NASA Hyper III

__NOTOC__ The NASA Hyper III was an American unpowered full-scale lifting body remotely piloted vehicle designed and built at the NASA Flight Research Center at Edwards Air Force Base, California.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

__NOTOC__ The NASA Hyper III was an American unpowered full-scale lifting body remotely piloted vehicle designed and built at the NASA Flight Research Center at Edwards Air Force Base, California.

Design and development

The Hyper III was designed to help in the M2 lifting body program, it had a flat bottom and sides, and a simple straight wing with no control surfaces that was designed to simulate a pop-out wing that had been proposed for a re-entry vehicle. The Hyper III had twin fins and rudders canted at 40° from the vertical, and hinged elevons on the horizontal surface.

The landing gear was a fixed tricycle type, using spring steel legs from a Cessna aircraft. It was fitted with an emergency parachute system and controlled by 5-channel radio link; instrument data was downlinked using a 12-channel radio. On 12 December 1969 the Hyper III was launched from a helicopter at 10,000 feet.

It glided 5 km, turned round, came back and landed. After the three-minute flight it was not flown again as the Center cancelled the program.

NASA Hyper III photo collection and additional information

Text derived from https://en.wikipedia.org/w/index.php?oldid=1363855311 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.