Panel antenna

A panel antenna, in its simplest form, consists of a dipole placed ahead of a flat-panel reflector.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A panel antenna, in its simplest form, consists of a dipole placed ahead of a flat-panel reflector.

Frequencies

Panel antennas are common at ultra high frequencies or UHF, where they are often used for cellular/mobile base stations or wireless networking due to their size and directional properties. At very high frequencies, such an antenna would be impractically large for most receiving applications unless implemented as no more than a two-bay design.

Some full-power radio stations do use multiple panel antenna bays, installed one above the other on the side of a tall antenna tower, to provide a directional transmitter pattern on these frequencies. The panel antenna is not practical at HF or lower frequencies due to its mechanical size.

Engineering and design

Most often, a panel antenna will be constructed as multiple "bays" - each consisting of an individual dipole placed before a shared reflector - with all of these bays connected in parallel to increase received signal strength. These forms of antennae were introduced in the late 1980s as a "C.F.R." by C.F.R. America (Circa 1989).

See also

Sector antenna Reflective array antenna

Text derived from https://en.wikipedia.org/w/index.php?oldid=1308040239 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.