Lesson plan

Overbore

Overbore cartridges are those with a relatively large case volume or case capacity, coupled with a relatively small diameter bullet. The case volume or case capacity and barrel bore area can be mathematically related to obtain a case volume to bore area ratio in metric or imperial units. {O_{ratio}} = \frac{Volume_{case}}{Area_{bore}} where: * Volume_{case} = the cartridge case internal volume or case capacity (in ml or (for non-metric users) grains of water) * Area_{bore} = barrel bore cross section area (in cm 2 or in 2 ) The higher the O ratio result, the more overbore a cartridge will be. As the ratio is expressed in units of length, relatively high O ratio is a good predictor of suitability for relatively long barreled guns. O ratio is also used to predict barrel life in cartridges of the same caliber, but not of different calibres, since the ratio is an extensive quantity that does not correlate to temperature or pressure (e.g. a .50 caliber straight-wall cartridge (.500 Bushwhacker) may have the same overbore as a necked down .17 caliber bottleneck cartridge (.17 Remington)).

Back to article

Article summary

Overbore cartridges are those with a relatively large case volume or case capacity, coupled with a relatively small diameter bullet. The case volume or case capacity and barrel bore area can be mathematically related to obtain a case volume to bore area ratio in metric or imperial units. {O_{ratio}} = \frac{Volume_{case}}{Area_{bore}} where: * Volume_{case} = the cartridge case internal volume or case capacity (in ml or (for non-metric users) grains of water) * Area_{bore} = barrel bore cross section area (in cm 2 or in 2 ) The higher the O ratio result, the more overbore a cartridge will be. As the ratio is expressed in units of length, relatively high O ratio is a good predictor of suitability for relatively long barreled guns. O ratio is also used to predict barrel life in cartridges of the same caliber, but not of different calibres, since the ratio is an extensive quantity that does not correlate to temperature or pressure (e.g. a .50 caliber straight-wall cartridge (.500 Bushwhacker) may have the same overbore as a necked down .17 caliber bottleneck cartridge (.17 Remington)).

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.