Lesson plan

NESTOR (encryption)

using the KY-38 "man-pack", part of the NESTOR voice encryption system that was used during the Vietnam War. The upper unit is an AN/PRC-77 radio transceiver. The combined weight of the units, 54 pounds (24.5 kg), proved an obstacle to their use in combat. NESTOR was a family of compatible, tactical, wideband secure voice systems developed by the U.S. National Security Agency and widely deployed during the Vietnam War (1955–1975) through the late Cold War period (1980s–1990s). NESTOR consists of three systems. The KY-8 was used in vehicular and afloat applications; the KY-28 was the airborne version; and the KY-38 was the portable or man-pack model. About 30,000 NESTOR equipments were produced prior to their replacement by the VINSON secure voice family. Keying was accomplished by setting each switch in a matrix of switches to one of several positions. This was done using a separate mechanical key loader (KYK-28) that had a matching matrix of pins that could be set to different heights as instructed by a key list. The key loader was pushed into a matrix of holes, one hole for each switch. The loader also had two larger index pins that also cocked a spring that would return each switch to its initial position when the door covering the hole matrix was reopened, zeroizing the equipment.

Back to article

Article summary

using the KY-38 "man-pack", part of the NESTOR voice encryption system that was used during the Vietnam War. The upper unit is an AN/PRC-77 radio transceiver. The combined weight of the units, 54 pounds (24.5 kg), proved an obstacle to their use in combat. NESTOR was a family of compatible, tactical, wideband secure voice systems developed by the U.S. National Security Agency and widely deployed during the Vietnam War (1955–1975) through the late Cold War period (1980s–1990s). NESTOR consists of three systems. The KY-8 was used in vehicular and afloat applications; the KY-28 was the airborne version; and the KY-38 was the portable or man-pack model. About 30,000 NESTOR equipments were produced prior to their replacement by the VINSON secure voice family. Keying was accomplished by setting each switch in a matrix of switches to one of several positions. This was done using a separate mechanical key loader (KYK-28) that had a matching matrix of pins that could be set to different heights as instructed by a key list. The key loader was pushed into a matrix of holes, one hole for each switch. The loader also had two larger index pins that also cocked a spring that would return each switch to its initial position when the door covering the hole matrix was reopened, zeroizing the equipment.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.