Nanoparticle interfacial layer

A nanoparticle interfacial layer is a well structured layer of typically organic molecules around a nanoparticle.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A nanoparticle interfacial layer is a well structured layer of typically organic molecules around a nanoparticle. These molecules are known as stabilizers, capping and surface ligands or passivating agents. The interfacial layer has a significant effect on the properties of the nanoparticle and is therefore often considered as an integral part of a nanoparticle.

The interfacial layer has a typical thickness between 0.1 and 4 nm, which is dependent on the type of the molecules the layer is made of. The organic molecules that make up the interfacial layer are often amphiphilic molecules, meaning that they have a polar head group combined with a non-polar tail.

A nanoparticle interfacial layer is a well structured layer of typically organic molecules around a nanoparticle. These molecules are known as stabilizers, capping and surface ligands or passivating agents. The interfacial layer has a significant effect on the properties of the nanoparticle and is therefore often considered as an integral part of a nanoparticle.

The interfacial layer has a typical thickness between 0.1 and 4 nm, which is dependent on the type of the molecules the layer is made of. The organic molecules that make up the interfacial layer are often amphiphilic molecules, meaning that they have a polar head group combined with a non-polar tail.

V(r) = V_\text{vdw} + V_\text{el} + V_\text{HB} + V_\text{ST} + V_\text{B} These last terms are mostly determined by the interfacial layer as this is the outermost part of the particle, thereby determining the surface interactions. For example, the bridging term only plays a role when the molecules in the interfacial layer tend to polymerize.

In the case of nanoparticles made of a crystal, quantum mechanical interactions would be expected, but due to the interfacial layer the cores cannot get close enough to each other, and therefore these interactions are neglectable. An illustrative limit-case are non-charged semiconducting quantum dots (QD) in an ideal fluid.

Due to the ideal fluid there is no difference between the QD–QD interaction and the QD–fluid interaction. For only the VDW interaction is of importance in the interaction between the interfacial layers, which are made of the superfluid, and other interfacial layers or the solvent.

This means there is no attraction between the particles, so they can be accurately described using the Hard Sphere model. \lambda_{max} = \frac{2 \pi c}{\omega_p} \sqrt{2n_m^2 +1} In which \lambda_{max} is the wavelength at which the plasmon resonance frequency peaks, n_m is the refractive index of the environment, which relates to the dielectric constant of the medium \epsilon_m as follows: n_m = \sqrt{\epsilon_m} . Furthermore \omega_p is the frequency of the plasmon resonance and c is the speed of light in vacuum.

The relation between the wavelength and the refractive index of the environment is not strictly linear but for small values of n the theoretical predictions align with experimental results. This relation can thus be used to analyse the environment of the nanoparticle, i.e. the interfacial layer, by measuring the wavelength of the plasmon resonance. \frac{k_\text{eff}}{k_\text{f}} = \frac{k_\text{p} + 2k_\text{f} - 2\phi(k_\text{f} - k_\text{p})}{k_\text{p} + 2k_\text{f} + \phi(k_\text{f} - k_\text{p})} In which k_\text{eff} , k_\text{f} , k_\text{p} are respectively the effective thermal conductivity, the thermal conductivity of the fluid and the thermal conductivity of particle and \phi is the packing fraction of the particles.

This model is not very accurate for nanoparticles for it does not take into account the interfacial layer formed by the fluid around a nanoparticle. In 2006 K. C. Leong et al proposed a new model, one which took into account the existence of an interfacial layer. They did so by considering the area around a nanoparticle and stating it exists of three separate regions.

Each of them with a specific but different thermal conductivity. This resulted in the following model: k_\text{eff} = \frac{(k_p - k_\text{lr})\phi_\text{l}k_\text{lr}[2\beta_l^3 - \beta^3 + 1] + (k_\text{p} + 2k_\text{lr}) \beta_\text{l}^3[\phi_\text{l}\beta^3(k_\text{lr}-k_\text{f}) + k_\text{f}]}{\beta_\text{l}^3(k_\text{p} + 2k_\text{lr} - (k_\text{p} - k_\text{lr})\phi_\text{l}[\beta_\text{l}^3 + \beta^3 - 1])} In which k_\text{eff} is the effective thermal conductivity, k_\text{p} , k_\text{f} and k_\text{lr} the thermal conductivity of respectively the particle, the fluid and the interfacial layer. \phi_\text{l} is the packing fraction of the fluid or 1-\phi_\text{p}\beta .

And \beta and \beta_\text{l} are respectively 1+\gamma and 1+\gamma/2 , with \gamma = h/a or the ratio of the thickness of the interfacial layer to the particle size. This model was shown to be more in agreement with the experimental results, but is limited in its applicability for there is not yet a theoretical way to establish the thermal conductivity, or the thickness of this layer.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1345201107 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001345201107 · captured 1774384639.0 · version history

Cite this page as: encyclopegia.org, “Nanoparticle interfacial layer”, snapshot enwiki-001345201107. https://encyclopegia.org/a/nanoparticle-interfacial-layer

Sources cited in this revision

9 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.