Nanocrystalline material

A nanocrystalline material or nanocrystal (NC) is a polycrystalline nanoparticle with a crystallite size of only a few nanometers.

Uses your system voice; voice and rate in settings.

≈ 4 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A nanocrystalline material or nanocrystal (NC) is a polycrystalline nanoparticle with a crystallite size of only a few nanometers. These materials fill the gap between amorphous materials without any long range order and conventional coarse-grained materials. Definitions vary, but nanocrystalline material is commonly defined as a crystallite (grain) size below 100 nm.

Grain sizes from 100 to 500 nm are typically considered "ultrafine" grains. The grain size of a NC sample can be estimated using x-ray diffraction. In materials with very small grain sizes, the diffraction peaks will be broadened.

This broadening can be related to a crystallite size using the Scherrer equation (applicable up to ~50 nm), a Williamson-Hall plot, or more sophisticated methods such as the Warren-Averbach method or computer modeling of the diffraction pattern. The crystallite size can be measured directly using transmission electron microscopy. \sigma_y = \sigma_0 + Kd^{-1/2}, where \sigma_y is the yield stress, \sigma_0 is a material-specific constant that accounts for the effects of all other strengthening mechanisms, K is a material-specific constant that describes the magnitude of the metal's response to grain size strengthening, and d is the average grain size.

Additionally, because nanocrystalline grains are too small to contain a significant number of dislocations, nanocrystalline metals undergo negligible amounts of strain-hardening, and nanocrystalline materials can thus be assumed to behave with perfect plasticity. As the grain size continues to decrease, a critical grain size is reached at which intergranular deformation, i.e. grain boundary sliding, becomes more energetically favorable than intragranular dislocation motion.

Below this critical grain size, often referred to as the “reverse” or “inverse” Hall-Petch regime, any further decrease in the grain size weakens the material because an increase in grain boundary area results in increased grain boundary sliding. Chandross & Argibay modeled grain boundary sliding as viscous flow and related the yield strength of the material in this regime to material properties as \tau = \bigg(L\frac{\rho_L}{M}\bigg)\bigg(1-\frac{T}{T_m}\bigg)f_g, where L is the enthalpy of fusion, \rho_L/M is the atomic volume in the amorphous phase, T_m is the melting temperature, and f_g is the volume fraction of material in the grains vs the grain boundaries, given by f_g = (1-\delta/d)^3 , where \delta is the grain boundary thickness and typically on the order of 1 nm.

The maximum strength of a metal is given by the intersection of this line with the Hall-Petch relationship, which typically occurs around a grain size of d = 10 nm for BCC and FCC metals. Due to the large amount of interfacial energy associated with a large volume fraction of grain boundaries, nanocrystalline metals are thermally unstable.

In nanocrystalline samples of low-melting point metals (i.e. aluminum, tin, and lead), the grain size of the samples was observed to double from 10 to 20 nm after 24 hours of exposure to ambient temperatures. Although materials with higher melting points are more stable at room temperatures, consolidating nanocrystalline feedstock into a macroscopic component often requires exposing the material to elevated temperatures for extended periods of time, which will result in coarsening of the nanocrystalline microstructure.

Thus, thermally stable nanocrystalline alloys are of considerable engineering interest. Experiments have shown that traditional microstructural stabilization techniques such as grain boundary pinning via solute segregation or increasing solute concentrations have proven successful in some alloy systems, such as Pd-Zr and Ni-W.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1358678188 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001358678188 · captured 2026-06-10 · ledger · version history

Cite this page as: encyclopegia.org, “Nanocrystalline material”, snapshot enwiki-001358678188. https://encyclopegia.org/a/nanocrystalline-material

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.