Parallelepiped

In geometry, a parallelepiped is a three-dimensional figure formed by six parallelograms (the term rhomboid is also sometimes used with this meaning).

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In geometry, a parallelepiped is a three-dimensional figure formed by six parallelograms (the term rhomboid is also sometimes used with this meaning). By analogy, it relates to a parallelogram just as a cube relates to a square.

Three equivalent definitions of parallelepiped are *a hexahedron with three pairs of parallel faces, *a polyhedron with six faces (hexahedron), each of which is a parallelogram, and *a prism of which the base is a parallelogram. The rectangular cuboid (six rectangular faces), cube (six square faces), and the rhombohedron (six rhombus faces) are all special cases of parallelepiped.

Parallelepiped is now usually pronounced or ; traditionally, it was due to its etymology in Ancient Greek ( ) (with a short -i-), meaning a body "having parallel planes". Parallelepipeds are a subclass of the prismatoids.

In geometry, a parallelepiped is a three-dimensional figure formed by six parallelograms (the term rhomboid is also sometimes used with this meaning). By analogy, it relates to a parallelogram just as a cube relates to a square.

Three equivalent definitions of parallelepiped are a hexahedron with three pairs of parallel faces, a polyhedron with six faces (hexahedron), each of which is a parallelogram, and a prism of which the base is a parallelogram. The rectangular cuboid (six rectangular faces), cube (six square faces), and the rhombohedron (six rhombus faces) are all special cases of parallelepiped.

Parallelepiped is now usually pronounced or ; traditionally, it was due to its etymology in Ancient Greek ( ) (with a short -i-), meaning a body "having parallel planes". Parallelepipeds are a subclass of the prismatoids.

Properties

Any of the three pairs of parallel faces can be viewed as the base planes of the prism. A parallelepiped has three sets of four parallel edges; the edges within each set are of equal length. Parallelepipeds result from linear transformations of a cube (for the non-degenerate cases: the bijective linear transformations).

Since each face has point symmetry, a parallelepiped is a zonohedron. Also the whole parallelepiped has point symmetry (see also triclinic). Each face is, seen from the outside, the mirror image of the opposite face.

The faces are in general chiral, but the parallelepiped is not. A space-filling tessellation is possible with congruent copies of any parallelepiped.

Volume

A parallelepiped is a prism with a parallelogram as base. Hence the volume V of a parallelepiped is the product of the base area B and the height h (see diagram).

With B = \left|\mathbf a\right| \cdot \left|\mathbf b\right| \cdot \sin \gamma = \left|\mathbf a \times \mathbf b\right| (where \gamma is the angle between vectors \mathbf a and \mathbf b ), and h = \left|\mathbf c\right| \cdot \left|\cos \theta\right| (where \theta is the angle between vector \mathbf c and the normal to the base), one gets: V = B\cdot h = \left(\left|\mathbf a\right| \left|\mathbf b\right| \sin \gamma\right) \cdot \left|\mathbf c\right| \left|\cos \theta\right| = \left|\mathbf a \times \mathbf b\right| \left|\mathbf c\right| \left|\cos \theta\right| = \left|\left(\mathbf{a} \times \mathbf{b}\right) \cdot \mathbf{c}\right|. The mixed product of three vectors is called triple product.

It can be described by a determinant. Hence for \mathbf a=(a_1,a_2,a_3)^\mathsf{T}, ~\mathbf b=(b_1,b_2,b_3)^\mathsf{T}, ~\mathbf c=(c_1,c_2,c_3)^\mathsf{T}, the volume is: Another way to prove ( ) is to use the scalar component in the direction of \mathbf a\times\mathbf b of vector \mathbf c : \begin{align} V = \left|\mathbf a\times\mathbf b\right| \left|\operatorname{scal}_{\mathbf a \times \mathbf b} \mathbf c\right| = \left|\mathbf a\times\mathbf b\right| \frac{\left|\left(\mathbf a\times \mathbf b\right) \cdot \mathbf c\right|}{\left|\mathbf a\times \mathbf b\right|} = \left|\left(\mathbf a\times \mathbf b\right) \cdot \mathbf c\right|. \end{align} The result follows.

An alternative representation of the volume uses geometric properties (angles and edge lengths) only: where \alpha = \angle(\mathbf b, \mathbf c) , \beta = \angle(\mathbf a,\mathbf c) , \gamma = \angle(\mathbf a,\mathbf b) , and a,b,c are the edge lengths. Corresponding tetrahedron The volume of any tetrahedron that shares three converging edges of a parallelepiped is equal to one sixth of the volume of that parallelepiped (see proof). \begin{align} A &= 2 \cdot \left(|\mathbf a \times \mathbf b| + |\mathbf a \times \mathbf c| + |\mathbf b \times \mathbf c|\right) \\ &= 2\left(ab\sin\gamma+ bc\sin\alpha+ca\sin\beta\right). \end{align} (For labeling: see previous section.)

Special cases by symmetry

The parallelepiped with O h symmetry is known as a cube, which has six congruent square faces. The parallelepiped with D 4h symmetry is known as a square cuboid, which has two square faces and four congruent rectangular faces. The parallelepiped with D 3d symmetry is known as a trigonal trapezohedron, which has six congruent rhombic faces (also called an isohedral rhombohedron).

For parallelepipeds with D 2h symmetry, there are two cases: Rectangular cuboid: it has six rectangular faces (also called a rectangular parallelepiped, or sometimes simply a cuboid). Right rhombic prism: it has two rhombic faces and four congruent rectangular faces.

For parallelepipeds with C 2h symmetry, there are two cases: Right parallelogrammic prism: it has four rectangular faces and two parallelogrammic faces. Oblique rhombic prism: it has two rhombic faces, while of the other faces, two adjacent ones are equal and the other two also (the two pairs are each other's mirror image).

Perfect parallelepiped

A perfect parallelepiped is a parallelepiped with integer-length edges, face diagonals, and space diagonals. In 2009, dozens of perfect parallelepipeds were shown to exist, answering an open question of Richard Guy. One example has edges 271, 106, and 103, minor face diagonals 101, 266, and 255, major face diagonals 183, 312, and 323, and space diagonals 374, 300, 278, and 272.

Some perfect parallelepipeds having two rectangular faces are known. But it is not known whether there exist any with all faces rectangular; such a case would be a perfect cuboid. V = \left\| v_1 \wedge \cdots \wedge v_n \right\| .

If , this amounts to the absolute value of the determinant of matrix formed by the components of the vectors. A formula to compute the volume of an -parallelotope in \R^n , whose vertices are V_0,V_1, \ldots, V_n , is \mathrm{Vol}(P) = \left|\det \left(\left[V_0\ 1\right]^\mathsf{T}, \left[V_1\ 1\right]^\mathsf{T}, \ldots, \left[V_n\ 1\right]^\mathsf{T}\right)\right|, where [V_i\ 1] is the row vector formed by the concatenation of the components of V_i and 1.

Similarly, the volume of any n-simplex that shares n converging edges of a parallelotope has a volume equal to one 1/n! of the volume of that parallelotope.

See also

Lists of shapes

References

Coxeter, H. S. M. Regular Polytopes, 3rd ed. New York: Dover, p. 122, 1973. (He defines parallelotope as a generalization of a parallelogram and parallelepiped in n-dimensions.)

Paper model parallelepiped (net)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1368340069 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.