package on a package
integrated circuit packaging method
≈ 5 min read
Names in other languages
- Englishpackage on a package
- caPackage on package
- DeutschPackage-on-Package
- Magyarpackage on package
- ItalianoPackage on Package
- NederlandsPackage-on-package
- 한국어패키지 온 패키지
- 中文層疊式封裝
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Package on a package, or package on package (PoP), is an integrated circuit packaging method to vertically combine ball grid array (BGA) packages for discrete logic and memory. Two or more packages are installed atop each other, i.e. stacked, with a standard interface to route signals between them.
PoP allows higher component density in devices, such as mobile phones, personal digital assistants (PDA), and digital cameras, at the cost of being slightly taller. Stacks with more than 2 packages are uncommon, due to heat dissipation considerations.
Configuration
Two widely used configurations exist for PoP: Pure memory stacking: two or more memory only packages are stacked on each other Mixed logic-memory stacking: logic (CPU) package on the bottom, memory package on top. For example, the bottom could be a system on a chip (SoC) for a mobile phone.
The logic package is on the bottom because it needs many more BGA connections to the motherboard. s or baseband modems from 2005 onward During PCB assembly, the bottom package of a PoP stack is placed directly on the PCB, and the other package(s) of the stack are stacked on top. The packages of a PoP stack become attached to each other (and to the PCB) during reflow soldering.
PoP packaging can be done by the chip manufacturer (such as Samsung or TSMC), or can be done by the OEM (such as Xiaomi).
Benefits
The package on a package technique tries to combine the benefits of traditional packaging with the benefits of die-stacking techniques, while avoiding their drawbacks. Traditional packaging places each die in its own package, a package designed for normal PCB assembly techniques that place each package directly on the PCB side-by-side.
The 3D die-stacking system in package (SiP) techniques stacks multiple die in a single package, which has several advantages and also some disadvantages compared to traditional PCB assembly. In embedded PoP techniques, chips are embedded in a substrate on the bottom of the package.
This PoP technology enables smaller packages with shorter electrical connections and is supported by companies such as Advanced Semiconductor Engineering (ASE).
JEDEC standardization
JEDEC JC-11 committee deals with package outline drawing standards related to the bottom PoP package. See documents MO-266A and JEDEC publication 95, Design Guide 4.22. JEDEC JC-63 committee deals with top (memory) PoP package pinout standardization. See JEDEC Standard No. 21-C, Page 3.12.2 – 1
Other names
Package on a package is also known by other names: PoP: refers to the combined top and bottom packages PoPt: refers to the top package PoPb: refers to the bottom package PSvfBGA: refers to the bottom package: Package Stackable Very thin Fine pitch Ball Grid Array PSfcCSP: refers to the bottom package: Package Stackable Flip Chip Chip Scale Package
History
In 2001, a Toshiba research team including T. Imoto, M. Matsui and C. Takubo developed a "System Block Module" wafer bonding process for manufacturing 3D integrated circuit (3D IC) packages. The earliest known commercial use of a 3D package-on-package chip was in Sony's PlayStation Portable (PSP) handheld game console, released in 20041.
The PSP hardware includes eDRAM (embedded DRAM) memory manufactured by Toshiba in a 3D package chip with two dies stacked vertically. Toshiba called it "semi-embedded DRAM" at the time, before later calling it a stacked "chip-on-chip" (CoC) solution.
In April 2007, Toshiba commercialized an eight-layer 3D chip package, the 16 GB THGAM embedded NAND flash memory chip, which was manufactured with eight stacked 2 GB NAND flash chips. The same month, ("Package-on-package secure module having anti-tamper mesh in the substrate of the upper package") was filed by Steven M. Pope and Ruben C. Zeta of Maxim Integrated.
In September 2007, Hynix Semiconductor introduced 24-layer 3D packaging technology, with a 16 GB flash memory chip that was manufactured with 24 stacked NAND flash chips using a wafer bonding process.
Further reading
Innovations push Package on Package into new markets, Flynn Carson, Semiconductor International, April 2010 Practical Components PoP Samples and Test Boards (daisy chains) The Story Behind This Industry Hit (Semiconductor International, 2007-06-01) Package-on-package is killer app for handsets (EETimes Article July 2008) "POP" Goes the Future (Assembly Magazine, 2008-09-30) Package on Package: Top and Bottom PoP Technologies PoP Solder Balling (Circuits Assembly Magazine, December 2010) The BeagleBoard uses a PoP processor Killer app for cell handsets EETimes 2008-10-20 TMV: An ‘Enabling’ Technology for Next-Gen PoP Requirements Semicon International 2008-11-04 Rolling with Solder Balls (Circuits Assembly Magazine, October 2010) Don't Drown the Part! (Circuits Assembly Magazine, August 2010) POP (Package On Package): An Ems Perspective On Assembly, Rework And Reliability 2009-02-12 Hamid Eslampour et al.Comparison of Advanced PoP Package Configurations, 2010 Electronic Components and Technology Conference (ECTC) Proceedings Package On Package Assembly Inspection & Quality Control Ebook, Bob Willis
Text derived from https://en.wikipedia.org/w/index.php?oldid=1345663618 under CC BY-SA 4.0; modifications have been made.
References
- ↩Wikipedia “package on a package” release date (×1) · confidence 0.95 revision URL