Oscilloscope types

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

This is a subdivision of the Oscilloscope article, discussing the various types and models of oscilloscopes in greater detail.

This is a subdivision of the Oscilloscope article, discussing the various types and models of oscilloscopes in greater detail.

Digital oscilloscopes

While analog devices make use of continually varying voltages, digital devices employ binary numbers which correspond to samples of the voltage. In the case of digital oscilloscopes, an analog-to-digital converter (ADC) is used to change the measured voltages into digital information. Waveforms are taken as a series of samples. The samples are stored, accumulating until enough are taken in order to describe the waveform, which are then reassembled for display. Digital technology allows the information to be displayed with brightness, clarity, and stability. There are, however, limitations as with the performance of any oscilloscope. The highest frequency at which the oscilloscope can operate is determined by the analog bandwidth of the front-end components of the instrument and the sampling rate. Digital oscilloscopes can be classified into two primary categories: digital storage oscilloscopes and digital sampling oscilloscopes. Newer variants include PC-based oscilloscopes (which attach to a PC for data processing and display) and mixed-signal oscilloscopes (which employ other functions in addition to voltage measurement).

Digital sampling oscilloscopes

Digital sampling oscilloscopes operate on the same principle as analog sampling oscilloscopes and, like their analog counterparts, are of great use when analyzing high-frequency signals; that is, repetitive signals whose frequencies are higher than the oscilloscope's sampling rate. For measuring repetitive signals, this type once used to offer bandwidth and high-speed timing up to ten times greater than any real-time oscilloscope. A real-time oscilloscope, which also used to be called a “single-shot” scope, captures an entire waveform on each trigger event. This requires the scope to capture a large number of data points in one continuous record. A sequential equivalent-time sampling oscilloscope, sometimes simply called a “sampling scope,” measures the input signal only once per trigger. The next time the scope is triggered, a small delay is added and another sample is taken. Thus a large number of trigger events must occur in order to collect enough samples to build a picture of the waveform. The measurement bandwidth is determined by the frequency response of the sampler which currently can extend beyond 90 GHz. An alternative to sequential equivalent-time sampling is called random equivalent-time sampling. Samples are synchronised not with trigger events but with the scope's internal sampling clock. This causes them to occur at apparently random times relative to the trigger event. The scope measures the time interval between the trigger and each sample, and uses this to locate the sample correctly on the x-axis. This process continues until enough samples have been collected to build up a picture of the waveform. The advantage of this technique over sequential equivalent-time sampling is that the scope can collect data from before the trigger event as well as after it, in a similar way to the pre-trigger function of most real-time digital storage scopes. Random equivalent-time sampling can be integrated into a standard DSO without requiring special sampling hardware, but has the disadvantage of poorer timing precision than the sequential sampling method. However, due to the progress in ADC technology which has led to real-time oscilloscopes with bandwidths over 100 GHz, the demand for digital sampling oscilloscopes has been shrinking, as has the need for integrating equivalent time sampling in real-time oscilloscopes.

See also

Mechanical oscilloscopes

Text derived from https://en.wikipedia.org/w/index.php?oldid=1344994863 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.