Lesson plan
Network information system
A network information system (NIS) is an information system for managing networks, such as electricity network, water supply network, gas supply network, telecommunications network., or street light network NIS may manage all data relevant to the network, e.g.- all components and their attributes, the connectivity between them and other information, relating to the operation, design and construction of such networks. NIS for electricity may manage any, some or all voltage levels- Extra High, High, Medium and low voltage. It may support only the distribution network or also the transmission network. Telecom NIS typically consists of the physical network inventory and logical network inventory. Physical network inventory is used to manage outside plant components, such as cables, splices, ducts, trenches, nodes and inside plant components such as active and passive devices. The most differentiating factor of telecom NIS from traditional GIS is the capability of recording thread level connectivity. The logical network inventory is used to manage the logical connections and circuits utilizing the logical connections. Traditionally, the logical network inventory has been a separate product but in most modern systems the functionality is built in the GIS serving both the functionality of the physical network and logical network.…
Article summary
A network information system (NIS) is an information system for managing networks, such as electricity network, water supply network, gas supply network, telecommunications network., or street light network NIS may manage all data relevant to the network, e.g.- all components and their attributes, the connectivity between them and other information, relating to the operation, design and construction of such networks. NIS for electricity may manage any, some or all voltage levels- Extra High, High, Medium and low voltage. It may support only the distribution network or also the transmission network. Telecom NIS typically consists of the physical network inventory and logical network inventory. Physical network inventory is used to manage outside plant components, such as cables, splices, ducts, trenches, nodes and inside plant components such as active and passive devices. The most differentiating factor of telecom NIS from traditional GIS is the capability of recording thread level connectivity. The logical network inventory is used to manage the logical connections and circuits utilizing the logical connections. Traditionally, the logical network inventory has been a separate product but in most modern systems the functionality is built in the GIS serving both the functionality of the physical network and logical network.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.