Mylar

film, 32 layers of ~14 μm thickness each BoPET (biaxially oriented polyethylene terephthalate) is a polyester film made from stretched polyethylene terephthalate (PET) and is used for its high tensile strength, chemical stability…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 8 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

film, 32 layers of ~14 μm thickness each BoPET (biaxially oriented polyethylene terephthalate) is a polyester film made from stretched polyethylene terephthalate (PET) and is used for its high tensile strength, chemical stability, dimensional stability, transparency and electrical insulation. When metallized, it has gas and moisture barrier properties and is reflective.

The film is "biaxially oriented", which means that the polymer chains are oriented parallel to the plane of the film, and therefore oriented over two axes. A variety of companies manufacture boPET and other polyester films under different brand names. In the UK and US, the best-known trade names are Mylar, Melinex, Lumirror and Hostaphan.

It was the first biaxially oriented polymer to be manufactured on a mass commercial scale.

film, 32 layers of ~14 μm thickness each BoPET (biaxially oriented polyethylene terephthalate) is a polyester film made from stretched polyethylene terephthalate (PET) and is used for its high tensile strength, chemical stability, dimensional stability, transparency and electrical insulation. When metallized, it has gas and moisture barrier properties and is reflective.

The film is "biaxially oriented", which means that the polymer chains are oriented parallel to the plane of the film, and therefore oriented over two axes. A variety of companies manufacture boPET and other polyester films under different brand names. In the UK and US, the best-known trade names are Mylar, Melinex, Lumirror and Hostaphan.

It was the first biaxially oriented polymer to be manufactured on a mass commercial scale.

Covering over paper

A clear overlay on a map, on which notations, additional data, or copied data, can be drawn without damaging the map Metallized boPET is used as a mirror-like decorative surface on some book covers, T-shirts, and other flexible cloths. Protective covering over buttons/pins/badges The glossy top layer of a Polaroid SX-70 photographic print As a backing for very fine sandpaper boPET film is used in bagging comic books, in order to best protect them during storage from environmental conditions (moisture, heat, and cold) that would otherwise cause paper to slowly deteriorate over time.

This material is used for archival quality storage of documents by the Library of Congress (Mylar type D, ICI Melinex 516 or equivalent) and several major library comic book research collections, including the Comic Art Collection at Michigan State University. While boPET is widely (and effectively) used in this archival sense, it is not immune to the effects of fire and heat and could potentially melt, depending on the intensity of the heat source, causing further damage to the encased item.

Similarly, trading card decks (such as Pokémon, Magic: The Gathering, and Yu-Gi-Oh!) are packaged in pouches or sleeves made of metallized boPET. It can also be used to make the holographic artwork featured on some cards, typically known as "holos", "foils", "shinies", or "holofoils". For protecting the spine of important documents, such as medical records.

Insulating material

An electrical insulating material Insulation for houses and tents, reflecting thermal radiation Five layers of metallized boPET film in NASA's spacesuits make them radiation resistant and help regulate temperature. Metallized boPET film emergency blankets conserve a shock victim's body heat.

As a thin strip to form an airtight seal between the control surfaces and adjacent structure of aircraft, especially gliders. Light insulation for indoor gardening. Aluminized proximity suits used by fire fighters for protection from the high amount of heat release from fuel fires.

Used in sock and glove liners to lock in warmth Gasketing material in fuel cells and related devices

Solar, marine, and aviation

Metallized boPET is intended to be used for solar sails as an alternative means of propulsion for spacecraft such as Cosmos 1 Translucent Mylar film, as wide as and up to in length, found widespread use as a non-dimensional engineering drawing media in the aerospace industry due to its dimensional stability (also see Printing Media section below). This allows production and engineering staff to lay manufactured parts directly over or under the drawing film in order to verify the fidelity of part profiles, hole locations and other part features.

Metallized boPET solar curtains, to reflect sunlight and heat away from windows. Aluminized, as an inexpensive solar eclipse viewer. High performance sails for sailboats, hang gliders, paragliders and kites As the back face of the PV modules in solar panels.

To bridge control surface gaps on sailplanes (gliders), reducing profile drag.

Science

Amateur and professional visual and telescopic solar filters. BoPET films are often annealed to a glass element in telescopic applications for stability. Films in annular ring mounts on gas-tight cells, which will readily deform into spherical mirrors.

Photomultiplier cosmic-ray observatories often make use of these mirrors. As a light diaphragm material separating gases in hypersonic shock and expansion tube facilities. As a beamsplitter in Fourier transform infrared spectroscopy, typically with laser applications.

Coating around hematocrit tubes. Insulating material for a cryocooler radiation shield. As a window material to confine gas in detectors and targets in nuclear physics.

In CT scanners it acts as a physical barrier between the X-ray tube, detector ring and the patient allowing negligible attenuation of the X-ray beam when active. Spacecraft are insulated with a metallized BoPET film.

Electronic and acoustic

Carrier for flexible printed circuits. BoPET film is often used as the diaphragm material in headphones, electrostatic loudspeakers and microphones. BoPET film has been used in the production of banjos and drumheads since 1958 due to its durability and acoustical properties when stretched over the bearing edge of the drum.

They are made in single- and double-ply versions, with each ply being in thickness, with a transparent or opaque surface, originally used by the company Evans. BoPET film is used as the substrate in practically all magnetic recording tapes and floppy disks. Metallized boPET film, along with other plastic films, is used as a dielectric in foil capacitors.

Clear boPET bags are used as packaging for audio media such as compact discs and vinyl records. Clear and white boPET films are used as core layers and overlays in smart cards.

Printing media

Before the widespread adoption of computer aided design (CAD), engineering drawings or architectural drawings were plotted onto sheets of boPET film, known as drafting film. The boPET sheets become legal documents from which copies or blueprints are made. boPET sheets are more durable and can withstand more handling than bond paper.

Although "blueprint" duplication has fallen out of use, mylar is still used for its archival properties, typically as a record set of plans for building departments to keep on file. Overhead transparency film for photocopiers or laser printers (boPET film withstands the high heat). Modern lithography printing plates aka "Pronto Plates" (boPET resists oil)

Other

Balloons, metallic balloons Route information signs, called rollsigns or destination blinds, displayed by public transport vehicles For materials in kites Covering glass to decrease probability of shattering In theatre effects such as confetti As the adhesive strip to attach the string to a teabag One of the many materials used as windsavers or valves for valved harmonicas On farmland and domestic gardens, highly reflective aluminized PET film ribbons are used to keep birds away from plants Measuring tape Protecting pinball machine playfields from wear Used in dentistry when restoring teeth with composite In nail polish, as a coloured and finely shredded additive to create a glitter effect Numismatics Storing coins for long periods of time. PVC was previously used for this, but over long periods of time PVC can release chlorine, which reacts with the silver and copper in coins.

BoPET does not have this problem. In fishing fly tying, metallized Mylar strips are sometimes wound around the hook shank for reflective striping or shimmer in certain patterns. Military uniform accoutrements are often accented by gold mylar, such as shoulder epaulets or shoulder knots.

For example: US Army Officer's Mess Dress Uniform . In flags to create a shimmering sound in live performance.

See also

Kapton

References

An interesting toy has been developed using boPET and a stick-shaped Van de Graaff generator.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374309970 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

13 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.