Paper-based microfluidics
Paper-based microfluidics are microfluidic devices that consist of a series of hydrophilic cellulose or nitrocellulose fibers that transport fluid from an inlet through the porous medium to a desired outlet or region of the device, by…
≈ 2 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Paper-based microfluidics are microfluidic devices that consist of a series of hydrophilic cellulose or nitrocellulose fibers that transport fluid from an inlet through the porous medium to a desired outlet or region of the device, by means of capillary action. This technology builds on the conventional lateral flow test which is capable of detecting many infectious agents and chemical contaminants.
The main advantage of this is that it is largely a passively controlled device unlike more complex microfluidic devices. Development of paper-based microfluidic devices began in the early 21st century to meet a need for inexpensive and portable medical diagnostic systems.
The movement of fluid through a porous medium such as paper is governed by permeability (earth sciences), geometry and evaporation effects. Collectively these factors results in evaporation limited capillary penetration that can be tuned by controlling porosity and device geometry. Paper is a porous medium in which fluid is transported primarily by wicking and evaporation.
The capillary flow during wetting can be approximated by Washburn's equation, which is derived from Jurin's law and the Hagen–Poiseuille equation. The average velocity of fluid flow is generalized as, v=\frac{\gamma\cos\theta}{4\eta}\frac{1}{L} where \gamma is the surface tension, \theta the contact angle, \eta is the viscosity, and L is the distance traveled by the liquid.
More extensive models account for paper tortuosity, pore radius, and paper deformation. Once the medium is fully wetted, subsequent flow is laminar and follows Darcy's law. The average velocity of fluid flow is generalized as, v=-\frac{K}{\eta}\triangledown P where K is the medium permeability and \triangledown P is the pressure gradient.
One consequence of laminar flow is that mixing is difficult and based solely on diffusion, which is slower in porous systems.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1379005996 under CC BY-SA 4.0; modifications have been made.