Lesson plan
Nibbler
A nibbler (or pair of nibblers ) is a tool for cutting sheet metal with minimal distortion. It may be used for "nibbling": cutting a contour by producing a series of overlapping slits or notches. One type of nibbler operates much like a punch and die, with a blade that moves in a linear fashion against a fixed die, removing small bits of metal and leaving a kerf approximately wide. Another type operates similar to tin snips, but shears the sheet along two parallel tracks apart, rolling up the waste in a tight spiral as it cuts. Nibblers may be manual (hand operated) or powered. Power nibblers are often powered by compressed air, though electrical types also exist. A common DIY nibbler tool is an electric drill attachment, which converts the rotary motion of the drill into a reciprocating motion of the jaw. File:nibblerdetail1.jpg|Detail of cutting bit of manual nibbler, punch-and-die type File:nibbler2.jpg|Shear-type nibbler and detail of cutting head
Article summary
A nibbler (or pair of nibblers ) is a tool for cutting sheet metal with minimal distortion. It may be used for "nibbling": cutting a contour by producing a series of overlapping slits or notches. One type of nibbler operates much like a punch and die, with a blade that moves in a linear fashion against a fixed die, removing small bits of metal and leaving a kerf approximately wide. Another type operates similar to tin snips, but shears the sheet along two parallel tracks apart, rolling up the waste in a tight spiral as it cuts. Nibblers may be manual (hand operated) or powered. Power nibblers are often powered by compressed air, though electrical types also exist. A common DIY nibbler tool is an electric drill attachment, which converts the rotary motion of the drill into a reciprocating motion of the jaw. File:nibblerdetail1.jpg|Detail of cutting bit of manual nibbler, punch-and-die type File:nibbler2.jpg|Shear-type nibbler and detail of cutting head
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.