NFC-WI

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

NFC-WI is NFC wired interface having 2 wires SIGIN (signal-in) and SIGOUT (signal-out). It is also called S2C (SignalIn/SignalOut Connection) interface. In 2006, ECMA standardized the NFC wired interface with specification ECMA-373 (ECMA, 2006). It has three modes of operation: off, wired and virtual mode. In off mode, there is no communication with the SE. In wired mode, the SE is visible to the internal NFC controller. In virtual mode, the SE is visible to external RF readers. These modes are naturally mutually exclusive.

NFC-WI is NFC wired interface having 2 wires SIGIN (signal-in) and SIGOUT (signal-out). It is also called S2C (SignalIn/SignalOut Connection) interface. In 2006, ECMA standardized the NFC wired interface with specification ECMA-373 (ECMA, 2006). It has three modes of operation: off, wired and virtual mode. In off mode, there is no communication with the SE. In wired mode, the SE is visible to the internal NFC controller. In virtual mode, the SE is visible to external RF readers. These modes are naturally mutually exclusive.

See also

Single Wire Protocol Near field communication

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1254018431 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.