Non-linear multi-dimensional signal processing

In signal processing, nonlinear multidimensional signal processing (NMSP) covers all signal processing using nonlinear multidimensional signals and systems.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In signal processing, nonlinear multidimensional signal processing (NMSP) covers all signal processing using nonlinear multidimensional signals and systems. Nonlinear multidimensional signal processing is a subset of signal processing (multidimensional signal processing).

Nonlinear multi-dimensional systems can be used in a broad range such as imaging, teletraffic, communications, hydrology, geology, and economics. Nonlinear systems cannot be treated as linear systems, using Fourier transformation and wavelet analysis. Nonlinear systems will have chaotic behavior, limit cycle, steady state, bifurcation, multi-stability and so on.

Nonlinear systems do not have a canonical representation, like impulse response for linear systems. But there are some efforts to characterize nonlinear systems, such as Volterra and Wiener series using polynomial integrals as the use of those methods naturally extend the signal into multi-dimensions.

Another example is the Empirical mode decomposition method using Hilbert transform instead of Fourier Transform for nonlinear multi-dimensional systems. This method is an empirical method and can be directly applied to data sets. Multi-dimensional nonlinear filters (MDNF) are also an important part of NMSP, MDNF are mainly used to filter noise in real data.…

In signal processing, nonlinear multidimensional signal processing (NMSP) covers all signal processing using nonlinear multidimensional signals and systems. Nonlinear multidimensional signal processing is a subset of signal processing (multidimensional signal processing).

Nonlinear multi-dimensional systems can be used in a broad range such as imaging, teletraffic, communications, hydrology, geology, and economics. Nonlinear systems cannot be treated as linear systems, using Fourier transformation and wavelet analysis. Nonlinear systems will have chaotic behavior, limit cycle, steady state, bifurcation, multi-stability and so on.

Nonlinear systems do not have a canonical representation, like impulse response for linear systems. But there are some efforts to characterize nonlinear systems, such as Volterra and Wiener series using polynomial integrals as the use of those methods naturally extend the signal into multi-dimensions.

Another example is the Empirical mode decomposition method using Hilbert transform instead of Fourier Transform for nonlinear multi-dimensional systems. This method is an empirical method and can be directly applied to data sets. Multi-dimensional nonlinear filters (MDNF) are also an important part of NMSP, MDNF are mainly used to filter noise in real data.

There are nonlinear-type hybrid filters used in color image processing, nonlinear edge-preserving filters use in magnetic resonance image restoration. Those filters use both temporal and spatial information and combine the maximum likelihood estimate with the spatial smoothing algorithm. y(t)=y_0+y_1(t)+y_2(t)+\cdots+y_n(t). Each component is defined as y_n(t)=\int_{-\infty}^{+\infty}\cdots\int_{-\infty}^{+\infty}h_n(\tau_1,\tau_2,\cdots,\tau_n)\displaystyle\prod_{i=1}^{n}x(t-\tau_i)d\tau_i , for n=1 , y_1(t) is the linear convolution. h_n(\tau_1,\tau_2,\cdots,\tau_n) is the generalized impulse response of order n . The 1D Fourier transform of y_n(t) is Y_{(n)}(\omega)=\int_{-\infin}^{+\infin}[\int_{-\infin}^{+\infin}\cdots\int_{-\infin}^{+\infin}h_n(\tau_1,\cdots,\tau_n)\prod_{i=1}^{n}x(t-\tau_i)d\tau_i]\exp(-j\omega t)dt.

Schetzen suggested the definition of n th output component as n time variables y_n(t_1,\cdots,t_n) so as to permit the application of the n -dimensional Fourier transform, Y_n(\omega_1,\cdots,\omega_n)=\int_{-\infin}^{+\infin}\cdots\int_{-\infin}^{+\infin}[\int_{-\infin}^{+\infin}\cdots\int_{-\infin}^{+\infin}h_n(\tau_1,\cdots,\tau_n)x(t-\tau_1)\cdots x(t-\tau_n)d\tau_1\cdots d\tau_n]\times\exp(-j\omega_1t_1\cdots-j\omega_nt_n)dt_1\cdots dt_n. Taking the inverse Fourier transform of Y_{(n)}(\omega) and Y_n(\omega_1,\cdots,\omega_n) and equalizing t_1=t_2=\cdots=t_n=t , we obtain the following equation, Y_{(n)}(\omega)=\int_{-\infin}^{+\infin}\cdots\int_{-\infin}^{+\infin}Y_n(\omega-\omega_2-\cdots-\omega_n,\omega_2,\cdots,\omega_n)d\omega_2d\omega_3\cdots d\omega_n. H_n(\omega_1,\cdots,\omega_n)=\int_{-\infty}^{+\infty}\cdots\int_{-\infty}^{+\infty}h_n(\tau_1,\cdots,\tau_n)\exp(-j\omega_1\tau_1-\cdots-j\omega_n\tau_n)d\tau_1\cdots d\tau_n \underline{y}(\textbf{x}_i)=\underline{y}_2(\textbf{x}_i)+\frac{\sum_{j=1}^{3}\beta_j\underline{y}_j(\textbf{x}_i)}{h+kD[\underline{y}_1(\textbf{x}_i),\underline{y}_3(\textbf{x}_i)]}, where D[\cdot] plays an important role as an edge sensing term, \beta=[\beta_1,\beta_2,\beta_3] characterizes the constant vector coefficient of the input sub-functions. h and k are some positive constants. The parameter k is used to control the amount of the nonlinear effect.

Let f(x,y) be sampled as f(m,n)=\left(\begin{array}{cccc} f_{1,1} & f_{2,1} & \cdots & f_{M,1}\\ f_{1,2} & f_{2,2} & \cdots & f_{M,2}\\ \cdots & \cdots & \cdots & \cdots\\ f_{1,n} & f_{2,N} & \cdots & f_{M,N} \end{array} \right), The EEMD decomposition of the m th column of f(m,n) is f(m,\sim)=\sum_{j=1}^{J}C_j(m,\sim)=\sum_{j=1}^{J}\left(\begin{array}{c} c_{m,1,j}\\ c_{m,2,j}\\ \cdots\\ c_{m,N,j}\\ \end{array}\right), after all the columns are decomposed we get j th matrix being g_j(m,n)=\left(\begin{array}{cccc} c_{1,1,j} & c_{2,1,j} & \cdots & c_{M,1,j}\\ c_{1,2,j} & c_{2,2,j} & \cdots & c_{M,2,j}\\ \cdots & \cdots & \cdots & \cdots\\ c_{1,N,j} & c_{2,N,j} & \cdots & c_{M,N,j}\\ \end{array}\right). This is the j^{th} component of the original data f(m,n) n^{th} row of g_j(m,n) decomposition using EEMD is g_j(\sim,n)=\sum_{k=1}^{K}D_{j,k}(\sim,n)=\sum_{k=1}^{K}\left(\begin{array}{cccc} d_{1,n,j,k}& d_{2,n,j,k}& \cdots& d_{M,n,j,k}\\ \end{array}\right), rearrange the component as h_{j,k}(m,n)=\left(\begin{array}{cccc} d_{1,1,j,k} & d_{2,1,j,k} & \cdots & d_{M,1,j,k}\\ d_{1,2,j,k} & d_{2,2,j,k} & \cdots & d_{M,2,j,k}\\ \cdots & \cdots & \cdots & \cdots\\ d_{1,N,j,k} & d_{2,1,N,k} & \cdots & d_{M,N,j,k}\\ \end{array}\right), So f(m,n)=\sum_{k=1}^{K}\sum_{j=1}^{J}h_{j,k}(m,n). For a multi-dimension decomposition with an n -dimensional function we can use the same method above.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1367491484 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001367491484 · captured 2026-08-03 · not yet sealed in the ledger · verify the chain · version history

Cite this page as: encyclopegia.org, “Non-linear multi-dimensional signal processing”, snapshot enwiki-001367491484. https://encyclopegia.org/a/non-linear-multi-dimensional-signal-processing

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.