Lesson plan
Otto cycle
: the intake (0-1 and colored green) stroke is performed by an isobaric expansion, followed by an adiabatic compression (1-2 and colored orange) stroke. Through the combustion of fuel, heat is added in a constant volume (isochoric process) process (2-3), followed by an adiabatic expansion process power (3-4 and colored red) stroke. The cycle is closed by the exhaust (4-0 and colored blue) stroke, characterized by isochoric cooling and isobaric compression processes. An Otto cycle (named after Nicolaus Otto) is an idealized thermodynamic cycle that describes the functioning of a typical spark ignition piston engine. It is the thermodynamic cycle most commonly found in automobile engines. The Otto cycle is a description of what happens to a gas as it is subjected to changes of pressure, temperature, volume, addition of heat, and removal of heat. The gas that is subjected to those changes is called the system. The system, in this case, is defined to be the fluid (gas) within the cylinder. Conversely, by describing the changes that take place within the system it also describes the system's effect on the environment. The purpose of the Otto cycle is to study the production of net work from the system that can propel a vehicle and its occupants in the environment.…
Article summary
: the intake (0-1 and colored green) stroke is performed by an isobaric expansion, followed by an adiabatic compression (1-2 and colored orange) stroke. Through the combustion of fuel, heat is added in a constant volume (isochoric process) process (2-3), followed by an adiabatic expansion process power (3-4 and colored red) stroke. The cycle is closed by the exhaust (4-0 and colored blue) stroke, characterized by isochoric cooling and isobaric compression processes. An Otto cycle (named after Nicolaus Otto) is an idealized thermodynamic cycle that describes the functioning of a typical spark ignition piston engine. It is the thermodynamic cycle most commonly found in automobile engines. The Otto cycle is a description of what happens to a gas as it is subjected to changes of pressure, temperature, volume, addition of heat, and removal of heat. The gas that is subjected to those changes is called the system. The system, in this case, is defined to be the fluid (gas) within the cylinder. Conversely, by describing the changes that take place within the system it also describes the system's effect on the environment. The purpose of the Otto cycle is to study the production of net work from the system that can propel a vehicle and its occupants in the environment.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.