Oxide

of rutile, an important oxide of titanium.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 13 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

An oxide (/ˈɒksaɪd/) is a chemical compound containing at least one oxygen atom and one other element[1] in its chemical formula. "Oxide" itself is the dianion (anion bearing a net charge of −2) of oxygen, an O2− ion with oxygen in the oxidation state of −2. Most of the Earth's crust consists of oxides. Even materials considered pure elements often develop an oxide coating. For example, aluminium foil develops a thin skin of Al2O3 (called a passivation layer) that protects the foil from further oxidation.[2]

Stoichiometry

edit edit source

Oxides are extraordinarily diverse in terms of stoichiometries (the measurable relationship between reactants and chemical equations of an equation or reaction) and in terms of the structures of each stoichiometry. Most elements form oxides of more than one stoichiometry. A well known example is carbon monoxide and carbon dioxide.[2] This applies to binary oxides, that is, compounds containing only oxide and another element. Far more common than binary oxides are oxides of more complex stoichiometries. Such complexity can arise by the introduction of other cations (a positively charged ion, i.e. one that would be attracted to the cathode in electrolysis) or other anions (a negatively charged ion). Iron silicate, Fe2SiO4, the mineral fayalite, is one of many examples of a ternary oxide. For many metal oxides, the possibilities of polymorphism and nonstoichiometry exist as well.[3] The commercially important dioxides of titanium exists in three distinct structures, for example. Many metal oxides exist in various nonstoichiometric states. Many molecular oxides exist with diverse ligands as well.[4]

For simplicity's sake, most of this article focuses on binary oxides.

Formation

edit edit source

Oxides are associated with all elements except a few noble gases. The pathways for the formation of this diverse family of compounds are correspondingly numerous.

Metal oxides

edit edit source

Many metal oxides arise by decomposition of other metal compounds, e.g. carbonates, hydroxides, and nitrates. In the making of calcium oxide, calcium carbonate (limestone) breaks down upon heating, releasing carbon dioxide:[2]

CaCO3 → CaO + CO2

The reaction of elements with oxygen in air is a key step in corrosion relevant to the commercial use of iron especially. Almost all elements form oxides upon heating with oxygen atmosphere. For example, zinc powder will burn in air to give zinc oxide:[5]

2 Zn + O2 → 2 ZnO

The production of metals from ores often involves the production of oxides by roasting (heating) metal sulfide minerals in air. In this way, MoS2 (molybdenite) is converted to molybdenum trioxide, the precursor to virtually all molybdenum compounds:[6]

2 MoS2 + 7 O2 → 2 MoO3 + 4 SO2

Noble metals (such as gold and platinum) are prized because they resist direct chemical combination with oxygen.[2]

Non-metal oxides

edit edit source

Important and prevalent nonmetal oxides are carbon dioxide and carbon monoxide. These species form upon full or partial oxidation of carbon or hydrocarbons. With a deficiency of oxygen, the monoxide is produced:[2]

2 CH4 + 3 O2 → 2 CO + 4 H2O
2 C + O2 → 2 CO

With excess oxygen, the dioxide is the product, the pathway proceeds by the intermediacy of carbon monoxide:

CH4 + 2 O2 → CO2 + 2 H2O
C + O2 → CO2

Elemental nitrogen ( N2) is difficult to convert to oxides, but the combustion of ammonia gives nitric oxide, which further reacts with oxygen:

4 NH3 + 5 O2 → 4 NO + 6 H2O
2 NO + O2 → 2 NO2

These reactions are practiced in the production of nitric acid, a commodity chemical.[7]

The chemical produced on the largest scale industrially is sulfuric acid. It is produced by the oxidation of sulfur to sulfur dioxide, which is separately oxidized to sulfur trioxide:[8]

S + O2 → SO2
2 SO2 + O2 → 2 SO3

Finally the trioxide is converted to sulfuric acid by a hydration reaction:

SO3 + H2O → H2SO4

Structure

edit edit source

Oxides have a range of structures, from individual molecules to polymeric and crystalline structures. At standard conditions, oxides may range from solids to gases. Solid oxides of metals usually have polymeric structures at ambient conditions.[9]

Molecular oxides

edit edit source
  • Some important gaseous oxides
  • Carbon dioxide is the main product of fossil fuel combustion.
  • Carbon monoxide is the product of the incomplete combustion of carbon-based fuels and a precursor to many useful chemicals.
  • Nitrogen dioxide is a problematic pollutant from internal combustion engines.
  • Sulfur dioxide, the principal oxide of sulfur, is emitted from volcanoes.
  • Nitrous oxide ("laughing gas") is a potent greenhouse gas produced by soil bacteria.

Although most metal oxides are crystalline solids, many non-metal oxides are molecules. Examples of molecular oxides are carbon dioxide and carbon monoxide. All simple oxides of nitrogen are molecular, e.g., NO, N2O, NO2 and N2O4. Phosphorus pentoxide is a more complex molecular oxide with a deceptive name, the real formula being P4O10. Tetroxides are rare, with a few more common examples being ruthenium tetroxide, osmium tetroxide, and xenon tetroxide.[2]

Reactions

edit edit source

Reduction

edit edit source

Reduction of metal oxide to the metal is practiced on a large scale in the production of some metals. Many metal oxides convert to metals simply by heating (thermal decomposition). For example, silver oxide decomposes at 200 °C:[10]

2 Ag2O → 4 Ag + O2

Most often, however, metal oxides are reduced by a chemical reagent. A common and cheap reducing agent is carbon in the form of coke. The most prominent example is that of iron ore smelting. Many reactions are involved, but the simplified equation is usually shown as:[2]

2 Fe2O3 + 3 C → 4 Fe + 3 CO2

Some metal oxides dissolve in the presence of reducing agents, which can include organic compounds. Reductive dissolution of ferric oxides is integral to geochemical phenomena such as the iron cycle.[11]

Hydrolysis and dissolution

edit edit source

Because the M–O bonds are typically strong, metal oxides tend to be insoluble in solvents, though they may be attacked by aqueous acids and bases.[2]

Dissolution of oxides often gives oxyanions. Adding aqueous base to P4O10 gives various phosphates. Adding aqueous base to MoO3 gives polyoxometalates. Similarly, Metal peroxide compounds, e.g. [K4Ti(O2)4], arise by reaction of the metal oxides with a alkaline solution of hydrogen peroxide.[12]

Oxycations are somewhat rare, one examples being nitrosonium ( NO+). Some oxycations, e.g. vanadyl, are occasionally represented with abbreviated formula such as VO2+. VO2+ is in fact an aquo complex [VO(H2O)5]2+. Similarly uranyl ( UO2+2) refers to hydrated cations. Related to the oxycations are the oxyhalides, e.g. vanadium oxytrichloride ( VOCl3).[2]

Nomenclature and formulas

edit edit source

The chemical formulas of the oxides of the chemical elements in their highest oxidation state are predictable and are derived from the number of valence electrons for that element. Even the chemical formula of O4, tetraoxygen, is predictable as a group 16 element. One exception is copper, for which the highest oxidation state oxide is copper(II) oxide and not copper(I) oxide. Another exception is fluoride, which does not exist as one might expect—as F2O7—but as OF2.[13]

See also

edit edit source Look up oxide in Wiktionary, the free dictionary.

References

edit edit source
  1. ^ Hein, Morris; Arena, Susan (2006). Foundations of College Chemistry (12th ed.). Wiley. ISBN 978-0-471-74153-4. Wikipedia revision 1374284519, retrieved 2026-11-19
  2. ^ a b c d e f g h i Greenwood, N. N.; & Earnshaw, A. (1997). Chemistry of the Elements (2nd Edn.), Oxford:Butterworth-Heinemann. ISBN 0-7506-3365-4. Wikipedia revision 1374284519, retrieved 2026-11-19
  3. ^ C. N. R. Rao, B. Raveau (1995). Transition Metal Oxides. New York: VCH. ISBN 1-56081-647-3. Wikipedia revision 1374284519, retrieved 2026-11-19
  4. ^ Roesky, Herbert W.; Haiduc, Ionel; Hosmane, Narayan S. (2003). "Organometallic Oxides of Main Group and Transition Elements Downsizing Inorganic Solids to Small Molecular Fragments". Chem. Rev. 103 (7): 2579–2596. doi:10.1021/cr020376q. PMID 12848580. Wikipedia revision 1374284519, retrieved 2026-11-19
  5. ^ Graf, Günter G. (2000). "Zinc". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a28_509. ISBN 3-527-30673-0. Wikipedia revision 1374284519, retrieved 2026-11-19
  6. ^ Roger F. Sebenik; et al. (2005). "Molybdenum and Molybdenum Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a16_655. ISBN 978-3527306732. Wikipedia revision 1374284519, retrieved 2026-11-19
  7. ^ Thiemann, Michael; Scheibler, Erich; Wiegand, Karl Wilhelm (2000). "Nitric Acid, Nitrous Acid, and Nitrogen Oxides". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a17_293. ISBN 978-3527306732. Wikipedia revision 1374284519, retrieved 2026-11-19
  8. ^ Müller, Hermann (2000). "Sulfuric Acid and Sulfur Trioxide". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a25_635. ISBN 3527306730. Wikipedia revision 1374284519, retrieved 2026-11-19
  9. ^ P.A. Cox (2010). Transition Metal Oxides. An Introduction to Their Electronic Structure and Properties. Oxford University Press. ISBN 978-0-19-958894-7. Wikipedia revision 1374284519, retrieved 2026-11-19
  10. ^ "Silver oxide". Wikipedia revision 1374284519, retrieved 2026-11-19
  11. ^ Cornell, R. M.; Schwertmann, U. (2003). The Iron Oxides: Structure, Properties, Reactions, Occurrences and Uses, Second Edition. p. 323. doi:10.1002/3527602097. ISBN 978-3-527-30274-1. Wikipedia revision 1374284519, retrieved 2026-11-19
  12. ^ Bach, Karlie; Garrido Ribó, Eduard; Hirschi, Jacob S.; Mao, Zhiwei; Nord, Makenzie T.; Zakharov, Lev N.; Goulas, Konstantinos A.; Zuehlsdorff, Tim J.; Nyman, May (2025). "Tetraperoxotitanates for High-Capacity Direct Air Capture of Carbon Dioxide". Chemistry of Materials. 37: 48–61. doi:10.1021/acs.chemmater.4c01795. Wikipedia revision 1374284519, retrieved 2026-11-19
  13. ^ Schultz, Emeric (2005). "Fully Exploiting the Potential of the Periodic Table through Pattern Recognition". J. Chem. Educ. 82 (11): 1649. Bibcode:2005JChEd..82.1649S. doi:10.1021/ed082p1649. Wikipedia revision 1374284519, retrieved 2026-11-19
Salts and covalent derivatives of the oxide ion
H2O He
Li2O BeO B6O
BO
B2O3
C2O
C12O9
C3O2
CO
CO2
CO3
CxOy
N2O
NO
N2O2
N2O3
N2O4
NO2
N2O5
NxOy
O22− F Ne
Na2O MgO Al2O
AlO
Al2O3
SiO
SiO2
PO
P4O6
P4O10
SO
S2O2
SO2
SO3
Cl2O
ClO
Cl2O4
ClO2
Cl2O5?
Cl2O6
Cl2O7
Ar
K2O CaO Sc2O3 TiO
Ti2O3
TiO2
VO
V2O3
VO2
V2O5
CrO
Cr2O3
CrO2
CrO3
MnO
Mn3O4
Mn2O3
MnO2
Mn2O7
FeO
Fe3O4
Fe2O3
CoO
Co3O4
Co2O3
NiO
Ni2O3
Cu2O
CuO
ZnO Ga2O
Ga2O3
GeO
GeO2
As2O3
As2O5
SeO2
SeO3
Br2O
BrO
BrO2
Br3O8
Kr
Rb2O SrO YO
Y2O3
ZrO
ZrO2
NbO
NbO2
Nb2O5
MoO2
MoO3
TcO2
Tc2O7
RuO2
RuO4
Rh2O3
RhO2
PdO Ag2O
Ag4O4
Ag2O3
CdO In2O3 SnO
SnO2
Sb2O3
Sb2O4
Sb2O5
TeO2
TeO3
I2O
IO
IO2
I2O5
XeO3
XeO4
Cs2O BaO * Lu2O3 HfO2 Ta2O5 W2O3
WO2
"W2O5"
WO3
ReO2
ReO3
Re2O7
OsO2
OsO4
IrO2
IrO4
PtO2 Au2O3 Hg2O
HgO
Tl2O
Tl2O3
PbO
Pb3O4
PbO2
Bi2O3
Bi2O5
PoO
PoO2
PoO3
At Rn
Fr RaO ** Lr RfO2? Db2O5? SgO3 Bh2O7? HsO4 Mt Ds Rg Cn Nh Fl Mc Lv Ts Og
 
* La2O3 Ce2O3
CeO2
Pr2O3
Pr6O11
PrO2
NdO
Nd2O3
Pm2O3 SmO
Sm2O3
EuO
Eu2O3
Gd2O3 Tb2O3
Tb4O7
TbO2
Dy2O3 Ho2O3 Er2O3 Tm2O3 YbO
Yb2O3
** Ac2O3 ThO
ThO2
PaO
PaO2
Pa2O5
UO2
U2O5
U3O8
UO3
Np2O3
NpO2
Np2O5
NpO3
Pu2O3
PuO2
PuO3
Am2O3
AmO2
Cm2O3
CmO2
BkO
Bk2O3
BkO2
Cf2O3
CfO2
Es2O3 Fm Md No
Monatomic anion compoundsGroup 1 Group 11 Group 13 Group 14 Group 15 (Pnictides) Group 16 (Chalcogenides) Group 17 (Halides) InternationalNationalOther

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374284519 under CC BY-SA 4.0; modifications have been made.