Packard Four

The Packard Motor Car Company introduced their first four-cylinder engine in 1903 initially as a top level car along with the Packard Model F.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Packard Motor Car Company introduced their first four-cylinder engine in 1903 initially as a top level car along with the Packard Model F. It was their only automobile offered and exclusively used a four-cylinder engine from 1903 until 1912 and established Packard as a luxury car maker, and was replaced by the 19131 Packard Six.

Engine and drivetrain

A plate clutch was blocked with the engine. Power was transmitted by a long shaft with universal joints to the three-speed sliding-gear manual gearbox with reverse. This was located in a housing at the rear axle which also contained the differential.

The car used shaft drive from the beginning, although many other high-powered cars at this time relied on double-chain drive. In 1909, redesigned linkage in the transmission made it possible for the reverse gear to be activated with the regular gear-shift. Since 1904, all Packards had had a separate lever for the reverse gear.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1371155742 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Packard Four” revision 1371155742 · retrieved 2026-10-20 date of establishment (×1) · confidence 0.95 revision URL