Lesson plan
Nisil
Nisil is an alloy of nickel (95.5% wt.) and silicon (4.4% wt.) with traces of Mg (0.1% wt.), which is non-magnetic. Nisil melts at 1341 - 1420 °C, has a density of 8.58 g/cm 3 , and electrical resistivity of 0.365 Ω⋅mm 2 /m at 20 °C. It is often used in conjunction with Nicrosil in type N thermocouples. In this use, it serves as the negative leg of the thermocouple. It offers higher thermoelectric stability in air above 1000°C (1830°F) and better oxidation resistance than type E, J and K thermocouples. It can not be exposed to sulphur-containing gases.
Article summary
Nisil is an alloy of nickel (95.5% wt.) and silicon (4.4% wt.) with traces of Mg (0.1% wt.), which is non-magnetic. Nisil melts at 1341 - 1420 °C, has a density of 8.58 g/cm 3 , and electrical resistivity of 0.365 Ω⋅mm 2 /m at 20 °C. It is often used in conjunction with Nicrosil in type N thermocouples. In this use, it serves as the negative leg of the thermocouple. It offers higher thermoelectric stability in air above 1000°C (1830°F) and better oxidation resistance than type E, J and K thermocouples. It can not be exposed to sulphur-containing gases.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.