---
title: Parallel ATA
slug: parallel-ata
qid: 
snapshot: enwiki-001378364999
content_hash: 
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1378364999
tags: [100990625, 105405089, 125721489, 125876068, 129332224, 129332225, 129549526, 129549634, 129549830, 129550101, 131995772, 22906243, 22961457, 22985424, 23118434, 23556908, 23603337, 24623845, 24745107, 24745121, 24745122, 26748027, 28493674, 31347309, 31593451, 53799182, 68384674, 73108248, 81199107, 89061532, 9229844]
---

# Parallel ATA

> [!note] Provenance
> Snapshot `enwiki-001378364999` · content root `…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1378364999> · Licensed CC BY-SA 4.0

Parallel ATA (PATA), originally , also known as Integrated Drive Electronics (IDE), is a standard interface designed for IBM PC-compatible computers. It was first developed by Western Digital and Compaq in 1986 for compatible hard drives and CD or DVD drives. The connection is used for computer storage such as hard disks, high-capacity floppy disk variants, optical disks, and tape. The standard is maintained by the X3/INCITS committee. It uses the underlying (ATA) and Packet Interface (ATAPI) standards. The Parallel ATA standard is the result of a long history of incremental technical development, which began with the original AT Attachment interface, developed for use in early PC AT equipment. The ATA interface itself evolved in several stages from Western Digital's original Integrated Drive Electronics (IDE) interface. As a result, many near-synonyms for ATA/ATAPI and its previous incarnations are still in common informal use, in particular Extended IDE (EIDE) and Ultra ATA (UATA). After the introduction of SATA in 2003, the original ATA was renamed to Parallel ATA, or PATA for short. Parallel ATA cables have a maximum allowable length of . Because of this limit, the technology normally appears as an internal computer storage interface.…

Parallel ATA (PATA), originally , also known as Integrated Drive Electronics (IDE), is a standard interface designed for IBM PC-compatible computers. It was first developed by Western Digital and Compaq in 1986 for compatible hard drives and CD or DVD drives. The connection is used for computer storage such as hard disks, high-capacity floppy disk variants, optical disks, and tape. The standard is maintained by the X3/INCITS committee. It uses the underlying (ATA) and Packet Interface (ATAPI) standards. The Parallel ATA standard is the result of a long history of incremental technical development, which began with the original AT Attachment interface, developed for use in early PC AT equipment. The ATA interface itself evolved in several stages from Western Digital's original Integrated Drive Electronics (IDE) interface. As a result, many near-synonyms for ATA/ATAPI and its previous incarnations are still in common informal use, in particular Extended IDE (EIDE) and Ultra ATA (UATA). After the introduction of SATA in 2003, the original ATA was renamed to Parallel ATA, or PATA for short. Parallel ATA cables have a maximum allowable length of . Because of this limit, the technology normally appears as an internal computer storage interface. For many years, ATA provided the most common and the least expensive interface for this application but is now obsolete as it was replaced by SATA in the mid-2000s. A device can be locked in two modes: High security mode or Maximum security mode. Bit 8 in word 128 of the IDENTIFY response shows which mode the disk is in: 0 = High, 1 = Maximum. In High security mode, the device can be unlocked with either the User or Master password, using the "SECURITY UNLOCK DEVICE" ATA command. There is an attempt limit, normally set to 5, after which the disk must be power cycled or hard-reset before unlocking can be attempted again. Also in High security mode, the SECURITY ERASE UNIT command can be used with either the User or Master password. In Maximum security mode, the device can be unlocked only with the User password. If the User password is not available, the only remaining way to get at least the bare hardware back to a usable state is to issue the SECURITY ERASE PREPARE command, immediately followed by SECURITY ERASE UNIT. In Maximum security mode, the SECURITY ERASE UNIT command requires the Master password and will completely erase all data on the disk. Word 89 in the IDENTIFY response indicates how long the operation will take. While the ATA lock is intended to be impossible to defeat without a valid password, there are purported workarounds to unlock a device. For NVMe drives, the security features, including lock passwords, were defined in the OPAL standard. For sanitizing entire disks, the built-in Secure Erase command is effective when implemented correctly. There have been a few reported instances of failures to erase some or all data. Some laptops and business computers have a BIOS that can utilize Secure Erase to erase all data on the disk.
