Partition coefficient

Uses your system voice; voice and rate in settings.

Snapshot

≈ 11 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

that allows shaking and sampling, from which log P is determined. Here, the green substance has a greater solubility in the lower layer than in the upper layer. In the physical sciences, a partition coefficient (P) or distribution coefficient (D) is the ratio of concentrations of a compound in a mixture of two immiscible solvents at equilibrium. This ratio is therefore a comparison of the solubilities of the solute in these two liquids. The partition coefficient generally refers to the concentration ratio of un-ionized species of compound, whereas the distribution coefficient refers to the concentration ratio of all species of the compound (ionized plus un-ionized). In the chemical and pharmaceutical sciences, both phases usually are solvents. Most commonly, one of the solvents is water, while the second is hydrophobic, such as 1-octanol. Hence the partition coefficient measures how hydrophilic ("water-loving") or hydrophobic ("water-fearing") a chemical substance is. Partition coefficients are useful in estimating the distribution of drugs within the body. Hydrophobic drugs with high octanol-water partition coefficients are mainly distributed to hydrophobic areas such as lipid bilayers of cells. Conversely, hydrophilic drugs (low octanol/water partition coefficients) are found primarily in aqueous regions such as blood serum.…

that allows shaking and sampling, from which log P is determined. Here, the green substance has a greater solubility in the lower layer than in the upper layer.]] In the physical sciences, a partition coefficient (P) or distribution coefficient (D) is the ratio of concentrations of a compound in a mixture of two immiscible solvents at equilibrium. This ratio is therefore a comparison of the solubilities of the solute in these two liquids. The partition coefficient generally refers to the concentration ratio of un-ionized species of compound, whereas the distribution coefficient refers to the concentration ratio of all species of the compound (ionized plus un-ionized). In the chemical and pharmaceutical sciences, both phases usually are solvents. Most commonly, one of the solvents is water, while the second is hydrophobic, such as 1-octanol. Hence the partition coefficient measures how hydrophilic ("water-loving") or hydrophobic ("water-fearing") a chemical substance is. Partition coefficients are useful in estimating the distribution of drugs within the body. Hydrophobic drugs with high octanol-water partition coefficients are mainly distributed to hydrophobic areas such as lipid bilayers of cells. Conversely, hydrophilic drugs (low octanol/water partition coefficients) are found primarily in aqueous regions such as blood serum. If one of the solvents is a gas and the other a liquid, a gas/liquid partition coefficient can be determined. For example, the blood/gas partition coefficient of a general anesthetic measures how easily the anesthetic passes from gas to blood. Partition coefficients can also be defined when one of the phases is solid, for instance, when one phase is a molten metal and the second is a solid metal, or when both phases are solids. The partitioning of a substance into a solid results in a solid solution. Partition coefficients can be measured experimentally in various ways (by shake-flask, HPLC, etc.) or estimated by calculation based on a variety of methods (fragment-based, atom-based, etc.). If a substance is present as several chemical species in the partition system due to association or dissociation, each species is assigned its own K ow value. A related value, D, does not distinguish between different species, only indicating the concentration ratio of the substance between the two phases. \log P_\text{oct/wat} = \log_{10}\left(\frac{\big[\text{solute}\big]_\text{octanol}^\text{un-ionized}}{\big[\text{solute}\big]_\text{water}^\text{un-ionized}}\right). To a first approximation, the non-polar phase in such experiments is usually dominated by the un-ionized form of the solute, which is electrically neutral, though this may not be true for the aqueous phase. To measure the partition coefficient of ionizable solutes, the pH of the aqueous phase is adjusted such that the predominant form of the compound in solution is the un-ionized, or its measurement at another pH of interest requires consideration of all species, un-ionized and ionized (see following). A corresponding partition coefficient for ionizable compounds, abbreviated log P I , is derived for cases where there are dominant ionized forms of the molecule, such that one must consider partition of all forms, ionized and un-ionized, between the two phases (as well as the interaction of the two equilibria, partition and ionization). M is used to indicate the number of ionized forms; for the -th form ( ) the logarithm of the corresponding partition coefficient, \log P_\text{oct/wat}^I , is defined in the same manner as for the un-ionized form. For instance, for an octanol–water partition, it is \log\ P_\text{oct/wat}^\mathrm{I} = \log_{10}\left(\frac{\big[\text{solute}\big]_\text{octanol}^I}{\big[\text{solute}\big]_\text{water}^I}\right). To distinguish between this and the standard, un-ionized, partition coefficient, the un-ionized is often assigned the symbol log P 0 , such that the indexed \log P_\text{oct/wat}^I expression for ionized solutes becomes simply an extension of this, into the range of values . The distribution coefficient, log D, is the ratio of the sum of the concentrations of all forms of the compound (ionized plus un-ionized) in each of the two phases, one essentially always aqueous; as such, it depends on the pH of the aqueous phase, and log D = log P for non-ionizable compounds at any pH. For measurements of distribution coefficients, the pH of the aqueous phase is buffered to a specific value such that the pH is not significantly perturbed by the introduction of the compound. The value of each log D is then determined as the logarithm of a ratio—of the sum of the experimentally measured concentrations of the solute's various forms in one solvent, to the sum of such concentrations of its forms in the other solvent; it can be expressed as \log D_\text{oct/wat} = \log_{10}\left(\frac{\big[\text{solute}\big]_\text{octanol}^\text{ionized} + \big[\text{solute}\big]_\text{octanol}^\text{un-ionized}}{\big[\text{solute}\big]_\text{water}^\text{ionized} + \big[\text{solute}\big]_\text{water}^\text{un-ionized}}\right). In the above formula, the superscripts "ionized" each indicate the sum of concentrations of all ionized species in their respective phases. In addition, since log D is pH-dependent, the pH at which the log D was measured must be specified. In areas such as drug discovery—areas involving partition phenomena in biological systems such as the human body—the log D at the physiologic pH = 7.4 is of particular interest. It is often convenient to express the log D in terms of P I , defined above (which includes P 0 as state ), thus covering both un-ionized and ionized species. For example, in octanol–water: \log D_\text{oct/wat} = \log_{10}\left(\sum_{I=0}^M f^I P_\text{oct/wat}^I \right), which sums the individual partition coefficients (not their logarithms), and where f^I indicates the pH-dependent mole fraction of the -th form (of the solute) in the aqueous phase, and other variables are defined as previously.

Atom-based

Standard approaches of this type, using atomic contributions, have been named by those formulating them with a prefix letter: AlogP, XlogP, MlogP, etc. A conventional method for predicting log P through this type of method is to parameterize the distribution coefficient contributions of various atoms to the overall molecular partition coefficient, which produces a parametric model. This parametric model can be estimated using constrained least-squares estimation, using a training set of compounds with experimentally measured partition coefficients. In order to get reasonable correlations, the most common elements contained in drugs (hydrogen, carbon, oxygen, sulfur, nitrogen, and halogens) are divided into several different atom types depending on the environment of the atom within the molecule. While this method is generally the least accurate, the advantage is that it is the most general, being able to provide at least a rough estimate for a wide variety of molecules.

Fragment-based

The most common of these uses a group contribution method and is termed cLogP. It has been shown that the log P of a compound can be determined by the sum of its non-overlapping molecular fragments (defined as one or more atoms covalently bound to each other within the molecule). Fragmentary log P values have been determined in a statistical method analogous to the atomic methods (least-squares fitting to a training set). In addition, Hammett-type corrections are included to account of electronic and steric effects. This method in general gives better results than atomic-based methods, but cannot be used to predict partition coefficients for molecules containing unusual functional groups for which the method has not yet been parameterized (most likely because of the lack of experimental data for molecules containing such functional groups).

Knowledge-based

A typical data-mining-based prediction uses support-vector machines, decision trees, or neural networks. This method is usually very successful for calculating log P values when used with compounds that have similar chemical structures and known log P values. Molecule mining approaches apply a similarity-matrix-based prediction or an automatic fragmentation scheme into molecular substructures. Furthermore, there exist also approaches using maximum common subgraph searches or molecule kernels.

Log D from log P and pK a

For cases where the molecule is un-ionized: \log D \cong \log P. For other cases, estimation of log D at a given pH, from log P and the known mole fraction of the un-ionized form, f^0 , in the case where partition of ionized forms into non-polar phase can be neglected, can be formulated as \log D \cong \log P + \log \left(f^0\right). The following approximate expressions are valid only for monoprotic acids and bases: \begin{align} \log D_\text{acids} &\cong \log P + \log\left[\frac{1}{1 + 10^{\mathrm{p}H - \mathrm{p}K_a}}\right], \\ \log D_\text{bases} &\cong \log P + \log\left[\frac{1}{1 + 10^{\mathrm{p}K_a - \mathrm{pH}}}\right]. \end{align} Further approximations for when the compound is largely ionized: for acids with \mathrm{pH} - \mathrm{p}K_a > 1 , \log D_\text{acids} \cong \log P + \mathrm{p}K_a - \mathrm{pH} , for bases with \mathrm{p}K_a - \mathrm{pH} > 1 , \log D_\text{bases} \cong \log P - \mathrm{p}K_a + \mathrm{pH} . For prediction of pK a , which in turn can be used to estimate log D, Hammett type equations have frequently been applied.

Log P from log S

If the solubility, S, of an organic compound is known or predicted in both water and 1-octanol, then log P can be estimated as \log P = \log S_\text{o} - \log S_\text{w}. There are a variety of approaches to predict solubilities, and so log S.

Octanol-water partition coefficient

The partition coefficient between n-Octanol and water is known as the n-octanol-water partition coefficient, or K ow . It is also frequently referred to by the symbol P, especially in the English literature. It is also known as n-octanol-water partition ratio. K ow , being a type of partition coefficient, serves as a measure of the relationship between lipophilicity (fat solubility) and hydrophilicity (water solubility) of a substance. The value is greater than one if a substance is more soluble in fat-like solvents such as n-octanol, and less than one if it is more soluble in water.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1357642423 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.