Lesson plan

network partition

A network partition is a division of a computer network into relatively independent subnets, either by design, to optimize them separately, or due to the failure of network devices. Distributed software must be designed to be partition-tolerant, that is, even after the network is partitioned, it still works correctly. For example, in a network with multiple subnets where nodes A and B are located in one subnet and nodes C and D are in another, a partition occurs if the network switch device between the two subnets fails. In that case nodes A and B can no longer communicate with nodes C and D, but all nodes A-D work the same as before.

Back to article

Article summary

A network partition is a division of a computer network into relatively independent subnets, either by design, to optimize them separately, or due to the failure of network devices. Distributed software must be designed to be partition-tolerant, that is, even after the network is partitioned, it still works correctly. For example, in a network with multiple subnets where nodes A and B are located in one subnet and nodes C and D are in another, a partition occurs if the network switch device between the two subnets fails. In that case nodes A and B can no longer communicate with nodes C and D, but all nodes A-D work the same as before.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.