Overhead line

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

An overhead line or overhead wire is an electrical cable that is used to transmit electrical energy to electric locomotives, electric multiple units, trolleybuses or trams. The generic term used by the International Union of Railways for the technology is overhead line.

It is known variously as overhead catenary, overhead contact line (OCL), overhead contact system (OCS), overhead equipment (OHE), overhead line equipment (OLE or OHLE), overhead lines (OHL), overhead wiring (OHW), traction wire, and trolley wire. An overhead line consists of one or more wires (or rails, particularly in tunnels) situated over rail tracks, raised to a high electrical potential by connection to feeder stations at regularly spaced intervals along the track.

The feeder stations are usually fed from a high-voltage electrical grid.

An overhead line or overhead wire is an electrical cable that is used to transmit electrical energy to electric locomotives, electric multiple units, trolleybuses or trams. The generic term used by the International Union of Railways for the technology is overhead line.

It is known variously as overhead catenary, overhead contact line (OCL), overhead contact system (OCS), overhead equipment (OHE), overhead line equipment (OLE or OHLE), overhead lines (OHL), overhead wiring (OHW), traction wire, and trolley wire. An overhead line consists of one or more wires (or rails, particularly in tunnels) situated over rail tracks, raised to a high electrical potential by connection to feeder stations at regularly spaced intervals along the track.

The feeder stations are usually fed from a high-voltage electrical grid.

Overhead catenary

Line C trenches and tunnels in central Paris , retrofitted to include overhead catenary lines A catenary is a system of overhead wires used to supply electricity to a locomotive, tram (streetcar), or light rail vehicle that is equipped with a pantograph. , Bucharest Unlike simple overhead wires, in which the uninsulated wire is attached by clamps to closely spaced crosswires supported by poles, catenary systems use at least two wires. The catenary or messenger wire is hung at a specific tension between line structures, and a second wire is held in tension by the messenger wire, attached to it at frequent intervals by clamps and connecting wires known as droppers.

The second wire is straight and level, parallel to the rail track, suspended over it as the roadway of a suspension bridge is over water. Catenary systems are suited to high-speed operations whereas simple wire systems, which are less expensive to build and maintain, are common on light rail or tram (streetcar) lines, especially on city streets.

Such vehicles can be fitted with either a pantograph or trolley pole.

Overhead catenary systems in the United States

Amtrak's Northeast Corridor in the United States has catenary over the between Boston, Massachusetts, and Washington, D.C., for inter-city trains. Commuter rail agencies including MARC, SEPTA, NJ Transit, and Metro-North Railroad use the catenary to provide local service.

Amtrak's Keystone Corridor is electrified on the stretch between Philadelphia and Harrisburg, Pennsylvania, which sees intercity service between New York City and Harrisburg via Philadelphia, as well as SEPTA commuter trains. New Jersey Transit operates a network of electrified rail lines originating at Hoboken Terminal and New York's Penn Station; including the North Jersey Coast Line (up to Long Branch), Morristown Line (up to Dover), Montclair-Boonton Line (up to Hackettstown via diesel transfer or electric to Montclair/Great Notch), and the Gladstone Branch.

NJT also operates a short 2.7-mile spur between Princeton Junction and Princeton, New Jersey, known as the Princeton Branch. In the Philadelphia metropolitan area, SEPTA operates an extensive network of 13 electrified rail lines originating at 30th Street Station in Philadelphia, totaling .

In Cleveland, Ohio, interurban/light rail lines and a heavy rail line use the same overhead wires, due to a city ordinance intended to limit air pollution from the large number of steam trains that passed through Cleveland between the east coast and Chicago. Trains switched from steam to electric locomotives at the Collinwood railyards about east of Downtown and at Linndale on the west side.

When Cleveland constructed its rapid transit (heavy rail) line between the airport, downtown, and beyond, it employed a similar catenary, using electrification equipment left over after railroads switched from steam to diesel. Light and heavy rail share trackage for about along the Cleveland Hopkins International Airport Red (heavy rail) line, Blue and Green interurban/light rail lines between Cleveland Union Terminal and just past East 55th Street station, where the lines separate.

Electrified heavy rail operations are set to be phased out beginning in 2026 with the introduction of light rail vehicles on the RTA Red Line Part of Boston's Blue Line through the northeast suburbs uses overhead lines, as does the Green Line. In the Chicago metropolitan area, both Metra and NICTD have a network of electrified commuter lines originating at Millennium Station.

The electrification extends South Bend and Munster in Indiana, as well as Blue Island and University Park in Illinois. The Yellow Line on the Chicago "L" used an overhead catenary system for the west half of the route, switching to third rail for the east half. This was discontinued in 2004 when the entire route was converted to third rail.

Denver's RTD operates a mixture of 4 electrified heavy rail and 6 light rail rapid transit lines throughout the Denver metropolitan area, totalling of track. On the San Francisco Peninsula in California, the Caltrain commuter rail system completed the installation of an overhead contact system (OCS) in 2023, to prepare for the conversion of its 160-year old San Francisco-to-San José Peninsula Corridor to fully electrified service in September 2024.

Problems with overhead equipment

Overhead lines may be damaged by strong winds. Lightning can hit overhead wires or supporting systems, stopping trains with a power surge. During cold or frosty weather, ice may coat overhead lines.

This can result in poor electrical contact between the collector and the overhead line, resulting in electrical arcing and power surges. Ice coatings also add extra weight, as well as increase their surface area exposed to wind, consequently increasing the load on the wires and their supports.

Lines may sag during hot weather and if a pantograph gets entangled, this can result in a dewirement. Similarly, in very cold weather they may contract and snap. The installation of overhead lines may require reconstruction of bridges to provide safe electrical clearance.

Overhead lines, like most electrified systems, require a greater capital expenditure when building the system than an equivalent non-electric system. While a unelectrified railway line requires only the grade, ballast, ties and rails, an overhead system also requires a complex system of support structures, lines, insulators, power-control systems and power lines, all of which require maintenance.

This makes non-electrical systems more attractive in the short term, although electrical systems can pay for themselves eventually. Also, the added construction and maintenance cost-per-mile makes overhead systems less attractive on already existing long-distance railways, such as those found in North America, where the distances between cities are typically far greater than in Europe.

Such long lines require enormous investment in overhead line equipment, which private rail companies are unlikely to be interested in, and major difficulties confront energizing long portions of overhead wire on a permanent basis, especially in areas where energy demand already outstrips supply. Many people consider overhead lines to be "visual pollution", due to the many support structures and complicated system of wires and cables that fill the air.

Such considerations have driven the move towards replacing overhead power and communications lines with buried cables where possible. The issue came to a head in the UK with the Great Western Main Line electrification scheme, especially through the Goring Gap. A protest group with their own website has been formed.

The valuable copper conductor can also be subject to theft, as for example the Lahore-Khanewal line in Pakistan and the Gweru-Harare section of line in Zimbabwe.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377748240 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

20 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.