Neutron moderator
In nuclear engineering, a neutron moderator is a medium that reduces the speed of fast neutrons, ideally without capturing any, leaving them as thermal neutrons with only minimal (thermal) kinetic energy.
≈ 6 min read
Neutron moderator. encyclopegia.org, snapshot enwiki-001332201150. /a/neutron-moderator
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In nuclear engineering, a neutron moderator is a medium that reduces the speed of fast neutrons, ideally without capturing any, leaving them as thermal neutrons with only minimal (thermal) kinetic energy. These thermal neutrons are immensely more susceptible than fast neutrons to propagate a nuclear chain reaction of uranium-235 or other fissile isotope by colliding with their atomic nucleus.
Water (sometimes called "light water" in this context) is the most commonly used moderator (roughly 75% of the world's reactors). Solid graphite (20% of reactors) and heavy water (5% of reactors) are the main alternatives.
Beryllium has also been used in some experimental types, and hydrocarbons have been suggested as another possibility. \bar{E}=\frac{1}{2}m_\text{n} \langle v^2 \rangle=\frac{3}{2}k_\text{B} T , where m_\text{n} is the neutron mass, \langle v^2 \rangle is the average squared neutron speed, and k_\text{B} is the Boltzmann constant. The characteristic neutron temperature of several-MeV neutrons is several tens of billions kelvin.
Moderation is the process of the reduction of the initial high speed (high kinetic energy) of the free neutron. Since energy is conserved, this reduction of the neutron speed takes place by transfer of energy to a material called a moderator. The probability of scattering of a neutron from a nucleus is given by the scattering cross section.
The first few collisions with the moderator may be of sufficiently high energy to excite the nucleus of the moderator. Such a collision is inelastic, since some of the kinetic energy is transformed to potential energy by exciting some of the internal degrees of freedom of the nucleus to form an excited state.
As the energy of the neutron is lowered, the collisions become predominantly elastic, i.e., the total kinetic energy and momentum of the system (that of the neutron and the nucleus) is conserved. Given the mathematics of elastic collisions, as neutrons are very light compared to most nuclei, the most efficient way of removing kinetic energy from the neutron is by choosing a moderating nucleus that has near identical mass.
A collision of a neutron which has mass of 1 with a 1 H nucleus (a proton) could result in the neutron losing virtually all of its energy in a single head-on collision. More generally, it is necessary to take into account both glancing and head-on collisions.
The mean logarithmic reduction of neutron energy per collision, \xi , depends only on the atomic mass, A , of the nucleus and is given by: \xi= \ln\frac{E_0}{E}=1-\frac{(A-1)^2}{2A}\ln\left(\frac{A+1}{A-1}\right) . This can be reasonably approximated to the very simple form \xi\simeq \frac{2}{A+2/3} .
From this one can deduce n , the expected number of collisions of the neutron with nuclei of a given type that is required to reduce the kinetic energy of a neutron from E_0 to E_1 n=\frac{1}{\xi}(\ln E_0-\ln E_1) . and there is no absorption, the velocity distributions of both particles types would be well-described by a single Maxwell–Boltzmann distribution.
Reactor moderators
In a thermal-neutron reactor, the nucleus of a heavy fuel element such as uranium absorbs a slow-moving free neutron, becomes unstable, and then splits into two smaller atoms (fission products). The fission process for 235 U nuclei yields two fission products, two to three fast-moving free neutrons, plus an amount of energy primarily manifested in the kinetic energy of the recoiling fission products.
The free neutrons are emitted with a kinetic energy of ~2 MeV each. Because more free neutrons are released from a uranium fission event than the number of thermal neutrons which are required to initiate the event, the reaction can become a self-sustaining nuclear chain reaction under controlled conditions, thus liberating a tremendous amount of energy. , measured in barns (a unit equal to 10 −28 m 2 ), is a function of the energy (so-called excitation function) of the neutron colliding with a 235 U nucleus.
Fission probability decreases as neutron energy (and speed) increases. This explains why most reactors fueled with 235 U need a moderator to sustain a chain reaction and why removing a moderator can shut down a reactor. The probability of further fission events is determined by the fission cross section, which is dependent upon the speed (energy) of the incident neutrons.
For thermal reactors, high-energy neutrons in the MeV-range are much less likely (though not unable) to cause further fission. The newly released fast neutrons, moving at roughly 10% of the speed of light, must be slowed down or "moderated", typically to speeds of a few kilometres per second, if they are to be likely to cause further fission in neighbouring 235 U nuclei and hence continue the chain reaction.
This speed occurs at temperatures in the few hundred Celsius range. In all moderated reactors, some neutrons of all energy levels will produce fission, including fast neutrons.
Some reactors are more fully thermalised than others; for example, in a CANDU reactor nearly all fission reactions are produced by thermal neutrons, while in a pressurized water reactor (PWR) a considerable portion of the fissions are produced by higher-energy neutrons. In the proposed water-cooled supercritical water reactor, the proportion of fast fissions may exceed 50%, making it technically a fast-neutron reactor.
A fast reactor uses no moderator but relies on fission produced by unmoderated fast neutrons to sustain the chain reaction. In some fast reactor designs, up to 20% of fissions can come from direct fast neutron fission of uranium-238, an isotope which is not fissile at all with thermal neutrons.
Moderators are also used in non-reactor neutron sources, such as plutonium-beryllium (using the (α,n) reaction) and spallation sources (using (p,xn) reactions with neutron rich heavy elements as targets).
Impurities
Good moderators are free of neutron-absorbing impurities such as boron. In commercial nuclear power plants the moderator typically contains dissolved boron. The boron concentration of the reactor coolant can be changed by the operators by adding boric acid or by diluting with water to manipulate reactor power.
The Nazi Nuclear Program suffered a substantial setback when its inexpensive graphite moderators failed to function. At that time, most graphites were deposited onto boron electrodes, and the German commercial graphite contained too much boron. Since the war-time German program never discovered this problem, they were forced to use far more expensive heavy water moderators.
This problem was discovered by physicist Leó Szilárd.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1332201150 under CC BY-SA 4.0; modifications have been made.