Noise pollution

Boeing 747-400 passes close to houses shortly before landing at London Heathrow Airport. is the main source of noise pollution in cities like São Paulo.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 19 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Boeing 747-400 passes close to houses shortly before landing at London Heathrow Airport. is the main source of noise pollution in cities like São Paulo. Noise pollution is sound with potential harmful effects on humans and animals. The main sources of outdoor noise worldwide are machines, transportation, and propagation systems.

Poor urban planning may give rise to noise pollution. Side-by-side industrial and residential zones can result in noise pollution in residential areas. Some of the main sources of noise in residential areas include loud music, transportation (traffic, rail, airplanes, etc.), lawn care maintenance, construction, electrical generators, wind turbines, explosions, and other human activity.

Documented problems associated with noise in urban environments go back as far as ancient Rome. Research suggests that noise pollution in the United States is the highest in low-income and racial minority neighborhoods, and noise pollution associated with household electricity generators is an emerging environmental degradation in many developing nations.

A national study of modeled transportation noise in the contiguous United States found that census tracts with higher proportions of Black, Hispanic, and Asian population and higher poverty had higher average noise levels than wealthier and mostly White areas.…

Boeing 747-400 passes close to houses shortly before landing at London Heathrow Airport. is the main source of noise pollution in cities like São Paulo. Noise pollution is sound with potential harmful effects on humans and animals. The main sources of outdoor noise worldwide are machines, transportation, and propagation systems.

Poor urban planning may give rise to noise pollution. Side-by-side industrial and residential zones can result in noise pollution in residential areas. Some of the main sources of noise in residential areas include loud music, transportation (traffic, rail, airplanes, etc.), lawn care maintenance, construction, electrical generators, wind turbines, explosions, and other human activity.

Documented problems associated with noise in urban environments go back as far as ancient Rome. Research suggests that noise pollution in the United States is the highest in low-income and racial minority neighborhoods, and noise pollution associated with household electricity generators is an emerging environmental degradation in many developing nations.

A national study of modeled transportation noise in the contiguous United States found that census tracts with higher proportions of Black, Hispanic, and Asian population and higher poverty had higher average noise levels than wealthier and mostly White areas. The study found that residential segregation and urban land use practices correlate with the high levels of traffic and aviation noise in many communities of color and low-income neighborhoods.

High noise levels can contribute to cardiovascular effects in humans and an increased incidence of coronary artery disease. In animals, noise can increase the risk of death by altering predator or prey detection and avoidance, interfere with reproduction and navigation, and contribute to permanent hearing loss.

Metrics of noise

Noise exposure is quantified in terms of sound pressure levels measured in decibels (dB), a logarithmic scale used to relate physical sound intensity to human perception. Everyday environmental sounds such as road traffic and construction typically range from about 70 to over 100 dB, and repeated exposure above approximately 85 dB is associated with an increased risk of hearing damage.

Metrics such as the equivalent continuous sound level (L_eq) and the day–night average sound level (L_dn) are commonly used in regulatory and public health contexts to describe long-term community noise exposure. Researchers measure noise in terms of pressure, intensity, and frequency.

Sound pressure level (SPL) represents the amount of pressure relative to atmospheric pressure during sound wave propagation that can vary with time; this is also known as the sum of the amplitudes of a wave. Sound intensity, measured in Watts per meters-squared, represents the flow of sound over a particular area.

Although sound pressure and intensity differ, both can describe the level of loudness by comparing the current state to the threshold of hearing; this results in decibel units on the logarithmic scale. The logarithmic scale accommodates the vast range of sound heard by the human ear.

Frequency, or pitch, is measured in hertz (Hz) and reflects the number of sound waves propagated through the air per second. Humans generally hear frequencies from 20 Hz to 20,000 Hz; however, sensitivity to hearing higher frequencies decreases with age.

Some organisms, such as elephants, can register frequencies between 0 and 20 Hz (infrasound), and others, such as bats, can recognize frequencies above 20,000 Hz (ultrasound) to echolocate. Researchers use different weights to account for noise frequency with intensity, as humans do not perceive sound at the same loudness level.

The most commonly used weighted levels are A-weighting, C-weighting, and Z-weighting. A-weighting mirrors the range of hearing, with frequencies of 20 Hz to 20,000 Hz. This gives more weight to higher frequencies and less weight to lower frequencies.

C-weighting has been used to measure peak sound pressure or impulse noise, similar to loud short-lived noises from machinery in occupational settings. Z-weighting, also known as zero-weighting, represents noise levels without any frequency weights. Understanding sound pressure levels is key to assessing measurements of noise pollution.

Several metrics describing noise exposure include: Energy average equivalent level of the A-weighted sound, LAeq: This measures the average sound energy over a given period for constant or continuous noise, such as road traffic. LAeq can be further broken up into different types of noise based on time of day; however, cutoffs for evening and nighttime hours may differ between countries, with the United States, Belgium, and New Zealand noting evening hours from 19:00–22:00 or 7:00 p.m.–10:00 p.m. and nighttime hours from 22:00–7:00 or 10:00 p.m.–7:00 a.m. and most European countries noting evening hours from 19:00–23:00 or 7:00 p.m.–11:00 p.m. and nighttime hours from 23:00–7:00 or 11:00 p.m.–7:00 a.m.). LAeq terms include: Day-night average level, DNL or LDN: This measurement assesses the cumulative exposure to sound for a 24-hour period (L eq over 24 hrs) of the year, with a 10 dB(A) penalty or weight added to nighttime noise measurements given the increased sensitivity to noise at night.

This is calculated from the following equation (United States, Belgium, New Zealand): L_{dn}=10\cdot\log_{10}\frac{1}{24}\left(15\cdot10^\frac{L_{day}}{10}+9\cdot10^\frac{L_{night}+10}{10}\right) Day-evening-night average level, DENL or Lden: This measurement, commonly used in European countries, assesses the 24-hour average in a year (similar to DNL); however, this measurement separates evening (4 hours, 19:00–23:00 or 7:00pm–11:00pm) from night hours (8 hours, 23:00–7:00 or 11:00 p.m.–7:00 a.m.) and adds a 5 dB penalty to evening and 10 dB penalty to nighttime hours. This is calculated from the following equation (most of Europe): L_{den}=10\cdot\log_{10}\frac{1}{24}\left (12\cdot10^\frac{L_{day}}{10}+4\cdot10^\frac{L_{evening}+5}{10}+8\cdot10^\frac{L_{night}+10}{10}\right) Daytime level, LAeqD, or Lday: This measurement assesses daytime noise, usually from 7:00–19:00 (7 a.m.–7 p.m.), yet may vary by country.

Nighttime level, LAeqN, or Lnight: This measurement assesses nighttime noise, depending on country cutoff hours discussed above. Maximum level, LAmax: This measurement represents the maximal noise level when examining point sources or single events of noise; however, this value does not factor in duration of the event.

Sound exposure level of A-weighted sound, SEL: This measurement represents the total energy for a particular event. SEL is used to describe discrete events in terms of A-weighted sound. The difference between SEL and LAmax is that SEL is derived using multiple time points of a particular event in calculating sound levels rather than the peak value.

Percentile-derived measurements (L10, L50, L90, etc.): Noise may be described in terms of its statistical distribution over a set time, in which investigators may obtain values, or cut-points, at any percentile level. The L90 is the sound level that exceeds 90% of the time period; this is commonly referred to as background noise.

Researchers with the US National Park Service found that human activity doubles the background-noise levels in 63 percent of protected spaces like national parks, and increases them tenfold in 21 percent. In the latter places, "if you could have heard something 100 feet away, now you can only hear it 10 feet away".

Instrumentation

is one of the main tools for measuring sounds in the environment and the workplace.

Sound level meters

Sound can be measured in the air using a sound level meter, a device consisting of a microphone, an amplifier, and a time meter. Sound level meters can measure noise at different frequencies (usually A- and C-weighted levels).

There are two settings for response time constants, fast (time constant = 0.125 seconds, similar to human hearing) or slow (1 second, used for calculating averages over widely varying sound levels). Sound level meters meet the required standards set by the International Electrotechnical Commission (IEC) and in the United States, the American National Standards Institute as type 0, 1, or 2 instruments.

Type 0 devices are not required to meet the same criteria expected of types 1 and 2 since scientists use these as laboratory reference standards. Type 1 (precision) instruments are to study the precision of capturing sound measurements, while type 2 instruments are for general field use.

Type 1 devices acceptable by the standards have a margin of error of ±1.5 dB, while type 2 instruments meet a margin of error of ±2.3 dB.

Dosimeters

Sound can also be measured using a noise dosimeter, a device similar to a sound level meter. Individuals have used dosimeters to measure personal exposure levels in occupational settings given their smaller, more portable size. Unlike many sound level meters, a dosimeter microphone attaches to the worker and monitors levels throughout a work shift. Additionally, dosimeters can calculate the percent dose or time-weighted average (TWA).

Smartphone applications

In recent years, scientists and audio engineers have been developing smartphone apps to conduct sound measurements, similar to the standalone sound level meters and dosimeters. In 2014, the National Institute for Occupational Safety and Health (NIOSH) within the Centers for Disease Control and Prevention (CDC) published a study examining the efficacy of 192 sound measurement apps on iOS and Android smartphones.

The authors found that only 10 apps, all of which were on the App Store, met all acceptability criteria. Of these 10 apps, only 4 apps met accuracy criteria within 2 dB(A) from the reference standard.

As a result of this study, they created the NIOSH Sound Level Meter App to increase accessibility and decrease costs of monitoring noise using crowdsourcing data with a tested and highly accurate application. The app is compliant with ANSI S1.4 and IEC 61672 requirements.

The app calculates the following measures: total run time, instantaneous sound level, A-weighted equivalent sound level (LAeq), maximum level (LAmax), C-weighted peak sound level, time-weighted average (TWA), dose, and projected dose. Dose and projected dose are based on sound level and duration of noise exposure in relation to the NIOSH recommended exposure limit of 85 dB(A) for an eight-hour work shift.

Using the phone's internal microphone (or an attached external microphone), the NIOSH Sound Level Meter measures instantaneous sound levels in real time and converts sound into electrical energy to calculate measurements in A-, C-, or Z-weighted decibels. App users are able to generate, save, and e-mail measurement reports.

The NIOSH Sound Level Meter is currently only available on Apple iOS devices.

Wildlife

Noise generated by traffic, ships, vehicles, and aircraft can affect the survivability of wildlife species and can reach undisturbed habitats. Although sounds are commonly present in the environment, anthropogenic noises are distinguishable due to differences in frequency and amplitude.

Many animals use sounds to communicate with others of their species, whether that is for reproduction purposes, navigation, or to notify others of prey or predators. However, anthropogenic noises inhibit species from detecting these sounds, affecting overall communication within the population.

Noise pollution can interfere with animal behavior such as communication, foraging, reproduction, navigation, predator avoidance, and parental care. Marine species such as cetaceans (whales and dolphins) rely on sound for echolocation and are particularly vulnerable to ship noise and sonar, which has been associated with strandings and disorientation among individuals.

Terrestrial wildlife, including birds and insects, may also experience disrupted breeding and increased stress responses under high ambient noise levels. Species such as birds, amphibians, reptiles, fishes, mammals, and invertebrates are examples of biological groups that are impacted by noise pollution.

If animals cannot communicate with one another, reproduction may decline (due to inability to find mates) and mortality may increase (due to inability to warn of a predator). The study of these relationships between acoustic organisms, the acoustic environment, and resulting impacts is known as soundscape ecology or acoustic ecology.

European robins living in urban environments are more likely to sing at night in places with high levels of noise pollution during the day, suggesting that they sing at night because it is quieter, and their message can propagate through the environment more clearly. The same study showed that daytime noise was a stronger predictor of nocturnal singing than night-time light pollution, to which the phenomenon often is attributed.

Anthropogenic noise reduced the species richness of birds found in Neotropical urban parks. Zebra finches become less faithful to their partners when exposed to traffic noise. This could alter a population's evolutionary trajectory by selecting traits, sapping resources normally devoted to other activities and thus leading to profound genetic and evolutionary consequences.

Why invertebrates are affected

Several reasons have been identified relating to hypersensitivity in invertebrates when exposed to anthropogenic noise. Invertebrates have evolved to pick up sound, and a large portion of their physiology is adapted for the purpose of detecting environmental vibrations. Antennae or hairs on the organism pick up particle motion.

Anthropogenic noise created in the marine environment, such as pile driving and shipping, are picked up through particle motion; these activities exemplify near-field stimuli. The ability to detect vibration through mechanosensory structures is most important in invertebrates and fish. Mammals, also, depend on pressure detector ears to perceive the noise around them.

Therefore, it is suggested that marine invertebrates are likely perceiving the effects of noise differently than marine mammals. It is reported that invertebrates can detect a large range of sounds, but noise sensitivity varies substantially between each species. Generally, however, invertebrates depend on frequencies under 10 kHz.

This is the frequency at which a great deal of ocean noise occurs. Therefore, not only does anthropogenic noise often mask invertebrate communication, but it also negatively impacts other biological system functions through noise-induced stress. Another one of the leading causes of noise effects in invertebrates is because sound is used in multiple behavioral contexts by many groups.

This includes regularly sound produced or perceived in the context of aggression or predator avoidance. Invertebrates also utilize sound to attract or locate mates, and often employ sound in the courtship process.

Stress recorded in physiological and behavioral responses

, Poland Many of the studies that were conducted on invertebrate exposure to noise found that a physiological or behavioral response was triggered. Most of the time, this related to stress, and provided concrete evidence that marine invertebrates detect and respond to noise. Some of the most informative studies in this category focus on hermit crabs.

In one study, it was found that the behavior of the hermit crab Pagurus bernhardus, when attempting to choose a shell, was modified when subjected to noise. Proper selection of hermit crab shells strongly contributes to their ability to survive. Shells offer protection against predators, high salinity and desiccation.

However, researchers determined that approach to shell, investigation of shell, and habitation of shell, occurred over a shorter time duration with anthropogenic noise as a factor. This indicated that assessment and decision-making processes of the hermit crab were both altered, even though hermit crabs are not known to evaluate shells using any auditory or mechanoreception mechanisms.

In another study that focused on Pagurus bernhardus and the blue mussel (Mytilus edulis), physical behaviors exhibited a stress response to noise. When the hermit crab and mussel were exposed to different types of noise, significant variation in the valve gape occurred in the blue mussel.

The hermit crab responded to the noise by lifting the shell off of the ground multiple times, then vacating the shell to examine it before returning inside. The results from the hermit crab trials were ambiguous with respect to causation; more studies must be conducted in order to determine whether the behavior of the hermit crab can be attributed to the noise produced.

Another study that demonstrates a stress response in invertebrates was conducted on the longfin inshore squid (Doryteuthis pealeii). The squid was exposed to sounds of construction known as pile driving, which impacts the sea bed directly and produces intense substrate-borne and water-borne vibrations. The squid reacted by jetting, inking, pattern change and other startle responses.

Since the responses recorded are similar to those identified when faced with a predator, it is implied that the squid initially viewed the sounds as a threat. However, it was also noted that the alarm responses decreased over a period of time, signifying that the squid had likely acclimated to the noise.

Regardless, it is apparent that stress occurred in the squid, and although further investigation has not been pursued, researchers suspect that other implications exist that may alter the squid's survival habits. An additional study examined the impact noise exposure had on the Indo-Pacific humpback dolphin (Sousa chinensis).

The dolphins were exposed to elevated noise levels due to construction in the Pearl River Estuary in China, specifically caused by the world's largest vibration hammer—the OCTA-KONG. The study suggested that while the dolphin's clicks were not affected, their whistles were because of susceptibility to auditory masking.

The noise from the OCTA-KONG was found to have been detectable by the dolphins up to 3.5 km away from the original source, and while the noise was not found to be life-threatening it was indicated that prolonged exposure to this noise could be responsible for auditory damage.

Impacts on development

Boat-noise has been shown to affect the embryonic development and fitness of the sea hare Stylocheilus striatus. Anthropogenic noise can alter conditions in the environment that have a negative effect on invertebrate survival. Although embryos can adapt to normal changes in their environment, evidence suggests they are not well adapted to endure the negative effects of noise pollution.

Studies have been conducted on the sea hare to determine the effects of boat noise on the early stages of life and the development of embryos. Researchers have studied sea hares from the lagoon of Moorea Island, French Polynesia. In the study, recordings of boat noise were made by using a hydrophone.

In addition, recordings of ambient noise were made that did not contain boat noise. In contrast to ambient noise playbacks, mollusks exposed to boat noise playbacks had a 21% reduction in embryonic development. Additionally, newly hatched larvae experienced an increased mortality rate of 22% when exposed to boat noise playbacks.

Impacts on ecosystem

Anthropogenic noise can have negative effects on invertebrates that aid in controlling environmental processes that are crucial to the ecosystem. There are a variety of natural underwater sounds produced by waves in coastal and shelf habitats, and biotic communication signals that do not negatively impact the ecosystem.

The changes in behavior of invertebrates vary depending on the type of anthropogenic noise and is similar to natural noisescapes. Experiments have examined the behavior and physiology of the clam (Ruditapes philippinarum), the decapod (Nephrops norvegicus), and the brittlestar (Amphiura filiformis) that are affected by sounds resembling shipping and building noises.

The three invertebrates in the experiment were exposed to continuous broadband noise and impulsive broadband noise. The anthropogenic noise impeded the bioirrigation and burying behavior of Nephrops norvegicus. In addition, the decapod exhibited a reduction in movement.

Ruditapes philippinarum experienced stress which caused a reduction in surface relocation. The anthropogenic noise caused the clams to close their valves and relocate to an area above the sediment-water interface. This response inhibits the clam from mixing the top layer of the sediment profile and hinders suspension feeding.

Sound causes Amphiura filiformis to experience changes in physiological processes which results in irregularity of bioturbation behavior. These invertebrates play an important role in transporting substances for benthic nutrient cycling. As a result, ecosystems are negatively impacted when species cannot perform natural behaviors in their environment.

Locations with shipping lanes, dredging, or commercial harbors are known as continuous broadband sound. Pile-driving, and construction are sources that exhibit impulsive broadband noise. The different types of broadband noise have different effects on the varying species of invertebrates and how they behave in their environment.

Another study found that the valve closures in the Pacific oyster Magallana gigas was a behavioral response to varying degrees of acoustic amplitude levels and noise frequencies. Oysters perceive near-field sound vibrations by utilizing statocysts. In addition, they have superficial receptors that detect variations in water pressure.

Sound pressure waves from shipping can be produced below 200 Hz. Pile driving generates noise between 20 and 1000 Hz. In addition, large explosions can create frequencies ranging from 10 to 200 Hz.

M. gigas can detect these noise sources because their sensory system can detect sound in the 10 to eq, 24 hrs ); WHO set the recommended limit to 70 dB(A).

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378346607 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

21 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.