Lesson plan
non-volatile random-access memory
and retain contents when system power is lost. Non-volatile random-access memory (NVRAM) is random-access memory that retains data without applied power. This is in contrast to dynamic random-access memory (DRAM) and static random-access memory (SRAM), which both maintain data only for as long as power is applied, or forms of sequential-access memory such as magnetic tape, which cannot be randomly accessed but which retains data indefinitely without electric power. Read-only memory devices can be used to store system firmware in embedded systems such as an automotive ignition system control or home appliance. They are also used to hold the initial processor instructions required to bootstrap a computer system. Read-write memory such as NVRAM can be used to store calibration constants, passwords, or setup information, and may be integrated into a microcontroller. If the main memory of a computer system were non-volatile, it would greatly reduce the time required to start a system after a power interruption. Current existing types of semiconductor non-volatile memory have limitations in speed (bandwidth and latency), bit density, power consumption, or operating life that make them impractical for main memory. Development is going on for the use of non-volatile memory chips as a system's main memory, as persistent memory.…
Article summary
and retain contents when system power is lost. Non-volatile random-access memory (NVRAM) is random-access memory that retains data without applied power. This is in contrast to dynamic random-access memory (DRAM) and static random-access memory (SRAM), which both maintain data only for as long as power is applied, or forms of sequential-access memory such as magnetic tape, which cannot be randomly accessed but which retains data indefinitely without electric power. Read-only memory devices can be used to store system firmware in embedded systems such as an automotive ignition system control or home appliance. They are also used to hold the initial processor instructions required to bootstrap a computer system. Read-write memory such as NVRAM can be used to store calibration constants, passwords, or setup information, and may be integrated into a microcontroller. If the main memory of a computer system were non-volatile, it would greatly reduce the time required to start a system after a power interruption. Current existing types of semiconductor non-volatile memory have limitations in speed (bandwidth and latency), bit density, power consumption, or operating life that make them impractical for main memory. Development is going on for the use of non-volatile memory chips as a system's main memory, as persistent memory.…
Key claims
- publication date: 2021 — source: Wikipedia, revision 1369974825, retrieved 2026-10-20 · confidence 0.95
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- The record states that the publication date is "2021". What evidence would count against this claim?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
- Wikipedia, “non-volatile random-access memory”, revision 1369974825, retrieved 2026-10-20 https://en.wikipedia.org/w/index.php?oldid=1369974825
Key claims and bibliography are generated from the same tracked claims and sources as the article page.