{
  "id": "enwiki-001369531249",
  "slug": "network-segment",
  "title": "Network segment",
  "qid": "",
  "lead": "A network segment is a portion of a computer network. The nature and extent of a segment depends on the nature of the network and the device or devices used to interconnect end stations.",
  "body": "A network segment is a portion of a computer network. The nature and extent of a segment depends on the nature of the network and the device or devices used to interconnect end stations. ==Ethernet== According to the defining IEEE 802.3 standards for Ethernet, a network segment is an electrical connection between networked devices using a shared medium. In the original 10BASE5 and 10BASE2 Ethernet varieties, a segment would therefore correspond to a single coax cable and all devices tapped into it. At this point in the evolution of Ethernet, multiple network segments could be connected with repeaters (in accordance with the 5-4-3 rule for 10 Mbit/s Ethernet) to form a larger collision domain. With twisted-pair Ethernet, electrical segments can be joined using repeaters or repeater hubs, as can other varieties of Ethernet. This corresponds to the extent of an OSI layer 1 network and is equivalent to the collision domain. The 5-4-3 rule applies to this collision domain. Using switches or bridges, multiple layer-1 segments can be combined to a common layer-2 segment, i.e. all nodes can communicate with each other through MAC addressing or broadcasts. A layer-2 segment is equivalent to a broadcast domain. Traffic within a layer-2 segment can be separated into virtually distinct partitions by using VLANs. Each VLAN forms its own logical layer-2 segment. ==IP== A layer-3 segment in an IP network is called a subnetwork, formed by all nodes sharing the same network prefix as defined by their IP addresses and the network mask. Communication between layer-3 subnets requires a router. Hosts on a subnet communicate directly using the layer-2 segment that connects them. Most often, a subnetwork corresponds exactly with the underlying layer-2 segment, but it is also possible to run multiple subnets on a single layer-2 segment. ==References==",
  "categories": [
    "106762838",
    "20470056",
    "22935437",
    "23603337",
    "26220375",
    "43604620",
    "68328988"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1369531249",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1786799724.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001369531249",
    "type": "webpage",
    "title": "Network segment",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/network-segment",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          19
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          19
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001369531249",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1369531249",
    "note": "Immutable snapshot enwiki-001369531249"
  }
}