Network synthesis

Uses your system voice; voice and rate in settings.

Snapshot

≈ 12 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Network synthesis is a design technique for linear electrical circuits. Synthesis starts from a prescribed impedance function of frequency or frequency response and then determines the possible networks that will produce the required response. The technique is to be compared to network analysis in which the response (or other behaviour) of a given circuit is calculated. Prior to network synthesis, only network analysis was available, but this requires that one already knows what form of circuit is to be analysed. There is no guarantee that the chosen circuit will be the closest possible match to the desired response, nor that the circuit is the simplest possible. Network synthesis directly addresses both these issues. Network synthesis has historically been concerned with synthesising passive networks, but is not limited to such circuits. The field was founded by Wilhelm Cauer after reading Ronald M. Foster's 1924 paper A reactance theorem. Foster's theorem provided a method of synthesising LC circuits with arbitrary number of elements by a partial fraction expansion of the impedance function. Cauer extended Foster's method to RC and RL circuits, found new synthesis methods, and methods that could synthesise a general RLC circuit. Other important advances before World War II are due to Otto Brune and Sidney Darlington.…

Network synthesis is a design technique for linear electrical circuits. Synthesis starts from a prescribed impedance function of frequency or frequency response and then determines the possible networks that will produce the required response. The technique is to be compared to network analysis in which the response (or other behaviour) of a given circuit is calculated. Prior to network synthesis, only network analysis was available, but this requires that one already knows what form of circuit is to be analysed. There is no guarantee that the chosen circuit will be the closest possible match to the desired response, nor that the circuit is the simplest possible. Network synthesis directly addresses both these issues. Network synthesis has historically been concerned with synthesising passive networks, but is not limited to such circuits. The field was founded by Wilhelm Cauer after reading Ronald M. Foster's 1924 paper A reactance theorem. Foster's theorem provided a method of synthesising LC circuits with arbitrary number of elements by a partial fraction expansion of the impedance function. Cauer extended Foster's method to RC and RL circuits, found new synthesis methods, and methods that could synthesise a general RLC circuit. Other important advances before World War II are due to Otto Brune and Sidney Darlington. In the 1940s Raoul Bott and Richard Duffin published a synthesis technique that did not require transformers in the general case (the elimination of which had been troubling researchers for some time). In the 1950s, a great deal of effort was put into the question of minimising the number of elements required in a synthesis, but with only limited success. Little was done in the field until the 2000s when the issue of minimisation again became an active area of research, but as of 2023, is still an unsolved problem. A primary application of network synthesis is the design of network synthesis filters but this is not its only application. Amongst others are impedance matching networks, time-delay networks, directional couplers, and equalisation. In the 2000s, network synthesis began to be applied to mechanical systems as well as electrical, notably in Formula One racing. Foster's synthesis, in its original form, can be applied only to LC networks. A PRF represents a two-element-kind LC network if the critical frequencies of Z(s) all exist on the i \omega axis of the complex plane of s = \sigma + i \omega (the s-plane) and will alternate between poles and zeroes. There must be a single critical frequency at the origin and at infinity, all the rest must be in conjugate pairs. Z(s) must be the ratio of an even and odd polynomial and their degrees must differ by exactly one. These requirements are a consequence of Foster's reactance theorem. Z(s) = \frac {9s^5 + 30s^3 + 24s}{18s^4 + 36s^2 + 8} can be expanded into partial fractions as, Z(s) = {s \over 2} + \frac {(25 + 11 \sqrt 5)s}{5(9 + 3 \sqrt 5)s^2 +20} + \frac {(25 - 11 \sqrt 5)s}{5(9 - 3 \sqrt 5)s^2 +20} \approx {s \over 2} + \frac {2.48s}{3.93s^2 +1} + \frac {0.020s}{0.573s^2 + 1} The first term represents a series inductor, a consequence of Z(s) having a pole at infinity. If it had had a pole at the origin, that would represent a series capacitor. The remaining two terms each represent conjugate pairs of poles on the i \omega axis. Each of these terms can be synthesised as a parallel LC circuit by comparison with the impedance expression for such a circuit, Z_{LC}(s) = \frac {Ls}{LCs^2 + 1} The resulting circuit is shown in the figure. Y(s) = {1 \over Z(s)} = \frac {18s^4 + 36s^2 + 8}{9s^5 + 30s^3 + 24s} Expanded in partial fractions, Y(s) \simeq {1 \over 3s} + \frac {2.498s}{0.6346s^2 +1} + \frac {1.415s}{0.4719s^2 + 1} The first term represents a shunt inductor, a consequence of Y(s) having a pole at the origin (or, equivalently, Z(s) has a zero at the origin). If it had had a pole at infinity, that would represent a shunt capacitor. The remaining two terms each represent conjugate pairs of poles on the i \omega axis. Each of these terms can be synthesised as a series LC circuit by comparison with the admittance expression for such a circuit, Y_{LC}(s) = \frac {Cs}{LCs^2 + 1} The resulting circuit is shown in the figure. Z_{RC}(s) = \frac {R}{RCs + 1} Other forms and element kinds follow by analogy. As with an LC network, The PRF can be tested to see if it is an RC or RL network by examining the critical frequencies. The critical frequencies must all be on the negative real axis and alternate between poles and zeroes, and there must be an equal number of each. If the critical frequency nearest, or at, the origin is a pole, then the PRF is an RC network if it represents a Z(s) , or it is an RL network if it represents a Y(s) . Vice versa if the critical frequency nearest, or at, the origin is a zero. These extensions of the theory also apply to the Cauer forms described below. Z(s) = 0.5s + \cfrac{1}{1.5s+\cfrac{1}{2s+\cfrac{1}{1.5s+\cfrac{1}{0.5s}}}} or, in more compact notation, Z(s) = [0.5s;1.5s,2s,1.5s,0.5s]. The terms of this expansion can be directly implemented as the component values of a ladder network as shown in the figure. The given PRF may have a denominator that has a greater degree than the numerator. In such cases, the multiplicative inverse of the function is expanded instead. That is, if the function represents Z(s) , then Y(s) is expanded instead and vice versa. a pair of poles at s= \pm i \omega_c represents a parallel LC circuit of resonant frequency \omega_c in series a pair of zeroes at s= \pm i \omega_c represents a series LC circuit of resonant frequency \omega_c in shunt After these extractions, the remainder PRF has no critical frequencies on the imaginary axis and is known as a minimum reactance, minimum susceptance function. Brune synthesis proper begins with such a function. Z(s) = \frac {3s^2 + 3s + 6}{2s^2 + s + 2} has \omega_ \text {min} = \sqrt 2 and R_ \text {min} = 1 . The minimum function, Z_1(s) , is therefore, Z_1(s) = Z(s) - R_ \text {min} = \frac {s^2 + 2s + 4}{2s^2 + s + 2} Z_1(i \omega_0) = iX \ . For the example function, Z_1(i \omega_0) = -i \sqrt 2 = iX \ . In this case, X is negative, and we interpret it as the reactance of a negative-valued inductor, L_1 . Thus, iX = i \omega_0 L_1 and L_1 = -1 after substituting in the values of \omega_0 and iX . This inductance is then extracted from Z_1(s) , leaving another PRF, Z_2(s) , Z_2(s) = Z_1(s) - sL_1 = \frac {2s^3 + 2s^2 + 4s +4}{2s^2 + s +2} \ . The reason for extracting a negative value is because - sL_1 is a PRF, which it would not be if L_1 were positive. This guarantees that Z_2(s) will also be PRF (because the sum of two PRFs is also PRF). For cases where X is a positive value, the admittance function is used instead and a negative capacitance is extracted. How these negative values are implemented is explained in a later section. Z_2(s) = \frac {2s^3 + 2s^2 + 4s +4}{2s^2 + s +2} = \frac {(s^2 + 2)(2s + 2)}{2s^2 + s + 2} \ . Since such a pair of zeroes represents a shunt resonant circuit, we extract it as a pair of poles from the admittance function, \begin{align} Y_2(s) & = {1 \over Z_2(s)} = \frac {2s^2 + s + 2}{(s^2 + 2)(2s + 2)} \\ & = {1 \over {2s +2}} + \frac {s/2}{s^2 + 2} \\ & = Y_3(s) + \frac {s/2}{s^2 + 2} \\ \end{align} The rightmost term is the extracted resonant circuit with L_2 = 2 and C_2 = 1/4 . The network synthesised so far is shown in the figure. Z_3 (s) = {1 \over Y_3 (s)} = 2s + 2 = Z_4 (s) + 2s. Thus L_3 = 2 as shown in the figure. R(s) = \frac {kZ(s)-sZ(k)}{kZ(k)-sZ(s)} if Z(s) is a PRF then R(s) is a PRF for all real, positive values of k . Making Z(s) the subject of the expression results in, Z(s) = \left ( \frac {R(s)}{Z(k)} + \frac {k}{sZ(k)} \right )^{-1} + \left ( \frac {1}{Z(k)R(s)} + \frac {s}{kZ(k)} \right )^{-1} An example of one cycle of Bott-Duffin synthesis is shown in the figures. The four terms in this expression are, respectively, a PRF ( Z_2 (s) in the diagram), an inductance, L , in parallel with it, another PRF ( Z_1 (s) in the diagram), and a capacitance, C , in parallel with it. A pair of critical frequencies on the i \omega axis is then extracted from each of the two new PRFs (details not given here) each realised as a resonant circuit. The two residual PRFs ( Y_3 (s) and Z_4 (s) in the diagram) are each two degrees lower than Z(s) . The same procedure is then repeatedly applied to the new PRFs generated until just a single element remains. Since the number of PRFs generated doubles with each cycle, the number of elements synthesised will grow exponentially. Although the Bott-Duffin method avoids the use of transformers and can be applied to any expression capable of realisation as a passive network, it has limited practical use due to the high component count required. Darlington, Sidney "A history of network synthesis and filter theory for circuits composed of resistors, inductors, and capacitors", IEEE Transactions: Circuits and Systems, vol. 31, pp. 3–13, 1984. Ghosh, S.P., Chakroborty, A.K., Network Analysis and Synthesis, Tata McGraw Hill, 2010 . Glisson, Tildon H., Introduction to Circuit Analysis and Design, Springer, 2011 ISBN . Houpis, Constantine H.; Lubelfeld, Jerzy, Pulse Circuits, Simon and Schuster, 1970 . Hubbard, John H., "The Bott-Duffin synthesis of electrical circuits", pp. 33–40 in, Kotiuga, P. Robert (ed), A Celebration of the Mathematical Legacy of Raoul Bott, American Mathematical Society, 2010 . Hughes, Timothy H.; Morelli, Alessandro; Smith, Malcolm C., "Electrical network synthesis: A survey of recent work" , pp. 281–293 in, Tempo, R.; Yurkovich, S.; Misra, P. (eds), Emerging Applications of Control and Systems Theory, Springer, 2018 . Kalman, Rudolf, "Old and new directions of research in systems theory", pp. 3–13 in, Willems, Jan; Hara, Shinji; Ohta, Yoshito; Fujioka, Hisaya (eds), Perspectives in Mathematical System Theory, Control, and Signal Processing, Springer, 2010 . Lee, Thomas H., Planar Microwave Engineering, Cambridge University Press, 2004 . Matthaei, George L.; Young, Leo; Jones, E.M.T., Microwave Filters, Impedance-Matching Networks, and Coupling Structures, McGraw-Hill 1964 . Paarmann, Larry D., Design and Analysis of Analog Filters, Springer Science & Business Media, 2001 . Robertson, Ean; Somjit, Nutapong; Chongcheawchamnan Mitchai, Microwave and Millimetre-Wave Design for Wireless Communications, John Wiley & Sons, 2016 . Shenoi, Belle A., Magnitude and Delay Approximation of 1-D and 2-D Digital Filters, Springer, 2012 . Sisodia, M.L.; Gupta, Vijay Laxmi, Microwaves : Introduction To Circuits, Devices And Antennas, New Age International, 2007 . Storer, James Edward, Passive Network Synthesis, McGraw-Hill, 1957 . Swanson, David C., Signal Processing for Intelligent Sensor Systems with MATLAB, CRC Press, 2012 . Vaisband, Inna P.; Jakushokas, Renatas, Popovich, Mikhail; Mezhiba, Andrey V.; Köse, Selçuk; Friedman Eby G., On-Chip Power Delivery and Management, Springer, 2016 . Wanhammar, Lars, Analog Filters using MATLAB, Springer, 2009 . Youla, Dante C., Theory and Synthesis of Linear Passive Time-Invariant Networks, Cambridge University Press, 2015 . Wing, Omar, Classical Circuit Theory, Springer, 2008 .

Text derived from https://en.wikipedia.org/w/index.php?oldid=1340597879 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.