Ogive
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
ogive of sharpness E = 120/100= 1.2 cartridge An ogive ( ) is the roundly tapered end of a two- or three-dimensional object. Ogive curves and surfaces are used in engineering, architecture, woodworking, and ballistics.
ogive of sharpness E = 120/100= 1.2 cartridge An ogive ( ) is the roundly tapered end of a two- or three-dimensional object. Ogive curves and surfaces are used in engineering, architecture, woodworking, and ballistics.
Etymology
The French Orientalist Georges Séraphin Colin gives as the term's origin the Arabic al-ġubb ( ) 'cistern', pronounced al-ġibb ( ) in vernacular Iberian Arabic, through the Spanish aljibe or archaically algibe. The earliest use of the word ogive is found in the 13th-century sketchbook of Villard de Honnecourt, from Picardy in northern France. The Oxford English Dictionary considers the French term's origin obscure; it might come from the Late Latin , the feminine perfect passive participle of , meaning the one who has met or encountered the other. However, Merriam-Webster's dictionary says it is from the "Middle English stone comprising an arch, from Middle French diagonal arch". According to Wiktionary, the French term comes "from Vulgar Latin augīvus, from Latin augēre, as the ogive goes on increasing, and the arch it forms increases the strength of the vault. In Old French we find the phrase arc ogif, itself from Latin arcus augivus. The word was also written as augive in the 17th century."
Types and use in applied physical science and engineering
In ballistics or aerodynamics, an ogive is a pointed, curved surface mainly used to form the approximately streamlined nose of a bullet or other projectile, reducing air resistance or the drag of air. The French word ogive can be translated as "nose cone" or "warhead". The traditional or secant ogive is a surface of revolution of the same curve that forms a Gothic arch; that is, a circular arc, of greater radius than the diameter of the cylindrical section ("shank"), is drawn from the edge of the shank until it intercepts the axis. If this arc is drawn so that it meets the shank at zero angle (that is, the distance of the centre of the arc from the axis, plus the radius of the shank, equals the radius of the arc), then it is called a tangent or spitzer ogive. This is a very common ogive for high velocity (supersonic) rifle bullets. The sharpness of this ogive is expressed by the ratio of its radius to the diameter of the cylinder; a value of one half being a hemispherical dome, and larger values being progressively more pointed. Values of 4 to 10 are commonly used in rifle bullets, with 6 being the most common. Another common ogive for bullets is the elliptical ogive. This is a curve very similar to the spitzer ogive, except that the circular arc is replaced by an ellipse defined in such a way that it meets the axis at exactly 90°. This gives a somewhat rounded nose regardless of the sharpness ratio. An elliptical ogive is normally described in terms of the ratio of the length of the ogive to the diameter of the shank. A ratio of one half would be, once again, a hemisphere. Values close to 1 are common in practice. Elliptical ogives are mainly used in pistol bullets. More complex ogives can be derived from minimum turbulence calculations rather than geometric forms, such as the von Kármán ogive used for supersonic missiles, aircraft and ordnance.
Architecture
at Worcester Cathedral UK One of the defining characteristics of Gothic architecture is the pointed arch.
Glaciology
In glaciology, the term ogives refers to alternating bands of light and dark coloured ice that occur as a result of glaciers moving through an icefall.
See also
Catenary arch Lancet window Nose cone design Ogee
References
Further reading
Verde, Tom, "The Point of the Arch", Aramco World, Volume 63, Number 3, 2012
Text derived from https://en.wikipedia.org/w/index.php?oldid=1357129664 under CC BY-SA 4.0; modifications have been made.