Lesson plan

Nivaflex

Nivaflex is an octavariant alloy important in watchmaking, used primarily for the mainspring. The name was registered as a trademark in 1957 by Reinhard Straumann, a Swiss metallurgist. Nivaflex is "wholly non-magnetic" and displays a very low coefficient of thermal expansion. Its composition is of 45% cobalt, 21% nickel, 18% chromium, 5% iron, 4% tungsten, 4% molybdenum, 1% titanium and 0.2% beryllium; carbon content is less than 0.1 percent of the alloy's weight.

Back to article

Article summary

Nivaflex is an octavariant alloy important in watchmaking, used primarily for the mainspring. The name was registered as a trademark in 1957 by Reinhard Straumann, a Swiss metallurgist. Nivaflex is "wholly non-magnetic" and displays a very low coefficient of thermal expansion. Its composition is of 45% cobalt, 21% nickel, 18% chromium, 5% iron, 4% tungsten, 4% molybdenum, 1% titanium and 0.2% beryllium; carbon content is less than 0.1 percent of the alloy's weight.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.