Overlap–save method

In signal processing, overlap–save is the traditional name for an efficient way to evaluate the discrete convolution between a very long signal x[n] and a finite impulse response (FIR) filter h[n] : where for m outside the region .

Uses your system voice; voice and rate in settings.

Snapshot

≈ 9 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In signal processing, overlap–save is the traditional name for an efficient way to evaluate the discrete convolution between a very long signal x[n] and a finite impulse response (FIR) filter h[n]:

y[n]=x[n]∗h[n] ≜ ∑m=−∞∞h[m]⋅x[n−m]=∑m=1Mh[m]⋅x[n−m],     Eq.1

where h[m] = 0 for m outside the region [1, M]. This article uses common abstract notations, such as y(t)=x(t)∗h(t), or y(t)=ℋ{x(t)}, in which it is understood that the functions should be thought of in their totality, rather than at specific instants t (see Convolution#Notation).

The concept is to compute short segments of y[n] of an arbitrary length L, and concatenate the segments together. That requires longer input segments that overlap the next input segment. The overlapped data gets "saved" and used a second time.[1] First we describe that process with just conventional convolution for each output segment. Then we describe how to replace that convolution with a more efficient method.

Consider a segment that begins at n = kL + M, for any integer k, and define:

xk[n] ≜{x[n+kL],1≤n≤L+M−10,otherwise.
yk[n] ≜ xk[n]∗h[n]=∑m=1Mh[m]⋅xk[n−m].

Then, for kL+M+1≤n≤kL+L+M, and equivalently M+1≤n−kL≤L+M, we can write:

y[n]=∑m=1Mh[m]⋅xk[n−kL−m]  ≜  yk[n−kL].

With the substitution j=n−kL, the task is reduced to computing yk[j] for M+1≤j≤L+M. These steps are illustrated in the first 3 traces of Figure 1, except that the desired portion of the output (third trace) corresponds to 1  ≤  j  ≤  L.[B]

If we periodically extend xk[n] with period N  ≥  L + M − 1, according to:

xk,N[n] ≜ ∑ℓ=−∞∞xk[n−ℓN],

the convolutions  (xk,N)∗h  and  xk∗h  are equivalent in the region M+1≤n≤L+M. It is therefore sufficient to compute the N-point circular (or cyclic) convolution of xk[n] with h[n]  in the region [1, N]. The subregion [M + 1, L + M] is appended to the output stream, and the other values are discarded. The advantage is that the circular convolution can be computed more efficiently than linear convolution, according to the circular convolution theorem:

yk[n] = IDFTN( DFTN(xk[n])⋅ DFTN(h[n]) ),     Eq.2

where:

  • DFTN and IDFTN refer to the Discrete Fourier transform and its inverse, evaluated over N discrete points, and
  • L is customarily chosen such that N = L+M-1 is an integer power-of-2, and the transforms are implemented with the FFT algorithm, for efficiency.
  • The leading and trailing edge-effects of circular convolution are overlapped and added,[C] and subsequently discarded.[D]

Pseudocode

edit edit source (Overlap-save algorithm for linear convolution) h = FIR_impulse_response M = length(h) overlap = M − 1 N = 8 × overlap (see next section for a better choice) step_size = N − overlap H = DFT(h, N) position = 0 while position + N ≤ length(x) yt = IDFT(DFT(x(position+(1:N))) × H) y(position+(1:step_size)) = yt(M : N) (discard M−1 y-values) position = position + step_size end

Efficiency considerations

edit edit source

When the DFT and IDFT are implemented by the FFT algorithm, the pseudocode above requires about N (log2(N) + 1) complex multiplications for the FFT, product of arrays, and IFFT.[E] Each iteration produces N-M+1 output samples, so the number of complex multiplications per output sample is about:

N(log2(N)+1)N−M+1.     Eq.3

For example, when M=201 and N=1024, Eq.3 equals 13.67, whereas direct evaluation of Eq.1 would require up to 201 complex multiplications per output sample, the worst case being when both x and h are complex-valued. Also note that for any given M, Eq.3 has a minimum with respect to N. Figure 2 is a graph of the values of N that minimize Eq.3 for a range of filter lengths (M).

Instead of Eq.1, we can also consider applying Eq.2 to a long sequence of length Nx samples. The total number of complex multiplications would be:

Nx⋅(log2(Nx)+1).

Comparatively, the number of complex multiplications required by the pseudocode algorithm is:

Nx⋅(log2(N)+1)⋅NN−M+1.

Hence the cost of the overlap–save method scales almost as O(Nxlog2N) while the cost of a single, large circular convolution is almost O(Nxlog2Nx).

Overlap–discard

edit edit source

Overlap–discard[2] and Overlap–scrap[3] are less commonly used labels for the same method described here. However, these labels are actually better (than overlap–save) to distinguish from overlap–add, because both methods "save", but only one discards. "Save" merely refers to the fact that M − 1 input (or output) samples from segment k are needed to process segment k + 1.

Extending overlap–save

edit edit source

The overlap–save algorithm can be extended to include other common operations of a system:[F][4]

  • additional IFFT channels can be processed more cheaply than the first by reusing the forward FFT
  • sampling rates can be changed by using different sized forward and inverse FFTs
  • frequency translation (mixing) can be accomplished by rearranging frequency bins

See also

edit edit source

Notes

edit edit source
  1. ^ Rabiner and Gold, Fig 2.35, fourth trace. Wikipedia revision 1359311869, retrieved 2026-11-19
  2. ^ Shifting the undesirable edge effects to the last M-1 outputs is a potential run-time convenience, because the IDFT can be computed in the y[n] buffer, instead of being computed and copied. Then the edge effects can be overwritten by the next IDFT. A subsequent footnote explains how the shift is done, by a time-shift of the impulse response. Wikipedia revision 1359311869, retrieved 2026-11-19
  3. ^ Not to be confused with the Overlap-add method, which preserves separate leading and trailing edge-effects. Wikipedia revision 1359311869, retrieved 2026-11-19
  4. ^ The edge effects can be moved from the front to the back of the IDFT output by replacing DFTN(h[n]) with DFTN(h[n+M−1])= DFTN(h[n+M−1−N]), meaning that the N-length buffer is circularly-shifted (rotated) by M-1 samples. Thus the h(M) element is at n=1. The h(M-1) element is at n=N. h(M-2) is at n=N-1. Etc. Wikipedia revision 1359311869, retrieved 2026-11-19
  5. ^ Cooley–Tukey FFT algorithm for N=2k needs (N/2) log2(N) – see FFT – Definition and speed Wikipedia revision 1359311869, retrieved 2026-11-19
  6. ^ Carlin et al. 1999, p 31, col 20. Wikipedia revision 1359311869, retrieved 2026-11-19

References

edit edit source
  1. ^ "Overlap-Add (OLA) STFT Processing | Spectral Audio Signal Processing". www.dsprelated.com. Retrieved 2024-03-02. The name overlap-save comes from the fact that L-1 samples of the previous frame [here: M-1 samples of the current frame] are saved for computing the next frame. Wikipedia revision 1359311869, retrieved 2026-11-19
  2. ^ Harris, F.J. (1987). D.F.Elliot (ed.). Handbook of Digital Signal Processing. San Diego: Academic Press. pp. 633–699. ISBN 0122370759. Wikipedia revision 1359311869, retrieved 2026-11-19
  3. ^ Frerking, Marvin (1994). Digital Signal Processing in Communication Systems. New York: Van Nostrand Reinhold. ISBN 0442016166. Wikipedia revision 1359311869, retrieved 2026-11-19
  4. ^ Borgerding, Mark (2006). "Turning Overlap–Save into a Multiband Mixing, Downsampling Filter Bank". IEEE Signal Processing Magazine. 23 (March 2006): 158–161. Bibcode:2006ISPM...23..158B. doi:10.1109/MSP.2006.1598092. Wikipedia revision 1359311869, retrieved 2026-11-19
  1. Rabiner, Lawrence R.; Gold, Bernard (1975). "2.25". Theory and application of digital signal processing. Englewood Cliffs, N.J.: Prentice-Hall. pp. 63–67. ISBN 0-13-914101-4.
  2. US patent 6898235, Carlin, Joe; Collins, Terry & Hays, Peter et al., "Wideband communication intercept and direction finding device using hyperchannelization", published 1999-12-10, issued 2005-05-24 , also available at https://patentimages.storage.googleapis.com/4d/39/2a/cec2ae6f33c1e7/US6898235.pdf
edit edit source

Text derived from https://en.wikipedia.org/w/index.php?oldid=1359311869 under CC BY-SA 4.0; modifications have been made.