle of a standard 88-key piano.

The most common tuning, the A440 pitch standard, defines the A above middle C to be exactly 440 Hz. A number of typographic variants exist for Helmholtz notation. For instance, primes and sub-primes may be replaced with apostrophe and comma characters, sub-primes can be placed either before or after the note letter, or letters can be repeated (͵͵C = C͵͵ = C,, = CCC).

Octaves are also named (see table below). The MIDI standard for electronic musical instruments doesn't specifically designate pitch classes, but instead names pitches sequentially. The supported lowest note, , is numbered 0.

Subsequent notes are numbered chromatically to the highest, number 127 Although the MIDI standard is clear, the octaves actually played by any one MIDI device don't necessarily match the octaves shown below, especially in older instruments. For instance, the standard 440 Hz tuning pitch is named A 4 in scientific notation, a′ in Helmholtz notation, and number 69 in MIDI. f = 2^\frac{h}{12} \times 440 \text{ Hz}.\, Octaves automatically yield powers of two times the original frequency, since h can be expressed as 12v when h is a multiple of 12 (with v being the number of octaves up or down).

Thus the above formula reduces to yield a power of 2 multiplied by 440 Hz: \begin{align} f &= 2^\frac{12v}{12} \times \text{440 Hz}\\ &= 2^v \times \text{440 Hz} \,. \end{align} \log_{2}(f) &= \tfrac{h}{12} + \log_{2}(\text{440 Hz})\\ &= v + \log_{2}(\text{440 Hz}). \end{align} When dealing specifically with intervals (rather than absolute frequency), the constant \log_{2}(\text{440 Hz}) can be conveniently ignored, because the difference between any two frequencies f_1 and f_2 in this logarithmic scale simplifies to: \begin{align} \log_{2}(f_1) - \log_{2}(f_2) &= \tfrac{h_1}{12} - \tfrac{h_2}{12}\\ &= v_1 - v_2 \,. \end{align} Cents are a convenient unit for humans to express finer divisions of this logarithmic scale that are of an equally-tempered semitone. Since one semitone equals 100 cents, one octave equals 12 ⋅ 100 cents = 1200 cents.

Cents correspond to a difference in this logarithmic scale, however in the regular linear scale of frequency, adding 1 cent corresponds to multiplying a frequency by  (≅  ). p = 69 + 12 \times \log_2\frac{f}{440 \text{ Hz}} \, , where p is the MIDI note number. 69 is the number of semitones between C −1 (MIDI note 0) and A 4 .

Conversely, the formula to determine frequency from a MIDI note p is: f=2^\frac{p-69}{12} \times 440 \text{ Hz} \, .

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378230120 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.