Optical disc

(CD-R), showing characteristic iridescence drive An optical disc is a flat, usually disc-shaped object that stores information in the form of physical variations on its surface that can be read with a beam of light.

Uses your system voice; voice and rate in settings.

≈ 17 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

(CD-R), showing characteristic iridescence drive An optical disc is a flat, usually disc-shaped object that stores information in the form of physical variations on its surface that can be read with a beam of light. Optical discs can be reflective, where the light source and detector are on the same side of the disc, or transmissive, where light shines through the disc to be detected on the other side.

They may contain analog or digital information, or a mixture of the two. Their main uses are the distribution of electronic media and data, and archival storage.

First-generation

At the start, optical discs were read-only media used to store broadcast-quality analog video, and later digital media such as music or computer software. The LaserDisc format stored analog video signals for the distribution of home video, but commercially lost to the VHS videocassette format, due mainly to its high cost and non-re-recordability; other first-generation disc formats were designed only to store digital data and were not initially capable of use as a digital video medium.

Most first-generation disc devices had an infrared laser reading head. The minimum size of the laser spot is proportional to the wavelength of the laser, so wavelength is a limiting factor upon the amount of information that can be stored in a given physical area on the disc.

The infrared range is beyond the long-wavelength end of the visible light spectrum, so it supports less density than shorter-wavelength visible light. One example of high-density data storage capacity, achieved with an infrared laser, is 700 MB of net user data for a 12 cm compact disc.

Other factors that affect data storage density include: the existence of multiple layers of data on the disc, the method of rotation (Constant linear velocity (CLV), Constant angular velocity (CAV), or zoned-CAV), the composition of lands and pits, and how much margin is unused is at the center and the edge of the disc. Sony and Philips developed the CD in the mid-1980s.

16-bit samples of the analog signal were taken at the rate of 44,100 samples per second. This sample rate was based on the Nyquist rate of 40,000 samples per second required to capture the audible frequency range to 20 kHz without aliasing, with an additional tolerance to allow the use of less-than-perfect analog anti-aliasing filters.

The standard allows up to 74 minutes of music or 650 MB of data storage. Types of Read-only Optical Discs: Compact disc (CD) and derivatives Audio CD Video CD (VCD) Super Video CD CD Video CD-Interactive LaserDisc GD-ROM Double Density Compact Disc (DDCD) MiniDisc (MD) MD Data Hi-MD

Laserdisc

In the Netherlands in 1969, Philips Research physicist, Pieter Kramer invented an optical videodisc in reflective mode with a protective layer read by a focused laser beam , filed 1972, issued 1991. Kramer's physical format is used in all optical discs.

In 1975, Philips and MCA began to work together, and in 1978, commercially much too late, they presented their long-awaited Laserdisc in Atlanta. MCA delivered the discs and Philips the players. However, the presentation was a commercial failure, and the cooperation ended.

In Japan and the U.S., Pioneer succeeded with the Laserdisc until the advent of the DVD. In 1979, Philips and Sony, in consortium, successfully developed the audio compact disc.

CD-ROM

The CD-ROM format was developed by Sony and Philips, introduced in 1984, as an extension of Compact Disc Digital Audio and adapted to hold any form of digital data. The same year, Sony demonstrated a LaserDisc data storage format, with a larger data capacity of 3.28 GB. Types of recordable Optical Discs Magneto-optical disc Phase-change Dual Write Once Read Many (WORM)

Magneto-optical drive

Magneto-optical discs are erasable media, they can be written and read many times; the media and drives were first introduced in late 1987 and early 1988 by Sharp, MCI, Sony and others, all using SCSI interface. Capacity ranged from 512 MB on 130 mm media to 160 Mb on 90 mm media. By 1998 there were more than 50 models offered by 12 vendors with media of 86 and 130 mm in diameter and offering capacities up to 2,600 MB, almost all using SCSI interface.

WORM drive

In 1979, Exxon STAR Systems in Pasadena, CA built a computer controlled WORM drive that utilized thin film coatings of Tellurium and Selenium on a 12" diameter glass disk. The recording system utilized blue light at 457 nm to record and red light at 632.8 nm to read.

STAR Systems was bought by Storage Technology Corporation (STC) in 1981 and moved to Boulder, CO. Development of the WORM technology was continued using 14" diameter aluminum substrates. Beta testing of the disk drives, originally labeled the Laser Storage Drive 20001 (LSD-2000), was only moderately successful.

Many of the disks were shipped to RCA Laboratories (now David Sarnoff Research Center) to be used in the Library of Congress archiving efforts. The STC disks utilized a sealed cartridge with an optical window for protection .

Second-generation

Second-generation optical discs were for storing great amounts of data, including broadcast-quality digital video. Such discs usually are read with a visible-light laser (usually red); the shorter wavelength and greater numerical aperture allow a narrower light beam, permitting smaller pits and lands in the disc.

In the DVD format, this allows 4.7 GB storage on a standard 12 cm, single-sided, single-layer disc; alternatively, smaller media, such as the DataPlay format, can have capacity comparable to that of the larger, standard compact 12 cm disc. DVD and derivatives DVD-Video DVD-Audio DualDisc Digital Video Express (DIVX) DVD-RAM DVD±R Hi-Vision LD Nintendo GameCube Game Disc (miniDVD derivative) Wii Optical Disc (DVD derivative) Super Audio CD (SACD) Enhanced Versatile Disc DataPlay Universal Media Disc (UMD) Ultra Density Optical

DVD-ROM

In 1995, a consortium of manufacturers (Sony, Philips, Toshiba, Panasonic) developed the second generation of the optical disc, the DVD. The DVD disc appeared after the CD-ROM had become widespread in society.

Third-generation

Third-generation optical discs are used for distributing high-definition video and videogames and support greater data storage capacities, accomplished with short-wavelength visible-light lasers and greater numerical apertures. Blu-ray Disc and HD DVD uses blue-violet lasers and focusing optics of greater aperture, for use with discs with smaller pits and lands, thereby greater data storage capacity per layer.

In practice, the effective multimedia presentation capacity is improved with enhanced video data compression codecs such as H.264/MPEG-4 AVC and VC-1. Blu-ray and derivatives (up to 400 GB - experimental ) BD-R and BD-RE High Fidelity Pure Audio AVCHD and AVCREC BDXL and Blu-ray 3D Ultra HD Blu-ray (4K Blu-ray) and 8K Blu-ray Wii U Optical Disc (25 GB per layer) HD DVD (discontinued disc format, up to 51 GB triple layer) CBHD (a derivative of the HD DVD format) HD VMD Professional Disc Announced but not released: Digital Multilayer Disk Fluorescent Multilayer Disc Forward Versatile Disc

Blu-ray and HD DVD

The third generation optical disc was developed in 2000–20061 and was introduced as Blu-ray Disc. First movies on Blu-ray Discs were released in June 2006. Blu-ray eventually prevailed in a high definition optical disc format war over a competing format, the HD DVD. A standard Blu-ray disc can hold about 25 GB of data, a DVD about 4.7 GB, and a CD about 700 MB.

Fourth-generation

The following formats go beyond the current third-generation discs and have the potential to hold more than one terabyte (1 TB) of data and at least some are meant for cold data storage in data centers: Ultra HD Blu-ray Archival Disc Optical Disc Archive Announced but abandoned: Holographic Versatile Disc Announced but not released: LS-R Protein-coated disc Stacked Volumetric Optical Disc 5D DVD 3D optical data storage (not a single technology, examples are Hyper CD-ROM and Fluorescent Multilayer Disc) In 20041, development of the Holographic Versatile Disc (HVD) commenced, which promised the storage of several terabytes of data per disc. However, development stagnated towards the late 2000s due to lack of funding.

In 2006, it was reported that Japanese researchers developed ultraviolet ray lasers with a wavelength of 210 nanometers, which would enable a higher bit density than Blu-ray discs. As of 2022, no updates on that project have been reported.

Recordable and writable optical discs

There are numerous formats of optical direct to disk recording devices on the market, all of which are based on using a laser to change the reflectivity of the digital recording medium in order to duplicate the effects of the pits and lands created when a commercial optical disc is pressed. Formats such as CD-R and DVD-R are write once read many or write-once, while CD-RW and DVD-RW are rewritable, more like a magnetic recording hard disk drive (HDD).

Media technologies vary, for example, M-DISC media uses a rock-like layer to retain data for longer than conventional recordable media. While being read-only compatible with existing DVD and Blu-ray drives, M-DISC media can only be written to using a stronger laser specifically made for this purpose, which is built into fewer optical drive models.

Surface error scanning

Optical media can predictively be scanned for errors and media deterioration well before any data becomes unreadable. Optical formats include some redundancy for error correction, which works until the amount of error exceeds a threshold.

A higher rate of errors may indicate deteriorating or low-quality media, physical damage, an unclean surface or media written using a defective optical drive. Precise error scanning requires access to the raw, uncorrected readout of a disc, which is not always provided by a drive. As a result, support of this functionality varies per optical drive manufacturer and model.

On ordinary drives without this functionality, it is possible to still look for unexpected reduction in read speed as an indirect, much less reliable measure. Optical media, such as CDs and DVDs, can be scanned to detect errors and signs of deterioration well before data becomes unreadable.

These formats include built-in error correction mechanisms, which function by adding redundant data. However, once the rate of errors surpasses the correction threshold, the media becomes vulnerable to failure. A high error rate can signal physical deterioration, low-quality manufacturing, surface contamination, or data recorded by a faulty optical drive.

Several specialized tools are available for performing error scans on optical media. Popular programs include Nero DiscSpeed, K-Probe, Opti Drive Control (previously known as CD Speed 2000), and DVD Info Pro for Windows. For cross-platform users, QPxTool is available to help monitor and maintain optical media integrity.

Each of these tools allows for detailed analysis of the error rates and conditions affecting optical discs.

Optical disc manufacturing

Optical discs are made using replication. This process can be used with all disc types. Recordable discs have pre-recorded vital information, like manufacturer, disc type, maximum read and write speeds, etc. In replication, a cleanroom with yellow light is necessary to protect the light-sensitive photoresist and to prevent dust from corrupting the data on the disc.

A glass master is used in replication. The master is placed in a machine that cleans it as much as possible using a rotating brush and deionized water, preparing it for the next step. In the next step, a surface analyzer inspects the cleanliness of the master before photoresist is applied on the master.

The photoresist is then baked in an oven to solidify it. Then, in the exposure process, the master is placed in a turntable where a laser selectively exposes the resist to light. At the same time, a developer and deionized water are applied to the disc to remove the exposed resist.

This process forms the pits and lands that represent the data on the disc. A thin coating of metal is then applied to the master, making a negative of the master with the pits and lands in it. The negative is then peeled off the master and coated in a thin layer of plastic.

The plastic protects the coating while a punching press punches a hole into the center of the disc, and punches excess material. The negative is now a stamper - a part of the mold that will be used for replication. It is placed on one side of the mold with the data side containing the pits and lands facing out.

This is done inside an injection molding machine. The machine then closes the mold and injects polycarbonate in the cavity formed by the walls of the mold, which forms or molds the disc with the data on it. The molten polycarbonate fills the pits or spaces between the lands on the negative, acquiring their shape when it solidifies.

This step is somewhat similar to record pressing. The polycarbonate disc cools quickly and is promptly removed from the machine, before forming another disc. The disc is then metallized, covered with a thin reflective layer of aluminum.

The aluminum fills the space once occupied by the negative. A layer of varnish is then applied to protect the aluminum coating and provide a surface suitable for printing. The varnish is applied near the center of the disc, and the disc is spun, evenly distributing the varnish on the surface of the disc.

The varnish is hardened using UV light. The discs are then silkscreened or a label is otherwise applied. Recordable discs add a dye layer, and rewritable discs add a phase change alloy layer instead, which is protected by upper and lower dielectric (electrically insulating) layers.

The layers may be sputtered. The additional layer is between the grooves and the reflective layer of the disc. Grooves are made in recordable discs in place of the traditional pits and lands found in replicated discs, and the two can be made in the same exposure process.

In DVDs, the same processes as in CDs are carried out, but in a thinner disc. The thinner disc is then bonded to a second, equally thin but blank, disc using UV-curable Liquid optically clear adhesive, forming a DVD disc. This leaves the data in the middle of the disc, which is necessary for DVDs to achieve their storage capacity.

In multi layer discs, semi reflective instead of reflective coatings are used for all layers except the last layer, which is the deepest one and uses a traditional reflective coating. Dual layer DVDs are made slightly differently.

After metallization (with a thinner metal layer to allow some light to pass through), base and pit transfer resins are applied and pre-cured in the center of the disc. Then the disc is pressed again using a different stamper, and the resins are completely cured using UV light before being separated from the stamper.

Then the disc receives another, thicker metallization layer, and is then bonded to the blank disc using LOCA glue. DVD-R DL and DVD+R DL discs receive a dye layer after curing, but before metallization. CD-R, DVD-R, and DVD+R discs receive the dye layer after pressing but before metallization.

CD-RW, DVD-RW and DVD+RW receive a metal alloy layer sandwiched between 2 dielectric layers. HD DVD is made in the same way as DVD. In recordable and rewritable media, most of the stamper is composed of grooves, not pits and lands.

The grooves contain a wobble frequency that is used to locate the position of the reading or writing laser on the disc. DVDs use pre-pits instead, with a constant frequency wobble.

Blu-ray

HTL (high-to-low type) Blu-ray discs are made differently. First, a silicon wafer is used instead of a glass master. The wafer is processed in the same way a glass master would.

The wafer is then electroplated to form a 300-micron thick nickel stamper, which is peeled off from the wafer. The stamper is mounted onto a mold inside a press or embosser. The polycarbonate discs are molded in a similar fashion to DVD and CD discs.

If the discs being produced are BD-Rs or BD-REs, the mold is fitted with a stamper that stamps a groove pattern onto the discs, in lieu of the pits and lands found on BD-ROM discs. After cooling, a 35 nanometre-thick layer of silver alloy is applied to the disc using sputtering.

Then the second layer is made by applying base and pit transfer resins to the disc, and are pre-cured in its center. After application and pre-curing, the disc is pressed or embossed using a stamper and the resins are immediately cured using intense UV light, before the disc is separated from the stamper. The stamper contains the data that will be transferred to the disc.

This process is known as embossing and is the step that engraves the data onto the disc, replacing the pressing process used in the first layer, and it is also used for multi layer DVD discs. Then, a 30 nanometre-thick layer of silver alloy is then sputtered onto the disc and the process is repeated as many times as required. Each repetition creates a new data layer.

(The resins are applied again, pre-cured, stamped (with data or grooves) and cured, silver alloy is sputtered and so on) BD-R and BD-RE discs receive (through sputtering) a metal (recording layer) alloy (that is sandwiched between two dielectric layers, also sputtered, in BD-RE), before receiving the 30 nanometre metallization (silver alloy, aluminum or gold) layer, which is sputtered. Alternatively, the silver alloy may be applied before the recording layer is applied.

Silver alloys are usually used in Blu-rays, and aluminum is usually used on CDs and DVDs. Gold is used in some archival CDs and DVDs, since it is more chemically inert and resistant to corrosion than aluminum, which corrodes into aluminum oxide, which can be seen in disc rot as transparent patches or dots in the disc, that prevent the disc from being read, since the laser light passes through the disc instead of being reflected back into the laser pickup assembly to be read.

Normally, aluminum does not corrode since it has a thin oxide layer that forms on contact with oxygen. In this case, it can corrode due to its thinness. Then, the 98 micron-thick cover layer is applied using UV-curable liquid optically clear adhesive, and a 2 micron-thick hard coat (such as Durabis) is also applied and cured using UV light.

In the last step, a 10 nanometre-thick silicon nitride barrier layer is applied to the label side of the disc to protect against humidity. Blu-rays have their data very close to the read surface of the disc, which is necessary for Blu-rays to achieve their capacity. Discs in large quantities can either be replicated or duplicated.

In replication, the process explained above is used to make the discs, while in duplication, CD-R, DVD-R or BD-R discs are recorded and finalized to prevent further recording and allow for wider compatibility. (See Optical disc authoring).

The equipment is also different: replication is carried out by fully automated purpose-built machinery whose cost is in the hundreds of thousands of US dollars in the used market, while duplication can be automated (using what's known as an autoloader ) or be done by hand, and only requires a small tabletop duplicator.

See also

Disc Description Protocol List of optical disc manufacturers Universal Disk Format (UDF)

Optical Storage Technology Association Thomson-CSF's transmissive videodisc Longevity of Recordable CDs, DVDs and Blu-rays — Canadian Conservation Institute (CCI) Notes 19/1 et:Optiline andmekandja

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378340170 under CC BY-SA 4.0; modifications have been made.

Words in each sectionOptical disc manufactur…Optical disc manufacturingOptical disc manufacturing: 791 words791First-generationFirst-generationFirst-generation: 742 words742Blu-rayBlu-rayBlu-ray: 621 words621Surface error scanningSurface error scanningSurface error scanning: 254 words254Third-generationThird-generationThird-generation: 226 words226Second-generationSecond-generationSecond-generation: 159 words159Fourth-generationFourth-generationFourth-generation: 152 words152Recordable and writable…Recordable and writable optical discsRecordable and writable optical discs: 133 words133See alsoSee alsoSee also: 12 words12
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

References

  1. ↩Wikipedia “Optical disc” revision 1378340170 · retrieved 2026-10-20 release date (×3) · confidence 0.95 revision URL

Provenance

snapshot enwiki-001378340170 · captured 2026-10-03 · ledger · version history

Cite this page as: encyclopegia.org, “Optical disc”, snapshot enwiki-001378340170. https://encyclopegia.org/a/optical-disc