Lesson plan
Oldroyd-B model
The Oldroyd-B model is a constitutive model used to describe the flow of viscoelastic fluids. This model can be regarded as an extension of the upper-convected Maxwell model and is equivalent to a fluid filled with elastic bead and spring dumbbells. The model is named after its creator James G. Oldroyd. The model can be written as: \mathbf{T} + \lambda_1 \stackrel{\nabla}{\mathbf{T}} = 2\eta_0 (\mathbf{D} + \lambda_2 \stackrel{\nabla}{\mathbf{D}}) where: * \mathbf{T} is the deviatoric part of the stress tensor; * \lambda_1 is the relaxation time; * \lambda_2 is the retardation time = \frac{\eta_s}{\eta_0}\lambda_1 ; * \stackrel{\nabla}{\mathbf{T}} is the upper-convected time derivative of stress tensor: \stackrel{\nabla}{\mathbf{T}} = \frac{\partial}{\partial t} \mathbf{T} + \mathbf{v} \cdot \nabla \mathbf{T} -( (\nabla \mathbf{v})^T \cdot \mathbf{T} + \mathbf{T} \cdot (\nabla \mathbf{v})) ; * \mathbf{v} is the fluid velocity; * \eta_0 is the total viscosity composed of solvent and polymer components, \eta_0= \eta_s + \eta_p ; * \mathbf {D} is the deformation rate tensor or rate of strain tensor, \mathbf{D} = \frac{1}{2} \left[\boldsymbol\nabla \mathbf{v} + (\boldsymbol\nabla \mathbf{v})^T\right] .…
Article summary
The Oldroyd-B model is a constitutive model used to describe the flow of viscoelastic fluids. This model can be regarded as an extension of the upper-convected Maxwell model and is equivalent to a fluid filled with elastic bead and spring dumbbells. The model is named after its creator James G. Oldroyd. The model can be written as: \mathbf{T} + \lambda_1 \stackrel{\nabla}{\mathbf{T}} = 2\eta_0 (\mathbf{D} + \lambda_2 \stackrel{\nabla}{\mathbf{D}}) where: * \mathbf{T} is the deviatoric part of the stress tensor; * \lambda_1 is the relaxation time; * \lambda_2 is the retardation time = \frac{\eta_s}{\eta_0}\lambda_1 ; * \stackrel{\nabla}{\mathbf{T}} is the upper-convected time derivative of stress tensor: \stackrel{\nabla}{\mathbf{T}} = \frac{\partial}{\partial t} \mathbf{T} + \mathbf{v} \cdot \nabla \mathbf{T} -( (\nabla \mathbf{v})^T \cdot \mathbf{T} + \mathbf{T} \cdot (\nabla \mathbf{v})) ; * \mathbf{v} is the fluid velocity; * \eta_0 is the total viscosity composed of solvent and polymer components, \eta_0= \eta_s + \eta_p ; * \mathbf {D} is the deformation rate tensor or rate of strain tensor, \mathbf{D} = \frac{1}{2} \left[\boldsymbol\nabla \mathbf{v} + (\boldsymbol\nabla \mathbf{v})^T\right] .…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.