Optical fiber
fiber optic audio cable with red light shining in one end and out the other An optical fiber, or optical fibre, is a flexible glass or plastic fiber that can transmit light from one end to the other.
≈ 9 min read
Optical fiber. encyclopegia.org, snapshot enwiki-001378489102. /a/optical-fiber
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
fiber optic audio cable with red light shining in one end and out the other An optical fiber, or optical fibre, is a flexible glass or plastic fiber that can transmit light from one end to the other. Such fibers are widely used in fiber-optic communication, where they permit transmission over longer distances and at higher bandwidths (data transfer rates) than electrical cables.
Fibers are used instead of cables because signals travel along them with less loss and are immune to electromagnetic interference. Fibers are also used for illumination and imaging, and are often wrapped in bundles so they may be used to carry light into, or images out of confined spaces, as in the case of a fiberscope.
Specially designed fibers are also used for a variety of other applications, such as fiber optic sensors and fiber lasers. Glass optical fibers are typically made by drawing, while plastic fibers can be made either by drawing or by extrusion. Optical fibers typically include a core surrounded by a transparent cladding material with a lower index of refraction.
Light is kept in the core by the phenomenon of total internal reflection which causes the fiber to act as a waveguide. Fibers that support many propagation paths or transverse modes are called multi-mode fibers, while those that support a single mode are called single-mode fibers (SMF).…
fiber optic audio cable with red light shining in one end and out the other]] An optical fiber, or optical fibre, is a flexible glass or plastic fiber that can transmit light from one end to the other. Such fibers are widely used in fiber-optic communication, where they permit transmission over longer distances and at higher bandwidths (data transfer rates) than electrical cables.
Fibers are used instead of cables because signals travel along them with less loss and are immune to electromagnetic interference. Fibers are also used for illumination and imaging, and are often wrapped in bundles so they may be used to carry light into, or images out of confined spaces, as in the case of a fiberscope.
Specially designed fibers are also used for a variety of other applications, such as fiber optic sensors and fiber lasers. Glass optical fibers are typically made by drawing, while plastic fibers can be made either by drawing or by extrusion. Optical fibers typically include a core surrounded by a transparent cladding material with a lower index of refraction.
Light is kept in the core by the phenomenon of total internal reflection which causes the fiber to act as a waveguide. Fibers that support many propagation paths or transverse modes are called multi-mode fibers, while those that support a single mode are called single-mode fibers (SMF).
Multi-mode fibers generally have a wider core diameter and are used for short-distance communication links and for applications where high power must be transmitted. Single-mode fibers are used for most communication links longer than . Being able to join optical fibers with low loss is important in fiber optic communication.
This is more complex than joining electrical wire or cable and involves careful cleaving of the fibers, precise alignment of the fiber cores, and the coupling of these aligned cores. For applications that demand a permanent connection, a fusion splice is common. In this technique, an electric arc is used to melt the ends of the fibers together.
Another common technique is a mechanical splice, where the ends of the fibers are held in contact by mechanical force. Temporary or semi-permanent connections are made by means of specialized optical fiber connectors. The field of applied science and engineering concerned with the design and application of optical fibers is known as fiber optics.
The term was coined by Indian-American physicist Narinder Singh Kapany.
Daylighting
In some buildings, optical fibers route sunlight from the roof to the interior of the building (daylighting). An optical fiber-based daylighting setup typically requires a parabolic collector to track the sun and concentrate its light into the fiber bundle.
These setups use two kinds of fiber: Optical fibers intended for light transport need to propagate as much light as possible within the core, while optical fibers intended for light distribution are designed to let part of the light leak through their cladding.
Hybrid solar
Scattering depends on the wavelength of the light being scattered and on the size of the scattering centers. The angular dependence of the light intensity scattered from an optical fiber matches that of Rayleigh scattering, indicating that the scattering centers are much smaller than the wavelength of propagating light.
It originates from the density fluctuations driven by the fictive temperature of the glass, and from the concentration fluctuations of dopants in both the core and the cladding. Rayleigh scattering coefficient, R, can be presented as : R = R_\text{d} + R_\text{c} where represents Rayleigh scattering on density fluctuations and represents Rayleigh scattering on dopant concentration fluctuations.
Dopants, such as germanium dioxide or fluorine, are used to create the refractive index difference between the core and the cladding to form a waveguide structure. R_\text{d} = \frac{8 \pi^3}{3 \lambda^4} n^8 p^2 \beta_\text{c} k_\text{B} T_\text{f} where is wavelength, is refractive index, is photo-elastic coefficient, is isothermal compressibility, is the Boltzmann constant, is fictive temperature.
The only physically significant variable affecting scattering on density fluctuations is the fictive temperature of the glass; a lower fictive temperature results in a more homogeneous glass and lower Rayleigh scattering. Fictive temperature may be dramatically reduced by about 100 wt. ppm of alkali oxide dopant in the fiber core, as well as slower cooling of the fiber during the fiber draw process.
These approaches are used to produce optical fibers with the lowest attenuation, especially those for submarine telecom cables. For small dopant concentrations, is proportional to , where is the mole fraction of the dopant in SiO 2 -based glass and is the refractive index of the glass.
When GeO 2 dopant is used to increase the refractive index of the fiber core, it increases the concentration fluctuation component of Rayleigh scattering and attenuation of the fiber. This is why the lowest attenuation fibers do not use GeO 2 in the core, and use fluorine in the cladding, to reduce the refractive index of the cladding. in pure silica core fiber is proportional to the overlap integral between LP01 mode and fluorine-induced concentration fluctuation component in the cladding.
In the core of potassium-doped pure silica-core (KPSC) fiber only density fluctuations play a significant role, as the concentrations of K 2 O, fluorine and chlorine are very low. The density fluctuations in the core are moderated by lower fictive temperature resulting from potassium doping, and are further reduced by annealing during the fiber draw process.
This differs from the cladding, where higher fluorine dopant levels and the resulting concentration fluctuations add to the loss. In such fibers, the light travelling through the core experiences lower scattering and lower attenuation compared to the light propagating through the cladding segment of the fiber.
At high optical powers, scattering can also be caused by nonlinear optical processes in the fiber. Loss = dB loss per connector × number of connectors + dB loss per splice × number of splices + dB loss per kilometer × kilometers of fiber, where the dB loss per kilometer is a function of the type of fiber and can be found in the manufacturer's specifications.
For example, a typical 1550 nm single-mode fiber has a loss of 0.3 dB per kilometer. The calculated loss budget is used when testing to confirm that the measured loss is within the normal operating parameters. The thickness of the coating is taken into account when calculating the stress that the fiber experiences under different bend configurations.
When a coated fiber is wrapped around a mandrel, the stress experienced by the fiber is given by \sigma = E {d_\text{f} \over d_\text{m} + d_\text{c}}, where is the fiber's Young's modulus, is the diameter of the mandrel, is the diameter of the cladding and is the diameter of the coating. In a two-point bend configuration, a coated fiber is bent in a U-shape and placed between the grooves of two faceplates, which are brought together until the fiber breaks.
The stress in the fiber in this configuration is given by \sigma = 1.198E {d_\text{f} \over d - d_\text{c}}, where is the distance between the faceplates. The coefficient 1.198 is a geometric constant associated with this configuration. Fiber optic coatings protect the glass fibers from scratches that could lead to strength degradation.
The combination of moisture and scratches accelerates the aging and deterioration of fiber strength. When fiber is subjected to low stresses over a long period, fiber fatigue can occur. Over time or in extreme conditions, these factors combine to cause microscopic flaws in the glass fiber to propagate, which can ultimately result in fiber failure.
Three key characteristics of fiber optic waveguides can be affected by environmental conditions: strength, attenuation, and resistance to losses caused by microbending. External optical fiber cable jackets and buffer tubes protect glass optical fiber from environmental conditions that can affect the fiber's performance and long-term durability.
On the inside, coatings ensure the reliability of the signal being carried and help minimize attenuation due to microbending. GR-771, Generic Requirements for Fiber Optic Splice Closures, Telcordia Technologies, Issue 2, July 2008.
Discusses fiber optic splice closures and the associated hardware intended to restore the mechanical and environmental integrity of one or more fiber cables entering the enclosure.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378489102 under CC BY-SA 4.0; modifications have been made.