Paper machine

A paper machine (or papermachine or paper-making machine) is an industrial machine which is used in the pulp and paper industry to create paper in large quantities at high speed. Modern paper-making machines are based on the principles of the Fourdrinier Machine, which uses a moving woven mesh to create a continuous paper web by filtering out the fibres held in a paper stock and producing a continuously moving wet mat of fibre. This is dried in the machine to produce a strong paper web. The basic process is an industrialised version of the historical process of hand paper-making, which could not satisfy the demands of developing modern society for large quantities of a printing and writing substrate. The first modern paper machine was invented by Louis-Nicolas Robert in France in 1799, and an improved version patented in Britain by Henry and Sealy Fourdrinier in 1806. The same process is used to produce paperboard on a paperboard machine.

A paper machine (or papermachine or paper-making machine) is an industrial machine which is used in the pulp and paper industry to create paper in large quantities at high speed. Modern paper-making machines are based on the principles of the Fourdrinier Machine, which uses a moving woven mesh to create a continuous paper web by filtering out the fibres held in a paper stock and producing a continuously moving wet mat of fibre. This is dried in the machine to produce a strong paper web. The basic process is an industrialised version of the historical process of hand paper-making, which could not satisfy the demands of developing modern society for large quantities of a printing and writing substrate. The first modern paper machine was invented by Louis-Nicolas Robert in France in 1799, and an improved version patented in Britain by Henry and Sealy Fourdrinier in 1806. The same process is used to produce paperboard on a paperboard machine.

Process sections

Paper machines are composed of different sections, depending on the product they are designed to make. Forming, pressing and drying are common to all types. A more complete list of sections is as follows: Forming section, commonly called the wet end or wire section, is a continuous rotating wire mesh which removes water from the paper by sucking it out of suspension via vacuum. Press section, where the wet fibre web passes between large rolls loaded under high pressure to squeeze out as much water as possible. Drying section, where the pressed sheet passes partly around, in a serpentine manner, a series of steam heated drying cylinders. Drying removes the water content down to a level of about 6%, where it will remain at typical indoor atmospheric conditions. Infra-red driers may also be also used to supplement cylinder drying where required. Size Press section, used on certain machines, is where the semi-dried paper is applied with a thin layer of starch and/ or other chemicals to improve several paper properties, reduce dusting and air permeability, increase stiffness, bursting strength and short span compression. The size press is typically used for printing and writing papers. Calender section, where the dried paper is smoothened under high loading and pressure. Only one nip (where the sheet is pressed between two rolls) is necessary in order to hold the sheet, which shrinks through the drying section and is held in tension between the press section (or breaker stack if used) and the calender. Extra nips give more smoothing, but at some expense to paper strength. The calendar section can either be a part of the machine (On-line) or in a separate part of the paper mill (Off-line). Reel section, where paper coming out of the machine is wound onto individual spools for further processing. There can also be a coating section to modify the surface characteristics with coatings such as kaolin clay, alternatively known as china clay. This section can be on-line or off-line as well.

Winder section

Reels of paper wound up at the end of the drying process are the full trimmed width, minus shrinkage from drying, of the web leaving the wire. In the winder section reels of paper are slit into smaller rolls of a width and roll diameter range specified by a customer order. To accomplish this the reel is placed on an unwind stand and the distances between the slitters (sharp cutting wheels), are adjusted to the specified widths for the orders. The winder is run until the desired roll diameter is reached and the rolls are labeled according to size and order before being sent to shipping or the warehouse. A reel usually has sufficient diameter to make two or more sets of rolls.

Notes

Patent for Louis-Nicolas Robert Technical Association of the Pulp and Paper Industry Institute of Paper Science and Technology at Georgia Tech Fourdrinier machine description from Paper Manufacturing in the United States, 1916 Biography of Henry Fourdrinier from Dictionary of National Biography, 1889 British Association of Paper Historians Video: Frogmore Mill in Apsley; Victorian era Fourdrinier machine

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378442722 under CC BY-SA 4.0; modifications have been made.