Lesson plan

Nominal Pipe Size

Nominal Pipe Size (NPS) is a North American set of standard sizes for pipes used for high or low pressures and temperatures. "Nominal" refers to pipe in non-specific terms and identifies the diameter of the hole with a non-dimensional number (for example, "2-inch-nominal steel pipe" consists of many varieties of steel pipe with the only criterion being a outside diameter). Specific pipe is identified by pipe diameter and another non-dimensional number for wall thickness referred to as the Schedule (Sched. or Sch., for example, "2-inch-diameter pipe, Schedule 40"). NPS is often incorrectly called National Pipe Size, due to confusion with the American standard for pipe threads, "national pipe straight", which is also abbreviated as NPS. The European and international designation equivalent to NPS is DN ( /nominal diameter/ ), in which sizes are measured in metric units; see ISO 6708. The term NB, for nominal bore, is also frequently used interchangeably with DN.

Back to article

Article summary

Nominal Pipe Size (NPS) is a North American set of standard sizes for pipes used for high or low pressures and temperatures. "Nominal" refers to pipe in non-specific terms and identifies the diameter of the hole with a non-dimensional number (for example, "2-inch-nominal steel pipe" consists of many varieties of steel pipe with the only criterion being a outside diameter). Specific pipe is identified by pipe diameter and another non-dimensional number for wall thickness referred to as the Schedule (Sched. or Sch., for example, "2-inch-diameter pipe, Schedule 40"). NPS is often incorrectly called National Pipe Size, due to confusion with the American standard for pipe threads, "national pipe straight", which is also abbreviated as NPS. The European and international designation equivalent to NPS is DN ( /nominal diameter/ ), in which sizes are measured in metric units; see ISO 6708. The term NB, for nominal bore, is also frequently used interchangeably with DN.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.