Lesson plan
Pair-conversion
In photonics, a pair-conversion instrument detects high-energy gamma rays by providing an environment—generally a thin foil of dense metal, commonly tungsten—in which they tend to generate electron-positron pairs, and then using standard particle physics techniques such as a microstrip detector to detect these particles. Usually there are several stacks of conversion foils and particle detectors placed on top of one another, so that the electron-positron pairs can be tracked as they pass through consecutive detectors; and at the bottom of the stack one commonly finds a calorimeter capable of measuring the energy of the electron and the positron and inferring the energy of the incoming gamma ray. An anticoincidence shield of some kind is needed so that charged particles entering the device from outside are not confused with electron-positron pairs generated in the conversion foils. In gamma-ray astronomy, one of the larger operational pair-conversion telescopes is the Large Area Telescope on the Gamma-ray Large Area Space Telescope (GLAST). Space-based pair-conversion detectors tend to make for rather expensive missions, since they unavoidably contain several hundred kilograms of lead or tungsten. [http://cosmology.berkeley.edu/inpac/inpac_retreat_slides/Hiroshima_3_9.pdf] has a slide illustrating the design of LAT.
Article summary
In photonics, a pair-conversion instrument detects high-energy gamma rays by providing an environment—generally a thin foil of dense metal, commonly tungsten—in which they tend to generate electron-positron pairs, and then using standard particle physics techniques such as a microstrip detector to detect these particles. Usually there are several stacks of conversion foils and particle detectors placed on top of one another, so that the electron-positron pairs can be tracked as they pass through consecutive detectors; and at the bottom of the stack one commonly finds a calorimeter capable of measuring the energy of the electron and the positron and inferring the energy of the incoming gamma ray. An anticoincidence shield of some kind is needed so that charged particles entering the device from outside are not confused with electron-positron pairs generated in the conversion foils. In gamma-ray astronomy, one of the larger operational pair-conversion telescopes is the Large Area Telescope on the Gamma-ray Large Area Space Telescope (GLAST). Space-based pair-conversion detectors tend to make for rather expensive missions, since they unavoidably contain several hundred kilograms of lead or tungsten. [http://cosmology.berkeley.edu/inpac/inpac_retreat_slides/Hiroshima_3_9.pdf] has a slide illustrating the design of LAT.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.