Lesson plan
Packet segmentation
Packet segmentation is the division of data into smaller protocol data units before transmission over a computer network. In the Internet protocol suite, the term is most commonly used for sender-side packetization at the transport layer, such as dividing a TCP byte stream into segments or fragmenting a large SCTP user message into multiple DATA chunks and packets. Segmentation is usually constrained by the maximum transmission unit (MTU) of the path and by protocol-specific limits such as the maximum segment size (MSS). Packet segmentation is distinct from IP fragmentation, which subdivides an already formed IP packet at the network layer, and from link-layer fragmentation performed below IP on some media.
Article summary
Packet segmentation is the division of data into smaller protocol data units before transmission over a computer network. In the Internet protocol suite, the term is most commonly used for sender-side packetization at the transport layer, such as dividing a TCP byte stream into segments or fragmenting a large SCTP user message into multiple DATA chunks and packets. Segmentation is usually constrained by the maximum transmission unit (MTU) of the path and by protocol-specific limits such as the maximum segment size (MSS). Packet segmentation is distinct from IP fragmentation, which subdivides an already formed IP packet at the network layer, and from link-layer fragmentation performed below IP on some media.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.