---
title: Network segment
slug: network-segment
qid: 
snapshot: enwiki-001369531249
content_hash: 
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1369531249
tags: [106762838, 20470056, 22935437, 23603337, 26220375, 43604620, 68328988]
---

# Network segment

> [!note] Provenance
> Snapshot `enwiki-001369531249` · content root `…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1369531249> · Licensed CC BY-SA 4.0

A network segment is a portion of a computer network. The nature and extent of a segment depends on the nature of the network and the device or devices used to interconnect end stations.

A network segment is a portion of a computer network. The nature and extent of a segment depends on the nature of the network and the device or devices used to interconnect end stations. ==Ethernet== According to the defining IEEE 802.3 standards for Ethernet, a network segment is an electrical connection between networked devices using a shared medium. In the original 10BASE5 and 10BASE2 Ethernet varieties, a segment would therefore correspond to a single coax cable and all devices tapped into it. At this point in the evolution of Ethernet, multiple network segments could be connected with repeaters (in accordance with the 5-4-3 rule for 10 Mbit/s Ethernet) to form a larger collision domain. With twisted-pair Ethernet, electrical segments can be joined using repeaters or repeater hubs, as can other varieties of Ethernet. This corresponds to the extent of an OSI layer 1 network and is equivalent to the collision domain. The 5-4-3 rule applies to this collision domain. Using switches or bridges, multiple layer-1 segments can be combined to a common layer-2 segment, i.e. all nodes can communicate with each other through MAC addressing or broadcasts. A layer-2 segment is equivalent to a broadcast domain. Traffic within a layer-2 segment can be separated into virtually distinct partitions by using VLANs. Each VLAN forms its own logical layer-2 segment. ==IP== A layer-3 segment in an IP network is called a subnetwork, formed by all nodes sharing the same network prefix as defined by their IP addresses and the network mask. Communication between layer-3 subnets requires a router. Hosts on a subnet communicate directly using the layer-2 segment that connects them. Most often, a subnetwork corresponds exactly with the underlying layer-2 segment, but it is also possible to run multiple subnets on a single layer-2 segment. ==References==
