overspeed
≈ 3 min read
Names in other languages
- اردوتیز رفتاری
- Englishoverspeed
- EnglishOverspeed
- Françaissurrégime
- ItalianoFuorigiri
- 日本語過回転
- 中文超速
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Overspeed, also referred to as over-rev, is a condition in which an engine is allowed or forced to turn beyond its design limit. The consequences of running an engine too fast vary by engine type and model and depend upon several factors, the most important of which are the duration of the overspeed and the speed attained.
With some engines, a momentary overspeed can result in greatly reduced engine life or catastrophic failure. The speed of an engine is typically measured in revolutions per minute (rpm).
Overspeed, also referred to as over-rev, is a condition in which an engine is allowed or forced to turn beyond its design limit. The consequences of running an engine too fast vary by engine type and model and depend upon several factors, the most important of which are the duration of the overspeed and the speed attained.
With some engines, a momentary overspeed can result in greatly reduced engine life or catastrophic failure. The speed of an engine is typically measured in revolutions per minute (rpm).
Examples of overspeed
In a propeller aircraft, an overspeed will occur if the propeller, usually connected directly to the engine, is forced to turn too fast by high-speed airflow while the aircraft is in a dive, moves to a flat blade pitch in cruising flight due to a governor failure or feathering failure, or becomes decoupled from the engine. In a jet aircraft, an overspeed results when the axial compressor exceeds its maximal operating rotational speed.
This often leads to the mechanical failure of turbine blades, flameout and destruction of the engine. In a ground vehicle, an engine can be forced to turn too quickly by changing to an inappropriately low gear. Most unregulated engines will overspeed if power is applied with no or little load.
In the event of diesel engine runaway (caused by excessive intake of combustibles), a diesel engine will overspeed if the condition is not quickly rectified. An example is a diesel engine powering equipment at an oil well head. Suppose the operators hit a pocket of natural gas.
In that case, it will come to the surface and the engine will take in the flammable gas and rapidly increase speed until the engine is destroyed, unless the air intake is shut off, starving the engine of fuel and oxygen.
Overspeed protection
Sometimes a regulator or governor is fitted to make engine overspeed impossible or less likely. For example: Many steam engines use a centrifugal governor, which closes a throttle at high rpm to restrict steam flow as engine speed increases. In motor vehicles, automatic transmissions will change gear to prevent the engine from turning too quickly.
Additionally, almost all modern vehicles are fitted with an electronic rev limiter device that will cut fuel supply or sparks to the engine to prevent overspeed. Some aircraft have constant-speed units that automatically change propeller pitch to keep the engine running at the optimal speed.
Large diesel engines are sometimes fitted with a secondary protection device that actuates if the governor fails. This consists of a flap valve in the air intake. If the engine overspeeds, the airflow through the intake will rise to an abnormal level.
This causes the flap valve to snap shut, starving the engine of air and shutting it down.
See also
Airlines PNG Flight 1600 Overclocking
Text derived from https://en.wikipedia.org/w/index.php?oldid=1375597290 under CC BY-SA 4.0; modifications have been made.