Nuclear weapon yield
≈ 11 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
comparing the yield (in kilotonnes) and mass (in kilograms) of various nuclear weapons developed by the United States. The explosive yield of a nuclear weapon is the amount of energy released such as blast, thermal, and nuclear radiation, when that particular nuclear weapon is detonated. It is usually expressed as a TNT equivalent, the standardized equivalent mass of trinitrotoluene (TNT) which would produce the same energy discharge if detonated, either in kilotonnes (symbol kt, thousands of tonnes of TNT) or in megatonnes (Mt, millions of tonnes of TNT). It is also sometimes expressed in terajoules (TJ); an explosive yield of one terajoule is equal to . Because the accuracy of any measurement of the energy released by TNT has always been problematic, the conventional definition is that one kilotonne of TNT is held simply to be equivalent to 10 12 calories. The yield-to-weight ratio is the amount of weapon yield compared to the mass of the weapon. The practical maximum yield-to-weight ratio for fusion weapons (thermonuclear weapons) has been estimated to six megatonnes of TNT per tonne of bomb mass (25 TJ/kg). Yields of 5.2 megatonnes/tonne and higher have been reported for large weapons constructed for single-warhead use in the early 1960s.…
comparing the yield (in kilotonnes) and mass (in kilograms) of various nuclear weapons developed by the United States.]] The explosive yield of a nuclear weapon is the amount of energy released such as blast, thermal, and nuclear radiation, when that particular nuclear weapon is detonated. It is usually expressed as a TNT equivalent, the standardized equivalent mass of trinitrotoluene (TNT) which would produce the same energy discharge if detonated, either in kilotonnes (symbol kt, thousands of tonnes of TNT) or in megatonnes (Mt, millions of tonnes of TNT). It is also sometimes expressed in terajoules (TJ); an explosive yield of one terajoule is equal to . Because the accuracy of any measurement of the energy released by TNT has always been problematic, the conventional definition is that one kilotonne of TNT is held simply to be equivalent to 10 12 calories. The yield-to-weight ratio is the amount of weapon yield compared to the mass of the weapon. The practical maximum yield-to-weight ratio for fusion weapons (thermonuclear weapons) has been estimated to six megatonnes of TNT per tonne of bomb mass (25 TJ/kg). Yields of 5.2 megatonnes/tonne and higher have been reported for large weapons constructed for single-warhead use in the early 1960s. Since then, the smaller warheads needed to achieve the increased net damage efficiency (bomb damage/bomb mass) of multiple warhead systems have resulted in increases in the yield/mass ratio for single modern warheads.
Examples of nuclear weapon yields
In order of increasing yield (most yield figures are approximate): , is , and not the 1.42 km displayed in the image. Similarly the maximum average fireball radius of a 21-kilotonne low altitude airburst, which is the modern estimate for the Fat Man, is , and not the 0.1 km of the image.]] In comparison, the blast yield of the GBU-43 Massive Ordnance Air Blast bomb is 0.011 kt, and that of the Oklahoma City bombing, using a truck-based fertilizer bomb, was 0.002 kt. The estimated strength of the explosion at the Port of Beirut is 0.3-0.5 kt. Most artificial non-nuclear explosions are considerably smaller than even what are considered to be very small nuclear weapons.
Milestone nuclear explosions
The following list is of milestone nuclear explosions. In addition to the atomic bombings of Hiroshima and Nagasaki, the first nuclear test of a given weapon type for a country is included, as well as tests that were otherwise notable (such as the largest test ever). All yields (explosive power) are given in their estimated energy equivalents in kilotons of TNT (see TNT equivalent). Putative tests (like Vela incident) have not been included. Note "Staged" refers to whether it was a "true" thermonuclear weapon of the so-called Teller–Ulam configuration or simply a form of a boosted fission weapon. For a more complete list of nuclear test series, see List of nuclear tests. Some exact yield estimates, such as that of the Tsar Bomba and the tests by India and Pakistan in 1998, are somewhat contested among specialists.
Calculating yields and controversy
Yields of nuclear explosions can be very hard to calculate, even using numbers as rough as in the kilotonne or megatonne range (much less down to the resolution of individual terajoules). Even under very controlled conditions, precise yields can be hard to determine, and for less controlled conditions the margins of error can be quite large. For fission devices, the most precise yield value is found from radiochemical fallout analysis; that is, measuring the quantity of fission products generated, in much the same way as the chemical yield can be measured after a chemical reaction from its reaction products. The radiochemical analysis method was pioneered by Herbert L. Anderson. For nuclear explosive devices where the fallout is not attainable or would be misleading, neutron activation analysis is often employed as the second most accurate method, with it having been used to determine the yield of both Little Boy and thermonuclear Ivy Mike's respective yields. Yields can also be inferred in a number of other remote sensing ways, including scaling law calculations based on blast size, infrasound, fireball brightness (Bhangmeter), seismographic data (CTBTO), and the strength of the shock wave. The surface area (A) and volume (V) of a sphere are A = 4\pi r^2 and V = \frac{4}{3} \pi r^3 respectively. The blast wave, however, was likely assumed to grow out as the surface area of the approximately hemispheric near surface burst blast wave of the Trinity gadget. The paper is moved 2.5 meters by the wave, so the effect of the Trinity device is to displace a hemispherical shell of air of volume 2.5 m × 2π(16 km) 2 . Multiply by 1 atm to get an energy of ~ 100 kT TNT. R = S\left(\frac{E t^2}{\rho}\right)^{\frac{1}{5}}. Here S is a dimensionless constant having a value approximately equal to 1, since it is low-order function of the heat capacity ratio or adiabatic index \gamma = \frac{C_P}{C_V}, which is approximately 1 for all conditions. Using the picture of the Trinity test shown here (which had been publicly released by the U.S. government and published in Life magazine), using successive frames of the explosion, Taylor found that R 5 /t 2 is a constant in a given nuclear blast (especially between 0.38 ms, after the shock wave has formed, and 1.93 ms, before significant energy is lost by thermal radiation). Furthermore, he estimated a value for S numerically at 1. Thus, with t = 0.025 s and the blast radius being 140 metres, and taking ρ to be 1 kg/m 3 (the measured value at Trinity on the day of the test, as opposed to sea-level values of approximately 1.3 kg/m 3 ) and solving for E, Taylor obtained that the yield was about 22 kilotonnes of TNT (90 TJ). This does not take into account the fact that the energy should only be about half this value for a hemispherical blast, but this very simple argument did agree to within 10% with the official value of the bomb's yield in 1950, which was (see G. I. Taylor, Proc. Roy. Soc. London A 200, pp. 235–247 (1950)). A good approximation to Taylor's constant S for \gamma below about 2 is S = \left(\frac{75(\gamma - 1)}{8\pi}\right)^{\frac{1}{5}}. The value of the heat capacity ratio here is between the 1.67 of fully dissociated air molecules and the lower value for very hot diatomic air (1.2), and under conditions of an atomic fireball is (coincidentally) close to the STP (standard) gamma for room-temperature air, which is 1.4. This gives the value of Taylor's S constant to be 1.036 for the adiabatic hypershock region where the constant R 5 /t 2 condition holds. As it relates to fundamental dimensional analysis, if one expresses all the variables in terms of mass M, length L, and time T: E = [M \cdot L^2 \cdot T^{-2}] (think of the expression for kinetic energy, E = mv^2/2 ), \rho = [M \cdot L^{-3}], t = [T], r = [L], and then derive an expression for, say, E, in terms of the other variables, by finding values of \alpha , \beta , and \gamma in the general relation E = \rho^\alpha \cdot t^\beta \cdot r^\gamma such that the left and right sides are dimensionally balanced in terms of M, L, and T (i.e., each dimension has the same exponent on both sides).
Other methods and controversy
Where these data are not available, as in a number of cases, precise yields have been in dispute, especially when they are tied to questions of politics. The weapons used in the atomic bombings of Hiroshima and Nagasaki, for example, were highly individual and very idiosyncratic designs, and gauging their yield retrospectively has been quite difficult. The Hiroshima bomb, "Little Boy", is estimated to have been between (a 20% margin of error), while the Nagasaki bomb, "Fat Man", is estimated to be between (a 10% margin of error). Such apparently small changes in values can be important when trying to use the data from these bombings as reflective of how other bombs would behave in combat, and also result in differing assessments of how many "Hiroshima bombs" other weapons are equivalent to (for example, the Ivy Mike hydrogen bomb was equivalent to either 867 or 578 Hiroshima weapons — a rhetorically quite substantial difference — depending on whether one uses the high or low figure for the calculation). Other disputed yields have included the massive Tsar Bomba, whose yield was claimed between being "only" or at a maximum of by differing political figures, either as a way for hyping the power of the bomb or as an attempt to undercut it.
See also
Effects of nuclear explosions — goes into detail about different effects at different yields List of nuclear weapons
References
External links
"What was the yield of the Hiroshima bomb?" (excerpt from official report) "General Principles of Nuclear Explosions", Chapter 1 in Samuel Glasstone and Phillip Dolan, eds., The Effects of Nuclear Weapons, 3rd edn. (Washington D.C.: U.S. Department of Defense/U.S. Energy Research and Development Administration, 1977); provides information about the relationship of nuclear yields to other effects (radiation, damage, etc.). "THE MAY 1998 POKHRAN TESTS: Scientific Aspects", discusses different methods used to determine the yields of the Indian 1998 tests. Discusses some of the controversy over the Indian test yields "What are the real yields of India's nuclear tests?" from Carey Sublette's NuclearWeaponArchive.org High-Yield Nuclear Detonation Effects Simulator
Text derived from https://en.wikipedia.org/w/index.php?oldid=1375067215 under CC BY-SA 4.0; modifications have been made.